C# Класс Pchp.Library.PerlRegex.RegexRunner

Показать файл Открыть проект Примеры использования класса

Защищенные свойства (Protected)

Свойство	Тип	Описание
runcrawl	int[]
runcrawlpos	int
runmatch	Match
runregex	Regex
runstack	int[]
runstackpos	int
runtext	string
runtextbeg	int
runtextend	int
runtextpos	int
runtextstart	int
runtrack	int[]
runtrackcount	int
runtrackpos	int

Защищенные методы

Метод	Описание
Capture ( int capnum, int start, int end ) : void	Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).
CharInClass ( char ch, string charClass ) : bool
CharInSet ( char ch, string set, string category ) : bool
CheckTimeout ( ) : void
Crawl ( int i ) : void	Save a number on the longjump unrolling stack
Crawlpos ( ) : int	Get the height of the stack
DoubleCrawl ( ) : void	Increases the size of the longjump unrolling stack.
DoubleStack ( ) : void	Called by the implementation of Go() to increase the size of the grouping stack.
DoubleTrack ( ) : void	Called by the implementation of Go() to increase the size of the backtracking stack.
EnsureStorage ( ) : void	Called by the implementation of Go() to increase the size of storage
FindFirstChar ( ) : bool	The responsibility of FindFirstChar() is to advance runtextpos until it is at the next position which is a candidate for the beginning of a successful match.
Go ( ) : void	The responsibility of Go() is to run the regular expression at runtextpos and call Capture() on all the captured subexpressions, then to leave runtextpos at the ending position. It should leave runtextpos where it started if there was no match.
InitTrackCount ( ) : void	InitTrackCount must initialize the runtrackcount field; this is used to know how large the initial runtrack and runstack arrays must be.
IsBoundary ( int index, int startpos, int endpos ) : bool	Called by the implementation of Go() to decide whether the pos at the specified index is a boundary or not. It's just not worth emitting inline code for this logic.
IsECMABoundary ( int index, int startpos, int endpos ) : bool
IsMatched ( int cap ) : bool	Call out to runmatch to get around visibility issues
MatchIndex ( int cap ) : int	Call out to runmatch to get around visibility issues
MatchLength ( int cap ) : int	Call out to runmatch to get around visibility issues
Popcrawl ( ) : int	Remove a number from the longjump unrolling stack
RegexRunner ( ) : System
Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick ) : Match	Scans the string to find the first match. Uses the Match object both to feed text in and as a place to store matches that come out. All the action is in the abstract Go() method defined by subclasses. Our responsibility is to load up the class members (as done here) before calling Go. The optimizer can compute a set of candidate starting characters, and we could use a separate method Skip() that will quickly scan past any characters that we know can't match.
Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick, System.TimeSpan timeout ) : Match
TransferCapture ( int capnum, int uncapnum, int start, int end ) : void	Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).
Uncapture ( ) : void

Приватные методы

Метод	Описание
DoCheckTimeout ( ) : void
DumpState ( ) : void	Dump the current state
InitMatch ( ) : void	Initializes all the data members that are used by Go()
StackDescription ( int a, int index ) : string
StartTimeoutWatch ( ) : void
TextposDescription ( ) : string
TidyMatch ( bool quick ) : Match	Put match in its canonical form before returning it.

Описание методов

Capture() защищенный Метод

Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).

protected Capture ( int capnum, int start, int end ) : void
capnum	int
start	int
end	int
Результат	void

CharInClass() защищенный статический Метод

protected static CharInClass ( char ch, string charClass ) : bool
ch	char
charClass	string
Результат	bool

CharInSet() защищенный статический Метод

protected static CharInSet ( char ch, string set, string category ) : bool
ch	char
set	string
category	string
Результат	bool

CheckTimeout() защищенный Метод

protected CheckTimeout ( ) : void
Результат	void

Crawl() защищенный Метод

Save a number on the longjump unrolling stack

protected Crawl ( int i ) : void
i	int
Результат	void

Crawlpos() защищенный Метод

Get the height of the stack

protected Crawlpos ( ) : int
Результат	int

DoubleCrawl() защищенный Метод

Increases the size of the longjump unrolling stack.

protected DoubleCrawl ( ) : void
Результат	void

DoubleStack() защищенный Метод

Called by the implementation of Go() to increase the size of the grouping stack.

protected DoubleStack ( ) : void
Результат	void

DoubleTrack() защищенный Метод

Called by the implementation of Go() to increase the size of the backtracking stack.

protected DoubleTrack ( ) : void
Результат	void

EnsureStorage() защищенный Метод

Called by the implementation of Go() to increase the size of storage

protected EnsureStorage ( ) : void
Результат	void

FindFirstChar() защищенный абстрактный Метод

The responsibility of FindFirstChar() is to advance runtextpos until it is at the next position which is a candidate for the beginning of a successful match.

protected abstract FindFirstChar ( ) : bool
Результат	bool

Go() защищенный абстрактный Метод

The responsibility of Go() is to run the regular expression at runtextpos and call Capture() on all the captured subexpressions, then to leave runtextpos at the ending position. It should leave runtextpos where it started if there was no match.

protected abstract Go ( ) : void
Результат	void

InitTrackCount() защищенный абстрактный Метод

InitTrackCount must initialize the runtrackcount field; this is used to know how large the initial runtrack and runstack arrays must be.

protected abstract InitTrackCount ( ) : void
Результат	void

IsBoundary() защищенный Метод

Called by the implementation of Go() to decide whether the pos at the specified index is a boundary or not. It's just not worth emitting inline code for this logic.

protected IsBoundary ( int index, int startpos, int endpos ) : bool
index	int
startpos	int
endpos	int
Результат	bool

IsECMABoundary() защищенный Метод

protected IsECMABoundary ( int index, int startpos, int endpos ) : bool
index	int
startpos	int
endpos	int
Результат	bool

IsMatched() защищенный Метод

Call out to runmatch to get around visibility issues

protected IsMatched ( int cap ) : bool
cap	int
Результат	bool

MatchIndex() защищенный Метод

Call out to runmatch to get around visibility issues

protected MatchIndex ( int cap ) : int
cap	int
Результат	int

MatchLength() защищенный Метод

Call out to runmatch to get around visibility issues

protected MatchLength ( int cap ) : int
cap	int
Результат	int

Popcrawl() защищенный Метод

Remove a number from the longjump unrolling stack

protected Popcrawl ( ) : int
Результат	int

RegexRunner() защищенный Метод

protected RegexRunner ( ) : System
Результат	System

Scan() защищенный Метод

Scans the string to find the first match. Uses the Match object both to feed text in and as a place to store matches that come out. All the action is in the abstract Go() method defined by subclasses. Our responsibility is to load up the class members (as done here) before calling Go. The optimizer can compute a set of candidate starting characters, and we could use a separate method Skip() that will quickly scan past any characters that we know can't match.

protected Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick ) : Match
regex	Regex
text	string
textbeg	int
textend	int
textstart	int
prevlen	int
quick	bool
Результат	Match

Scan() защищенный Метод

protected Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick, System.TimeSpan timeout ) : Match
regex	Regex
text	string
textbeg	int
textend	int
textstart	int
prevlen	int
quick	bool
timeout	System.TimeSpan
Результат	Match

TransferCapture() защищенный Метод

Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).

protected TransferCapture ( int capnum, int uncapnum, int start, int end ) : void
capnum	int
uncapnum	int
start	int
end	int
Результат	void

Uncapture() защищенный Метод

protected Uncapture ( ) : void
Результат	void

Описание свойств

runcrawl защищенное свойство

protected int[] runcrawl
Результат	int[]

runcrawlpos защищенное свойство

protected int runcrawlpos
Результат	int

runmatch защищенное свойство

protected Match,Pchp.Library.PerlRegex runmatch
Результат	Match

runregex защищенное свойство

protected Regex runregex
Результат	Regex

runstack защищенное свойство

protected int[] runstack
Результат	int[]

runstackpos защищенное свойство

protected int runstackpos
Результат	int

runtext защищенное свойство

protected string runtext
Результат	string

runtextbeg защищенное свойство

protected int runtextbeg
Результат	int

runtextend защищенное свойство

protected int runtextend
Результат	int

runtextpos защищенное свойство

protected int runtextpos
Результат	int

runtextstart защищенное свойство

protected int runtextstart
Результат	int

runtrack защищенное свойство

protected int[] runtrack
Результат	int[]

runtrackcount защищенное свойство

protected int runtrackcount
Результат	int

runtrackpos защищенное свойство

protected int runtrackpos
Результат	int