C# 클래스 Pchp.Library.PerlRegex.RegexRunner

파일 보기 프로젝트 열기: iolevel/peachpie 1 사용 예제들

보호된 프로퍼티들

프로퍼티	타입	설명
runcrawl	int[]
runcrawlpos	int
runmatch	Match
runregex	Regex
runstack	int[]
runstackpos	int
runtext	string
runtextbeg	int
runtextend	int
runtextpos	int
runtextstart	int
runtrack	int[]
runtrackcount	int
runtrackpos	int

보호된 메소드들

메소드	설명
Capture ( int capnum, int start, int end ) : void	Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).
CharInClass ( char ch, string charClass ) : bool
CharInSet ( char ch, string set, string category ) : bool
CheckTimeout ( ) : void
Crawl ( int i ) : void	Save a number on the longjump unrolling stack
Crawlpos ( ) : int	Get the height of the stack
DoubleCrawl ( ) : void	Increases the size of the longjump unrolling stack.
DoubleStack ( ) : void	Called by the implementation of Go() to increase the size of the grouping stack.
DoubleTrack ( ) : void	Called by the implementation of Go() to increase the size of the backtracking stack.
EnsureStorage ( ) : void	Called by the implementation of Go() to increase the size of storage
FindFirstChar ( ) : bool	The responsibility of FindFirstChar() is to advance runtextpos until it is at the next position which is a candidate for the beginning of a successful match.
Go ( ) : void	The responsibility of Go() is to run the regular expression at runtextpos and call Capture() on all the captured subexpressions, then to leave runtextpos at the ending position. It should leave runtextpos where it started if there was no match.
InitTrackCount ( ) : void	InitTrackCount must initialize the runtrackcount field; this is used to know how large the initial runtrack and runstack arrays must be.
IsBoundary ( int index, int startpos, int endpos ) : bool	Called by the implementation of Go() to decide whether the pos at the specified index is a boundary or not. It's just not worth emitting inline code for this logic.
IsECMABoundary ( int index, int startpos, int endpos ) : bool
IsMatched ( int cap ) : bool	Call out to runmatch to get around visibility issues
MatchIndex ( int cap ) : int	Call out to runmatch to get around visibility issues
MatchLength ( int cap ) : int	Call out to runmatch to get around visibility issues
Popcrawl ( ) : int	Remove a number from the longjump unrolling stack
RegexRunner ( ) : System
Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick ) : Match	Scans the string to find the first match. Uses the Match object both to feed text in and as a place to store matches that come out. All the action is in the abstract Go() method defined by subclasses. Our responsibility is to load up the class members (as done here) before calling Go. The optimizer can compute a set of candidate starting characters, and we could use a separate method Skip() that will quickly scan past any characters that we know can't match.
Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick, System.TimeSpan timeout ) : Match
TransferCapture ( int capnum, int uncapnum, int start, int end ) : void	Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).
Uncapture ( ) : void

비공개 메소드들

메소드	설명
DoCheckTimeout ( ) : void
DumpState ( ) : void	Dump the current state
InitMatch ( ) : void	Initializes all the data members that are used by Go()
StackDescription ( int a, int index ) : string
StartTimeoutWatch ( ) : void
TextposDescription ( ) : string
TidyMatch ( bool quick ) : Match	Put match in its canonical form before returning it.

메소드 상세

Capture() 보호된 메소드

Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).

protected Capture ( int capnum, int start, int end ) : void
capnum	int
start	int
end	int
리턴	void

CharInClass() 보호된 정적인 메소드

protected static CharInClass ( char ch, string charClass ) : bool
ch	char
charClass	string
리턴	bool

CharInSet() 보호된 정적인 메소드

protected static CharInSet ( char ch, string set, string category ) : bool
ch	char
set	string
category	string
리턴	bool

CheckTimeout() 보호된 메소드

protected CheckTimeout ( ) : void
리턴	void

Crawl() 보호된 메소드

Save a number on the longjump unrolling stack

protected Crawl ( int i ) : void
i	int
리턴	void

Crawlpos() 보호된 메소드

Get the height of the stack

protected Crawlpos ( ) : int
리턴	int

DoubleCrawl() 보호된 메소드

Increases the size of the longjump unrolling stack.

protected DoubleCrawl ( ) : void
리턴	void

DoubleStack() 보호된 메소드

Called by the implementation of Go() to increase the size of the grouping stack.

protected DoubleStack ( ) : void
리턴	void

DoubleTrack() 보호된 메소드

Called by the implementation of Go() to increase the size of the backtracking stack.

protected DoubleTrack ( ) : void
리턴	void

EnsureStorage() 보호된 메소드

Called by the implementation of Go() to increase the size of storage

protected EnsureStorage ( ) : void
리턴	void

FindFirstChar() 보호된 추상적인 메소드

The responsibility of FindFirstChar() is to advance runtextpos until it is at the next position which is a candidate for the beginning of a successful match.

protected abstract FindFirstChar ( ) : bool
리턴	bool

Go() 보호된 추상적인 메소드

The responsibility of Go() is to run the regular expression at runtextpos and call Capture() on all the captured subexpressions, then to leave runtextpos at the ending position. It should leave runtextpos where it started if there was no match.

protected abstract Go ( ) : void
리턴	void

InitTrackCount() 보호된 추상적인 메소드

InitTrackCount must initialize the runtrackcount field; this is used to know how large the initial runtrack and runstack arrays must be.

protected abstract InitTrackCount ( ) : void
리턴	void

IsBoundary() 보호된 메소드

Called by the implementation of Go() to decide whether the pos at the specified index is a boundary or not. It's just not worth emitting inline code for this logic.

protected IsBoundary ( int index, int startpos, int endpos ) : bool
index	int
startpos	int
endpos	int
리턴	bool

IsECMABoundary() 보호된 메소드

protected IsECMABoundary ( int index, int startpos, int endpos ) : bool
index	int
startpos	int
endpos	int
리턴	bool

IsMatched() 보호된 메소드

Call out to runmatch to get around visibility issues

protected IsMatched ( int cap ) : bool
cap	int
리턴	bool

MatchIndex() 보호된 메소드

Call out to runmatch to get around visibility issues

protected MatchIndex ( int cap ) : int
cap	int
리턴	int

MatchLength() 보호된 메소드

Call out to runmatch to get around visibility issues

protected MatchLength ( int cap ) : int
cap	int
리턴	int

Popcrawl() 보호된 메소드

Remove a number from the longjump unrolling stack

protected Popcrawl ( ) : int
리턴	int

RegexRunner() 보호된 메소드

protected RegexRunner ( ) : System
리턴	System

Scan() 보호된 메소드

Scans the string to find the first match. Uses the Match object both to feed text in and as a place to store matches that come out. All the action is in the abstract Go() method defined by subclasses. Our responsibility is to load up the class members (as done here) before calling Go. The optimizer can compute a set of candidate starting characters, and we could use a separate method Skip() that will quickly scan past any characters that we know can't match.

protected Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick ) : Match
regex	Regex
text	string
textbeg	int
textend	int
textstart	int
prevlen	int
quick	bool
리턴	Match

Scan() 보호된 메소드

protected Scan ( Regex regex, string text, int textbeg, int textend, int textstart, int prevlen, bool quick, System.TimeSpan timeout ) : Match
regex	Regex
text	string
textbeg	int
textend	int
textstart	int
prevlen	int
quick	bool
timeout	System.TimeSpan
리턴	Match

TransferCapture() 보호된 메소드

Called by Go() to capture a subexpression. Note that the capnum used here has already been mapped to a non-sparse index (by the code generator RegexWriter).

protected TransferCapture ( int capnum, int uncapnum, int start, int end ) : void
capnum	int
uncapnum	int
start	int
end	int
리턴	void

Uncapture() 보호된 메소드

protected Uncapture ( ) : void
리턴	void

프로퍼티 상세

runcrawl 보호되어 있는 프로퍼티

protected int[] runcrawl
리턴	int[]

runcrawlpos 보호되어 있는 프로퍼티

protected int runcrawlpos
리턴	int

runmatch 보호되어 있는 프로퍼티

protected Match,Pchp.Library.PerlRegex runmatch
리턴	Match

runregex 보호되어 있는 프로퍼티

protected Regex runregex
리턴	Regex

runstack 보호되어 있는 프로퍼티

protected int[] runstack
리턴	int[]

runstackpos 보호되어 있는 프로퍼티

protected int runstackpos
리턴	int

runtext 보호되어 있는 프로퍼티

protected string runtext
리턴	string

runtextbeg 보호되어 있는 프로퍼티

protected int runtextbeg
리턴	int

runtextend 보호되어 있는 프로퍼티

protected int runtextend
리턴	int

runtextpos 보호되어 있는 프로퍼티

protected int runtextpos
리턴	int

runtextstart 보호되어 있는 프로퍼티

protected int runtextstart
리턴	int

runtrack 보호되어 있는 프로퍼티

protected int[] runtrack
리턴	int[]

runtrackcount 보호되어 있는 프로퍼티

protected int runtrackcount
리턴	int

runtrackpos 보호되어 있는 프로퍼티

protected int runtrackpos
리턴	int