C# 클래스 HelixToolkit.Wpf.MeshBuilder

Builds MeshGeometry3D objects.

Performance tips for MeshGeometry3D (See MSDN)

High impact: Mesh animation—changing the individual vertices of a mesh on a per-frame basis—is not always efficient in Windows Presentation Foundation (WPF). To minimize the performance impact of change notifications when each vertex is modified, detach the mesh from the visual tree before performing per-vertex modification. Once the mesh has been modified, reattach it to the visual tree. Also, try to minimize the size of meshes that will be animated in this way.

Medium impact: When a mesh is defined as abutting triangles with shared vertices and those vertices have the same position, normal, and texture coordinates, define each shared vertex only once and then define your triangles by index with TriangleIndices.

Low impact: To minimize the construction time of large collections in Windows Presentation Foundation (WPF), such as a MeshGeometry3D’s Positions, Normal vectors, TextureCoordinates, and TriangleIndices, pre-size the collections before value population. If possible, pass the collections’ constructors prepopulated data structures such as arrays or Lists.

파일 보기 프로젝트 열기: litdev1/LitDev 1 사용 예제들

공개 메소드들

메소드	설명
AddArrow ( System.Windows.Media.Media3D.Point3D point1, System.Windows.Media.Media3D.Point3D point2, double diameter, double headLength = 3, double headDiameter = 2, int thetaDiv = 18 ) : void	Adds an arrow to the mesh.
AddBoundingBox ( System.Windows.Media.Media3D.Rect3D boundingBox, double diameter ) : void	Adds the edges of a bounding box as cylinders.
AddBox ( System.Windows.Media.Media3D.Point3D center, double xlength, double ylength, double zlength ) : void	Adds a box aligned with the X, Y and Z axes.
AddBox ( System.Windows.Media.Media3D.Point3D center, double xlength, double ylength, double zlength, BoxFaces faces ) : void	Adds a box with the specified faces, aligned with the X, Y and Z axes.
AddBox ( System.Windows.Media.Media3D.Rect3D rectangle ) : void	Adds a box aligned with the X, Y and Z axes.
AddCone ( System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Point3D apex, double baseRadius, bool baseCap, int thetaDiv ) : void	Adds a cone.
AddCone ( System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Vector3D direction, double baseRadius, double topRadius, double height, bool baseCap, bool topCap, int thetaDiv ) : void	Adds a (possibly truncated) cone. See http://en.wikipedia.org/wiki/Cone_(geometry).
AddCubeFace ( System.Windows.Media.Media3D.Point3D center, System.Windows.Media.Media3D.Vector3D normal, System.Windows.Media.Media3D.Vector3D up, double dist, double width, double height ) : void	Adds a cube face.
AddCylinder ( System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, double diameter, int thetaDiv ) : void	Adds a cylinder to the mesh. See http://en.wikipedia.org/wiki/Cylinder_(geometry).
AddEdges ( IList points, IList edges, double diameter, int thetaDiv ) : void	Adds a collection of edges as cylinders.
AddExtrudedGeometry ( IList points, System.Windows.Media.Media3D.Vector3D xaxis, System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1 ) : void	Adds an extruded surface of the specified curve. The y-axis is determined by the cross product between the specified x-axis and the p1-p0 vector.
AddLoftedGeometry ( IList positionsList, IList normalList, IList textureCoordinateList ) : void	Adds a lofted surface. See http://en.wikipedia.org/wiki/Loft_(3D).
AddNode ( System.Windows.Media.Media3D.Point3D position, System.Windows.Media.Media3D.Vector3D normal, Point textureCoordinate ) : void	Adds a single node.
AddPipe ( System.Windows.Media.Media3D.Point3D point1, System.Windows.Media.Media3D.Point3D point2, double innerDiameter, double diameter, int thetaDiv ) : void	Adds a (possibly hollow) pipe.
AddPolygon ( IList points ) : void	Adds a polygon. If the number of points is greater than 4, a triangle fan is used.
AddPolygon ( IList vertexIndices ) : void	Adds a polygon specified by vertex index (uses a triangle fan).
AddPolygonByCuttingEars ( IList vertexIndices ) : void	Adds a polygon defined by vertex indices (uses the cutting ears algorithm).
AddPyramid ( System.Windows.Media.Media3D.Point3D center, double sideLength, double height ) : void	Adds a pyramid. See http://en.wikipedia.org/wiki/Pyramid_(geometry).
AddQuad ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, System.Windows.Media.Media3D.Point3D p3 ) : void	Adds a quadrilateral polygon. See http://en.wikipedia.org/wiki/Quadrilateral.
AddQuad ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, System.Windows.Media.Media3D.Point3D p3, Point uv0, Point uv1, Point uv2, Point uv3 ) : void	Adds a quadrilateral polygon. See http://en.wikipedia.org/wiki/Quadrilateral.
AddQuads ( IList quadPositions, IList quadNormals, IList quadTextureCoordinates ) : void	Adds a list of quadrilateral polygons.
AddRectangularMesh ( IList points, int columns ) : void	Adds a rectangular mesh (m x n points).
AddRectangularMesh ( System.Windows.Media.Media3D.Point3D points, Point texCoords = null, bool closed0 = false, bool closed1 = false ) : void	Adds a rectangular mesh defined by a two-dimensional array of points.
AddRegularIcosahedron ( System.Windows.Media.Media3D.Point3D center, double radius, bool shareVertices ) : void	Adds a regular icosahedron. See Wikipedia and link.
AddRevolvedGeometry ( IList points, System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Vector3D direction, int thetaDiv ) : void	Adds a surface of revolution. See http://en.wikipedia.org/wiki/Surface_of_revolution.
AddSphere ( System.Windows.Media.Media3D.Point3D center, double radius, int thetaDiv = 20, int phiDiv = 10 ) : void	Adds a sphere.
AddSubdivisionSphere ( System.Windows.Media.Media3D.Point3D center, double radius, int subdivisions ) : void	Adds a sphere (by subdividing a regular icosahedron). See link.
AddTriangle ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2 ) : void	Adds a triangle.
AddTriangle ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, Point uv0, Point uv1, Point uv2 ) : void	Adds a triangle.
AddTriangleFan ( IList fanPositions, IList fanNormals = null, IList fanTextureCoordinates = null ) : void	Adds a triangle fan to the mesh
AddTriangleFan ( IList vertices ) : void	Adds a triangle fan.
AddTriangleStrip ( IList stripPositions, IList stripNormals = null, IList stripTextureCoordinates = null ) : void	Adds a triangle strip to the mesh. See http://en.wikipedia.org/wiki/Triangle_strip.
AddTriangles ( IList trianglePositions, IList triangleNormals = null, IList triangleTextureCoordinates = null ) : void	Adds a list of triangles.
AddTube ( IList path, IList values, IList diameters, IList section, bool isTubeClosed, bool isSectionClosed ) : void	Adds a tube with a custom section.
AddTube ( IList path, double values, double diameters, int thetaDiv, bool isTubeClosed ) : void	Adds a tube.
AddTube ( IList path, double diameter, int thetaDiv, bool isTubeClosed ) : void	Adds a tube.
Append ( IList positionsToAppend, IList triangleIndicesToAppend, IList normalsToAppend = null, IList textureCoordinatesToAppend = null ) : void	Appends the specified points and triangles.
Append ( MeshBuilder mesh ) : void	Appends the specified mesh.
Append ( System.Windows.Media.Media3D.MeshGeometry3D mesh ) : void	Appends the specified mesh.
ChamferCorner ( System.Windows.Media.Media3D.Point3D p, double d, double eps = 1e-6, IList chamferPoints = null ) : void	Chamfers the specified corner (experimental code).
CheckPerformanceLimits ( ) : void	Checks the performance limits. See MSDN. Try to keep mesh sizes under these limits: Positions : 20,001 point instances TriangleIndices : 60,003 integer instances
GetCircle ( int thetaDiv ) : IList	Gets a circle section (cached).
MeshBuilder ( ) : System	Initializes a new instance of the MeshBuilder class. Normal and texture coordinate generation are included.
MeshBuilder ( bool generateNormals, bool generateTextureCoordinates ) : System	Initializes a new instance of the MeshBuilder class.
Scale ( double scaleX, double scaleY, double scaleZ ) : void	Scales the positions (and normal vectors).
SubdivideLinear ( bool barycentric = false ) : void	Performs a linear subdivision of the mesh.
ToMesh ( bool freeze = false ) : System.Windows.Media.Media3D.MeshGeometry3D	Converts the geometry to a MeshGeometry3D .

비공개 메소드들

메소드	설명
AddRectangularMeshNormals ( int index0, int rows, int columns ) : void	Adds normal vectors for a rectangular mesh.
AddRectangularMeshTextureCoordinates ( int rows, int columns ) : void	Adds texture coordinates for a rectangular mesh.
AddRectangularMeshTriangleIndices ( int index0, int rows, int columns, bool isSpherical = false ) : void	Add triangle indices for a rectangular mesh.
AddRectangularMeshTriangleIndices ( int index0, int rows, int columns, bool rowsClosed, bool columnsClosed ) : void	Adds triangular indices for a rectangular mesh.
FindCornerNormal ( System.Windows.Media.Media3D.Point3D p, double eps ) : System.Windows.Media.Media3D.Vector3D	Finds the average normal to the specified corner (experimental code).
GetUnitSphere ( int subdivisions ) : System.Windows.Media.Media3D.MeshGeometry3D	Gets a unit sphere from the cache.
NoSharedVertices ( ) : void	Makes sure no triangles share the same vertex.
Subdivide4 ( ) : void	Subdivides each triangle into four sub-triangles.
SubdivideBarycentric ( ) : void	Subdivides each triangle into six triangles. Adds a vertex at the midpoint of each triangle. See http://en.wikipedia.org/wiki/Barycentric_subdivision

메소드 상세

AddArrow() 공개 메소드

Adds an arrow to the mesh.

public AddArrow ( System.Windows.Media.Media3D.Point3D point1, System.Windows.Media.Media3D.Point3D point2, double diameter, double headLength = 3, double headDiameter = 2, int thetaDiv = 18 ) : void
point1	System.Windows.Media.Media3D.Point3D	/// The start point. ///
point2	System.Windows.Media.Media3D.Point3D	/// The end point. ///
diameter	double	/// The diameter of the arrow cylinder. ///
headLength	double	/// Length of the head (relative to diameter). ///
headDiameter	double
thetaDiv	int	/// The number of divisions around the arrow. ///
리턴	void

AddBoundingBox() 공개 메소드

Adds the edges of a bounding box as cylinders.

public AddBoundingBox ( System.Windows.Media.Media3D.Rect3D boundingBox, double diameter ) : void
boundingBox	System.Windows.Media.Media3D.Rect3D	/// The bounding box. ///
diameter	double	/// The diameter of the cylinders. ///
리턴	void

AddBox() 공개 메소드

Adds a box aligned with the X, Y and Z axes.

public AddBox ( System.Windows.Media.Media3D.Point3D center, double xlength, double ylength, double zlength ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center point of the box. ///
xlength	double	/// The length of the box along the X axis. ///
ylength	double	/// The length of the box along the Y axis. ///
zlength	double	/// The length of the box along the Z axis. ///
리턴	void

AddBox() 공개 메소드

Adds a box with the specified faces, aligned with the X, Y and Z axes.

public AddBox ( System.Windows.Media.Media3D.Point3D center, double xlength, double ylength, double zlength, BoxFaces faces ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center point of the box. ///
xlength	double	/// The length of the box along the X axis. ///
ylength	double	/// The length of the box along the Y axis. ///
zlength	double	/// The length of the box along the Z axis. ///
faces	BoxFaces	/// The faces to include. ///
리턴	void

AddBox() 공개 메소드

Adds a box aligned with the X, Y and Z axes.

public AddBox ( System.Windows.Media.Media3D.Rect3D rectangle ) : void
rectangle	System.Windows.Media.Media3D.Rect3D	/// The 3-D "rectangle". ///
리턴	void

AddCone() 공개 메소드

Adds a cone.

public AddCone ( System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Point3D apex, double baseRadius, bool baseCap, int thetaDiv ) : void
origin	System.Windows.Media.Media3D.Point3D	The origin point.
apex	System.Windows.Media.Media3D.Point3D	The apex point.
baseRadius	double	The base radius.
baseCap	bool	/// Include a base cap if set to true . ///
thetaDiv	int	The theta div.
리턴	void

AddCone() 공개 메소드

Adds a (possibly truncated) cone.

See http://en.wikipedia.org/wiki/Cone_(geometry).

public AddCone ( System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Vector3D direction, double baseRadius, double topRadius, double height, bool baseCap, bool topCap, int thetaDiv ) : void
origin	System.Windows.Media.Media3D.Point3D	/// The origin. ///
direction	System.Windows.Media.Media3D.Vector3D	/// The direction (normalization not required). ///
baseRadius	double	/// The base radius. ///
topRadius	double	/// The top radius. ///
height	double	/// The height. ///
baseCap	bool	/// Include a base cap if set to true . ///
topCap	bool	/// Include the top cap if set to true . ///
thetaDiv	int	/// The number of divisions around the cone. ///
리턴	void

AddCubeFace() 공개 메소드

Adds a cube face.

public AddCubeFace ( System.Windows.Media.Media3D.Point3D center, System.Windows.Media.Media3D.Vector3D normal, System.Windows.Media.Media3D.Vector3D up, double dist, double width, double height ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center of the cube. ///
normal	System.Windows.Media.Media3D.Vector3D	/// The normal vector for the face. ///
up	System.Windows.Media.Media3D.Vector3D	/// The up vector for the face. ///
dist	double	/// The distance from the center of the cube to the face. ///
width	double	/// The width of the face. ///
height	double	/// The height of the face. ///
리턴	void

AddCylinder() 공개 메소드

Adds a cylinder to the mesh.

See http://en.wikipedia.org/wiki/Cylinder_(geometry).

public AddCylinder ( System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, double diameter, int thetaDiv ) : void
p1	System.Windows.Media.Media3D.Point3D	/// The first point. ///
p2	System.Windows.Media.Media3D.Point3D	/// The second point. ///
diameter	double	/// The diameters. ///
thetaDiv	int	/// The number of divisions around the cylinder. ///
리턴	void

AddEdges() 공개 메소드

Adds a collection of edges as cylinders.

public AddEdges ( IList points, IList edges, double diameter, int thetaDiv ) : void
points	IList	/// The points. ///
edges	IList	/// The edge indices. ///
diameter	double	/// The diameter of the cylinders. ///
thetaDiv	int	/// The number of divisions around the cylinders. ///
리턴	void

AddExtrudedGeometry() 공개 메소드

Adds an extruded surface of the specified curve.

The y-axis is determined by the cross product between the specified x-axis and the p1-p0 vector.

public AddExtrudedGeometry ( IList points, System.Windows.Media.Media3D.Vector3D xaxis, System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1 ) : void
points	IList	/// The 2D points describing the curve to extrude. ///
xaxis	System.Windows.Media.Media3D.Vector3D	/// The x-axis. ///
p0	System.Windows.Media.Media3D.Point3D	/// The start origin of the extruded surface. ///
p1	System.Windows.Media.Media3D.Point3D	/// The end origin of the extruded surface. ///
리턴	void

AddLoftedGeometry() 공개 메소드

Adds a lofted surface.

See http://en.wikipedia.org/wiki/Loft_(3D).

public AddLoftedGeometry ( IList positionsList, IList normalList, IList textureCoordinateList ) : void
positionsList	IList	/// List of lofting sections. ///
normalList	IList	/// The normal list. ///
textureCoordinateList	IList	/// The texture coordinate list. ///
리턴	void

AddNode() 공개 메소드

Adds a single node.

public AddNode ( System.Windows.Media.Media3D.Point3D position, System.Windows.Media.Media3D.Vector3D normal, Point textureCoordinate ) : void
position	System.Windows.Media.Media3D.Point3D	/// The position. ///
normal	System.Windows.Media.Media3D.Vector3D	/// The normal. ///
textureCoordinate	Point	/// The texture coordinate. ///
리턴	void

AddPipe() 공개 메소드

Adds a (possibly hollow) pipe.

public AddPipe ( System.Windows.Media.Media3D.Point3D point1, System.Windows.Media.Media3D.Point3D point2, double innerDiameter, double diameter, int thetaDiv ) : void
point1	System.Windows.Media.Media3D.Point3D	/// The start point. ///
point2	System.Windows.Media.Media3D.Point3D	/// The end point. ///
innerDiameter	double	/// The inner diameter. ///
diameter	double	/// The outer diameter. ///
thetaDiv	int	/// The number of divisions around the pipe. ///
리턴	void

AddPolygon() 공개 메소드

Adds a polygon.

If the number of points is greater than 4, a triangle fan is used.

public AddPolygon ( IList points ) : void
points	IList	/// The points of the polygon. ///
리턴	void

AddPolygon() 공개 메소드

Adds a polygon specified by vertex index (uses a triangle fan).

public AddPolygon ( IList vertexIndices ) : void
vertexIndices	IList	The vertex indices.
리턴	void

AddPolygonByCuttingEars() 공개 메소드

Adds a polygon defined by vertex indices (uses the cutting ears algorithm).

public AddPolygonByCuttingEars ( IList vertexIndices ) : void
vertexIndices	IList	The vertex indices.
리턴	void

AddPyramid() 공개 메소드

Adds a pyramid.

See http://en.wikipedia.org/wiki/Pyramid_(geometry).

public AddPyramid ( System.Windows.Media.Media3D.Point3D center, double sideLength, double height ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center. ///
sideLength	double	/// Length of the sides of the pyramid. ///
height	double	/// The height of the pyramid. ///
리턴	void

AddQuad() 공개 메소드

Adds a quadrilateral polygon.

See http://en.wikipedia.org/wiki/Quadrilateral.

public AddQuad ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, System.Windows.Media.Media3D.Point3D p3 ) : void
p0	System.Windows.Media.Media3D.Point3D	/// The first point. ///
p1	System.Windows.Media.Media3D.Point3D	/// The second point. ///
p2	System.Windows.Media.Media3D.Point3D	/// The third point. ///
p3	System.Windows.Media.Media3D.Point3D	/// The fourth point. ///
리턴	void

AddQuad() 공개 메소드

Adds a quadrilateral polygon.

See http://en.wikipedia.org/wiki/Quadrilateral.

public AddQuad ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, System.Windows.Media.Media3D.Point3D p3, Point uv0, Point uv1, Point uv2, Point uv3 ) : void
p0	System.Windows.Media.Media3D.Point3D	/// The first point. ///
p1	System.Windows.Media.Media3D.Point3D	/// The second point. ///
p2	System.Windows.Media.Media3D.Point3D	/// The third point. ///
p3	System.Windows.Media.Media3D.Point3D	/// The fourth point. ///
uv0	Point	/// The first texture coordinate. ///
uv1	Point	/// The second texture coordinate. ///
uv2	Point	/// The third texture coordinate. ///
uv3	Point	/// The fourth texture coordinate. ///
리턴	void

AddQuads() 공개 메소드

Adds a list of quadrilateral polygons.

public AddQuads ( IList quadPositions, IList quadNormals, IList quadTextureCoordinates ) : void
quadPositions	IList	/// The points. ///
quadNormals	IList	/// The normal vectors. ///
quadTextureCoordinates	IList	/// The texture coordinates. ///
리턴	void

AddRectangularMesh() 공개 메소드

Adds a rectangular mesh (m x n points).

public AddRectangularMesh ( IList points, int columns ) : void
points	IList	/// The one-dimensional array of points. The points are stored row-by-row. ///
columns	int	/// The number of columns in the rectangular mesh. ///
리턴	void

AddRectangularMesh() 공개 메소드

Adds a rectangular mesh defined by a two-dimensional array of points.

public AddRectangularMesh ( System.Windows.Media.Media3D.Point3D points, Point texCoords = null, bool closed0 = false, bool closed1 = false ) : void
points	System.Windows.Media.Media3D.Point3D	/// The points. ///
texCoords	Point	/// The texture coordinates (optional). ///
closed0	bool	/// set to true if the mesh is closed in the first dimension. ///
closed1	bool	/// set to true if the mesh is closed in the second dimension. ///
리턴	void

AddRegularIcosahedron() 공개 메소드

Adds a regular icosahedron.

See Wikipedia and link.

public AddRegularIcosahedron ( System.Windows.Media.Media3D.Point3D center, double radius, bool shareVertices ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center. ///
radius	double	/// The radius. ///
shareVertices	bool	/// Share vertices if set to true . ///
리턴	void

AddRevolvedGeometry() 공개 메소드

Adds a surface of revolution.

See http://en.wikipedia.org/wiki/Surface_of_revolution.

public AddRevolvedGeometry ( IList points, System.Windows.Media.Media3D.Point3D origin, System.Windows.Media.Media3D.Vector3D direction, int thetaDiv ) : void
points	IList	/// The points (x coordinates are radius, y coordinates are distance from the origin along the axis of revolution) ///
origin	System.Windows.Media.Media3D.Point3D	/// The origin of the revolution axis. ///
direction	System.Windows.Media.Media3D.Vector3D	/// The direction of the revolution axis. ///
thetaDiv	int	/// The number of divisions around the mesh. ///
리턴	void

AddSphere() 공개 메소드

Adds a sphere.

public AddSphere ( System.Windows.Media.Media3D.Point3D center, double radius, int thetaDiv = 20, int phiDiv = 10 ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center of the sphere. ///
radius	double	/// The radius of the sphere. ///
thetaDiv	int	/// The number of divisions around the sphere. ///
phiDiv	int	/// The number of divisions from top to bottom of the sphere. ///
리턴	void

AddSubdivisionSphere() 공개 메소드

Adds a sphere (by subdividing a regular icosahedron).

See link.

public AddSubdivisionSphere ( System.Windows.Media.Media3D.Point3D center, double radius, int subdivisions ) : void
center	System.Windows.Media.Media3D.Point3D	/// The center of the sphere. ///
radius	double	/// The radius of the sphere. ///
subdivisions	int	/// The number of triangular subdivisions of the original icosahedron. ///
리턴	void

AddTriangle() 공개 메소드

Adds a triangle.

public AddTriangle ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2 ) : void
p0	System.Windows.Media.Media3D.Point3D	/// The first point. ///
p1	System.Windows.Media.Media3D.Point3D	/// The second point. ///
p2	System.Windows.Media.Media3D.Point3D	/// The third point. ///
리턴	void

AddTriangle() 공개 메소드

Adds a triangle.

public AddTriangle ( System.Windows.Media.Media3D.Point3D p0, System.Windows.Media.Media3D.Point3D p1, System.Windows.Media.Media3D.Point3D p2, Point uv0, Point uv1, Point uv2 ) : void
p0	System.Windows.Media.Media3D.Point3D	/// The first point. ///
p1	System.Windows.Media.Media3D.Point3D	/// The second point. ///
p2	System.Windows.Media.Media3D.Point3D	/// The third point. ///
uv0	Point	/// The first texture coordinate. ///
uv1	Point	/// The second texture coordinate. ///
uv2	Point	/// The third texture coordinate. ///
리턴	void

AddTriangleFan() 공개 메소드

Adds a triangle fan to the mesh

public AddTriangleFan ( IList fanPositions, IList fanNormals = null, IList fanTextureCoordinates = null ) : void
fanPositions	IList	/// The points of the triangle fan. ///
fanNormals	IList	/// The normal vectors of the triangle fan. ///
fanTextureCoordinates	IList	/// The texture coordinates of the triangle fan. ///
리턴	void

AddTriangleFan() 공개 메소드

Adds a triangle fan.

public AddTriangleFan ( IList vertices ) : void
vertices	IList	/// The vertex indices of the triangle fan. ///
리턴	void

AddTriangleStrip() 공개 메소드

Adds a triangle strip to the mesh.

See http://en.wikipedia.org/wiki/Triangle_strip.

public AddTriangleStrip ( IList stripPositions, IList stripNormals = null, IList stripTextureCoordinates = null ) : void
stripPositions	IList	/// The points of the triangle strip. ///
stripNormals	IList	/// The normal vectors of the triangle strip. ///
stripTextureCoordinates	IList	/// The texture coordinates of the triangle strip. ///
리턴	void

AddTriangles() 공개 메소드

Adds a list of triangles.

public AddTriangles ( IList trianglePositions, IList triangleNormals = null, IList triangleTextureCoordinates = null ) : void
trianglePositions	IList	/// The points (the number of points must be a multiple of 3). ///
triangleNormals	IList	/// The normal vectors (corresponding to the points). ///
triangleTextureCoordinates	IList	/// The texture coordinates (corresponding to the points). ///
리턴	void

AddTube() 공개 메소드

Adds a tube with a custom section.

public AddTube ( IList path, IList values, IList diameters, IList section, bool isTubeClosed, bool isSectionClosed ) : void
path	IList	/// A list of points defining the centers of the tube. ///
values	IList	/// The texture coordinate X values (optional). ///
diameters	IList	/// The diameters (optional). ///
section	IList	/// The section to extrude along the tube path. ///
isTubeClosed	bool	/// If the tube is closed set to true . ///
isSectionClosed	bool	/// if set to true [is section closed]. ///
리턴	void

AddTube() 공개 메소드

Adds a tube.

public AddTube ( IList path, double values, double diameters, int thetaDiv, bool isTubeClosed ) : void
path	IList	/// A list of points defining the centers of the tube. ///
values	double	/// The texture coordinate X-values (optional). ///
diameters	double	/// The diameters (optional). ///
thetaDiv	int	/// The number of divisions around the tube. ///
isTubeClosed	bool	/// Set to true if the tube path is closed. ///
리턴	void

AddTube() 공개 메소드

Adds a tube.

public AddTube ( IList path, double diameter, int thetaDiv, bool isTubeClosed ) : void
path	IList	/// A list of points defining the centers of the tube. ///
diameter	double	/// The diameter of the tube. ///
thetaDiv	int	/// The number of divisions around the tube. ///
isTubeClosed	bool	/// Set to true if the tube path is closed. ///
리턴	void

Append() 공개 메소드

Appends the specified points and triangles.

public Append ( IList positionsToAppend, IList triangleIndicesToAppend, IList normalsToAppend = null, IList textureCoordinatesToAppend = null ) : void
positionsToAppend	IList	/// The points to append. ///
triangleIndicesToAppend	IList	/// The triangle indices to append. ///
normalsToAppend	IList	/// The normal vectors to append. ///
textureCoordinatesToAppend	IList	/// The texture coordinates to append. ///
리턴	void

Append() 공개 메소드

Appends the specified mesh.

public Append ( MeshBuilder mesh ) : void
mesh	MeshBuilder	/// The mesh. ///
리턴	void

Append() 공개 메소드

Appends the specified mesh.

public Append ( System.Windows.Media.Media3D.MeshGeometry3D mesh ) : void
mesh	System.Windows.Media.Media3D.MeshGeometry3D	/// The mesh. ///
리턴	void

ChamferCorner() 공개 메소드

Chamfers the specified corner (experimental code).

public ChamferCorner ( System.Windows.Media.Media3D.Point3D p, double d, double eps = 1e-6, IList chamferPoints = null ) : void
p	System.Windows.Media.Media3D.Point3D	/// The corner point. ///
d	double	/// The chamfer distance. ///
eps	double	/// The corner search limit distance. ///
chamferPoints	IList	/// If this parameter is provided, the collection will be filled with the generated chamfer points. ///
리턴	void

CheckPerformanceLimits() 공개 메소드

Checks the performance limits.

See MSDN. Try to keep mesh sizes under these limits: Positions : 20,001 point instances TriangleIndices : 60,003 integer instances

public CheckPerformanceLimits ( ) : void
리턴	void

GetCircle() 공개 정적인 메소드

Gets a circle section (cached).

public static GetCircle ( int thetaDiv ) : IList
thetaDiv	int	/// The number of division. ///
리턴	IList

MeshBuilder() 공개 메소드

Initializes a new instance of the MeshBuilder class.

Normal and texture coordinate generation are included.

public MeshBuilder ( ) : System
리턴	System

MeshBuilder() 공개 메소드

Initializes a new instance of the MeshBuilder class.

public MeshBuilder ( bool generateNormals, bool generateTextureCoordinates ) : System
generateNormals	bool	/// Generate normal vectors. ///
generateTextureCoordinates	bool	/// Generate texture coordinates. ///
리턴	System

Scale() 공개 메소드

Scales the positions (and normal vectors).

public Scale ( double scaleX, double scaleY, double scaleZ ) : void
scaleX	double	/// The X scale factor. ///
scaleY	double	/// The Y scale factor. ///
scaleZ	double	/// The Z scale factor. ///
리턴	void

SubdivideLinear() 공개 메소드

Performs a linear subdivision of the mesh.

public SubdivideLinear ( bool barycentric = false ) : void
barycentric	bool	/// Barycentric(?) if set to true . ///
리턴	void

ToMesh() 공개 메소드

Converts the geometry to a MeshGeometry3D .

public ToMesh ( bool freeze = false ) : System.Windows.Media.Media3D.MeshGeometry3D
freeze	bool	/// freeze the mesh if set to true . ///
리턴	System.Windows.Media.Media3D.MeshGeometry3D