| Name | Description |
|---|---|
| AdditionalRR | |
| AnswerRR | |
| AuthorityRR | |
| Dig | DNS Dig |
| Header | DNS Response Header |
| Question | |
| RR | Resource Record (rfc1034 3.6.) |
| Record | |
| RecordA | |
| RecordA6 | A6 - IPv6 Host Address Not Used |
| RecordAAAA | |
| RecordAFSDB | |
| RecordAPL | APL not-used |
| RecordATMA | ATMA - Asynchronous Transfer Mode Address |
| RecordCERT | Storing Certificates in the Domain Name System (DNS) http://tools.ietf.org/html/rfc4398 |
| RecordCNAME | CNAME RDATA format Alias of one name to another: the DNS lookup will continue by retrying the lookup with the new name. 3.3.1 |
| RecordDHCID | |
| RecordDNAME | |
| RecordDNSKEY | |
| RecordDS | DS - Delegation signer The record used to identify the DNSSEC signing key of a delegated zone http://tools.ietf.org/html/rfc4034 |
| RecordEID | |
| RecordGID | |
| RecordGPOS | GPOS - The geographical location http://tools.ietf.org/rfc/rfc1712.txt |
| RecordHINFO | System Information Record (HINFO) Allows definition of the Hardware type and Operating System (OS) in use at a host. |
| RecordHIP | |
| RecordIPSECKEY | IPSECKEY - IPSEC Key Key record that can be used with IPSEC http://tools.ietf.org/html/rfc4025 |
| RecordISDN | |
| RecordKEY | |
| RecordKX | KX - Key eXchanger record Used with some cryptographic systems (not including DNSSEC) to identify a key management agent for the associated domain-name. Note that this has nothing to do with DNS Security. It is Informational status, rather than being on the IETF standards-track. It has always had limited deployment, but is still in use. http://tools.ietf.org/html/rfc2230 |
| RecordLOC | |
| RecordMB | |
| RecordMD | |
| RecordMF | |
| RecordMG | |
| RecordMINFO | |
| RecordMR | MR (Renamed Mailbox) RDATA format (EXPERIMENTAL) 3.3.8 |
| RecordMX | MX (Mail Exchanger) RDATA format 3.3.9 |
| RecordNAPTR | |
| RecordNIMLOC | The NIMLOC (Nimrod Locator) RR |
| RecordNS | NS (Authoritative Name Server) RDATA format 3.3.11 |
| RecordNSAP | |
| RecordNSAPPTR | |
| RecordNSEC | |
| RecordNSEC3 | |
| RecordNSEC3PARAM | NSEC3PARAM - NSEC3 parameters Parameter record for use with NSEC3 http://tools.ietf.org/html/rfc5155 |
| RecordNULL | |
| RecordNXT | |
| RecordOPT | |
| RecordPTR | PTR (Domain Name Pointer) RDATA format 3.3.12 |
| RecordPX | |
| RecordRP | |
| RecordRRSIG | |
| RecordRT | The Route Through RR |
| RecordReader | |
| RecordSIG | |
| RecordSINK | |
| RecordSOA | |
| RecordSPF | |
| RecordSRV | A DNS RR for specifying the location of services (DNS SRV) http://www.ietf.org/rfc/rfc2782.txt |
| RecordSSHFP | |
| RecordTKEY | Secret Key Establishment for DNS (TKEY RR) http://tools.ietf.org/rfc/rfc2930.txt |
| RecordTSIG | |
| RecordUID | |
| RecordUINFO | |
| RecordUNSPEC | |
| RecordUnknown | |
| RecordWKS | WKS RDATA format The WKS record is used to describe the well known services supported by a particular protocol on a particular internet address. The PROTOCOL field specifies an IP protocol number, and the bit map has one bit per port of the specified protocol. The first bit corresponds to port 0, the second to port 1, etc. If the bit map does not include a bit for a protocol of interest, that bit is assumed zero. The appropriate values and mnemonics for ports and protocols are specified in [RFC-1010]. For example, if PROTOCOL=TCP (6), the 26th bit corresponds to TCP port 25 (SMTP). If this bit is set, a SMTP server should be listening on TCP port 25; if zero, SMTP service is not supported on the specified address. The purpose of WKS RRs is to provide availability information for servers for TCP and UDP. If a server supports both TCP and UDP, or has multiple Internet addresses, then multiple WKS RRs are used. |
| RecordX25 | X25 RR |
| Request | |
| Resolver | Resolver is the main class to do DNS query lookups |
| Resolver.VerboseEventArgs | |
| Resolver.VerboseOutputEventArgs |
