C# Class NetSparkle.Sparkle

Class to communicate with a sparkle-based appcast

Inheritance: IDisposable

显示文件 Open project: Deadpikle/NetSparkle Class Usage Examples

Public Methods

Method	Description
CancelFileDownload ( ) : void	Cancels the install
CheckForUpdatesAtUserRequest ( ) : Task	Check for updates, using interaction appropriate for if the user just said "check for updates".
CheckForUpdatesQuietly ( ) : Task	Check for updates, using interaction appropriate for where the user doesn't know you're doing it, so be polite
CheckOnFirstApplicationIdle ( ) : void	The app will check once, after the app settles down.
Dispose ( ) : void	Is called in the using context and will stop all background activities
GetAbsoluteUrl ( string url ) : Uri	Converts an relative url to an absolute url based on the
GetApplicationConfig ( ) : NetSparkle.NetSparkleConfiguration	This method reads the local sparkle configuration for the given reference assembly
GetUpdateStatus ( NetSparkle.NetSparkleConfiguration config ) : Task	This method checks if an update is required. During this process the appcast will be downloaded and checked against the reference assembly. Ensure that the calling process has read access to the reference assembly. This method is also called from the background loops.
GetWebContentResponse ( string Url ) : WebResponse	TODO
GetWebContentStream ( string Url ) : Stream	TODO
ReportDiagnosticMessage ( string message ) : void	This method reports a message in the diagnostic window
ShowUpdateNeededUI ( NetSparkleAppCastItem updates ) : void	This method shows the update ui and allows to perform the update process
Sparkle ( String appcastUrl ) : System	ctor which needs the appcast url
Sparkle ( String appcastUrl, Icon applicationIcon ) : System	ctor which needs the appcast url
Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode ) : System	ctor which needs the appcast url
Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey ) : System	ctor which needs the appcast url
Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey, String referenceAssembly ) : System	ctor which needs the appcast url and a referenceassembly
Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey, String referenceAssembly, INetSparkleUIFactory factory ) : System	ctor which needs the appcast url and a referenceassembly
StartLoop ( System.Boolean doInitialCheck ) : void	The method starts a NetSparkle background loop If NetSparkle is configured to check for updates on startup, proceeds to perform the check. You should only call this function when your app is initialized and shows its main window.
StartLoop ( System.Boolean doInitialCheck, System.Boolean forceInitialCheck ) : void	The method starts a NetSparkle background loop If NetSparkle is configured to check for updates on startup, proceeds to perform the check. You should only call this function when your app is initialized and shows its main window.
StartLoop ( System.Boolean doInitialCheck, System.Boolean forceInitialCheck, System.TimeSpan checkFrequency ) : void	The method starts a NetSparkle background loop If NetSparkle is configured to check for updates on startup, proceeds to perform the check. You should only call this function when your app is initialized and shows its main window.
StartLoop ( System.Boolean doInitialCheck, System.TimeSpan checkFrequency ) : void	The method starts a NetSparkle background loop If NetSparkle is configured to check for updates on startup, proceeds to perform the check. You should only call this function when your app is initialized and shows its main window.
StopLoop ( ) : void	This method will stop the sparkle background loop and is called through the disposable interface automatically
UpdateSystemProfileInformation ( NetSparkle.NetSparkleConfiguration config ) : void	This method updates the profile information which can be sended to the server if enabled

Protected Methods

Method	Description
GetInstallerCommand ( string downloadFileName ) : string	Return installer runner command. May throw InvalidDataException

Private Methods

Method	Description
AskApplicationToSafelyCloseUp ( ) : Task	Apps may need, for example, to let user save their work
CheckForUpdates ( bool useNotificationToast ) : Task	Does a one-off check for updates
InitDownloadAndInstallProcess ( NetSparkleAppCastItem item ) : void	Starts the download process
OnDownloadFinished ( object sender, AsyncCompletedEventArgs e ) : void	Called when the installer is downloaded
OnFirstApplicationIdle ( object sender, EventArgs e ) : void
OnProgressWindowInstallAndRelaunch ( object sender, EventArgs e ) : void	Called when the progress bar fires the update event
OnToastClick ( NetSparkleAppCastItem updates ) : void
OnUserWindowUserResponded ( object sender, EventArgs e ) : void	Called when the user responds to the "skip, later, install" question.
OnWindowsFormsApplicationExit ( object sender, EventArgs e ) : void	Called when a Windows forms application exits. Starts the installer.
OnWorkerDoWork ( object sender, DoWorkEventArgs e ) : void	This method will be executed as worker thread
OnWorkerProgressChanged ( object sender, ProgressChangedEventArgs e ) : void	This method will be notified
ProfileDataThreadStart ( object obj ) : void	Profile data thread
RemoteCertificateValidation ( object sender, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors ) : bool	Determine if the remote X509 certificate is validate
RunDownloadedInstaller ( ) : System.Threading.Task	Runs the downloaded installer
ShowUpdateNeededUIInner ( NetSparkleAppCastItem updates ) : void
UnregisterEvents ( ) : void	Unregisters events so that we don't have multiple items updating
Update ( NetSparkleAppCastItem updates ) : void	Updates from appcast

Method Details

CancelFileDownload() public method

Cancels the install

public CancelFileDownload ( ) : void
return	void

CheckForUpdatesAtUserRequest() public method

Check for updates, using interaction appropriate for if the user just said "check for updates".

public CheckForUpdatesAtUserRequest ( ) : Task
return	Task

CheckForUpdatesQuietly() public method

Check for updates, using interaction appropriate for where the user doesn't know you're doing it, so be polite

public CheckForUpdatesQuietly ( ) : Task
return	Task

CheckOnFirstApplicationIdle() public method

The app will check once, after the app settles down.

public CheckOnFirstApplicationIdle ( ) : void
return	void

Dispose() public method

Is called in the using context and will stop all background activities

public Dispose ( ) : void
return	void

GetAbsoluteUrl() public method

Converts an relative url to an absolute url based on the

public GetAbsoluteUrl ( string url ) : Uri
url	string	relative or absolute url
return	System.Uri

GetApplicationConfig() public method

This method reads the local sparkle configuration for the given reference assembly

public GetApplicationConfig ( ) : NetSparkle.NetSparkleConfiguration
return	NetSparkle.NetSparkleConfiguration

GetInstallerCommand() protected method

Return installer runner command. May throw InvalidDataException

protected GetInstallerCommand ( string downloadFileName ) : string
downloadFileName	string
return	string

GetUpdateStatus() public method

This method checks if an update is required. During this process the appcast will be downloaded and checked against the reference assembly. Ensure that the calling process has read access to the reference assembly. This method is also called from the background loops.

public GetUpdateStatus ( NetSparkle.NetSparkleConfiguration config ) : Task
config	NetSparkle.NetSparkleConfiguration	the configuration
return	Task

GetWebContentResponse() public method

TODO

public GetWebContentResponse ( string Url ) : WebResponse
Url	string
return	System.Net.WebResponse

GetWebContentStream() public method

TODO

public GetWebContentStream ( string Url ) : Stream
Url	string
return	Stream

ReportDiagnosticMessage() public method

This method reports a message in the diagnostic window

public ReportDiagnosticMessage ( string message ) : void
message	string
return	void

ShowUpdateNeededUI() public method

This method shows the update ui and allows to perform the update process

public ShowUpdateNeededUI ( NetSparkleAppCastItem updates ) : void
updates	NetSparkleAppCastItem	updates to show UI for
return	void

Sparkle() public method

ctor which needs the appcast url

public Sparkle ( String appcastUrl ) : System
appcastUrl	String	the URL for the appcast file
return	System

Sparkle() public method

ctor which needs the appcast url

public Sparkle ( String appcastUrl, Icon applicationIcon ) : System
appcastUrl	String	the URL for the appcast file
applicationIcon	System.Drawing.Icon	If you're invoking this from a form, this would be this.Icon
return	System

Sparkle() public method

ctor which needs the appcast url

public Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode ) : System
appcastUrl	String	the URL for the appcast file
applicationIcon	System.Drawing.Icon	If you're invoking this from a form, this would be this.Icon
securityMode	SecurityMode	Sparkle Security mode
return	System

Sparkle() public method

ctor which needs the appcast url

public Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey ) : System
appcastUrl	String	the URL for the appcast file
applicationIcon	System.Drawing.Icon	If you're invoking this from a form, this would be this.Icon
securityMode	SecurityMode
dsaPublicKey	String	The dsa public key to verfiy the sigatures.
return	System

Sparkle() public method

ctor which needs the appcast url and a referenceassembly

public Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey, String referenceAssembly ) : System
appcastUrl	String	the URL for the appcast file
applicationIcon	System.Drawing.Icon	If you're invoking this from a form, this would be this.Icon
securityMode	SecurityMode
dsaPublicKey	String
referenceAssembly	String	the name of the assembly to use for comparison
return	System

Sparkle() public method

ctor which needs the appcast url and a referenceassembly

public Sparkle ( String appcastUrl, Icon applicationIcon, SecurityMode securityMode, String dsaPublicKey, String referenceAssembly, INetSparkleUIFactory factory ) : System
appcastUrl	String	the URL for the appcast file
applicationIcon	System.Drawing.Icon	If you're invoking this from a form, this would be this.Icon
securityMode	SecurityMode
dsaPublicKey	String
referenceAssembly	String	the name of the assembly to use for comparison
factory	INetSparkleUIFactory	UI factory to use
return	System

StartLoop() public method

The method starts a NetSparkle background loop If NetSparkle is configured to check for updates on startup, proceeds to perform the check. You should only call this function when your app is initialized and shows its main window.

public StartLoop ( System.Boolean doInitialCheck ) : void
doInitialCheck	System.Boolean
return	void

StartLoop() public method

public StartLoop ( System.Boolean doInitialCheck, System.Boolean forceInitialCheck ) : void
doInitialCheck	System.Boolean	true if this instance should do an initial check.
forceInitialCheck	System.Boolean	true if this instance should force an initial check.
return	void

StartLoop() public method

public StartLoop ( System.Boolean doInitialCheck, System.Boolean forceInitialCheck, System.TimeSpan checkFrequency ) : void
doInitialCheck	System.Boolean	true if this instance should do an initial check.
forceInitialCheck	System.Boolean	true if this instance should force an initial check.
checkFrequency	System.TimeSpan	the frequency between checks.
return	void

StartLoop() public method

public StartLoop ( System.Boolean doInitialCheck, System.TimeSpan checkFrequency ) : void
doInitialCheck	System.Boolean	true if this instance should do an initial check.
checkFrequency	System.TimeSpan	the frequency between checks.
return	void

StopLoop() public method

This method will stop the sparkle background loop and is called through the disposable interface automatically

public StopLoop ( ) : void
return	void

UpdateSystemProfileInformation() public method

This method updates the profile information which can be sended to the server if enabled

public UpdateSystemProfileInformation ( NetSparkle.NetSparkleConfiguration config ) : void
config	NetSparkle.NetSparkleConfiguration	the configuration
return	void