C# Class HouseOfTheFuture.RF24Library.NRF24L01Plus

显示文件 Open project: HouseOfTheFuture/IoT-Device

Public Methods

Method	Description
Configure ( byte address, byte channel ) : void	Configure the module basic settings. Module needs to be initiaized.
Configure ( byte address, byte channel, NRFDataRate dataRate ) : void	Configure the module basic settings. Module needs to be initiaized.
Disable ( ) : void	Disables the module
Enable ( ) : void	Enables the module
Execute ( byte command, byte addres, byte data ) : byte[]	Executes a command in NRF24L01+ (for details see module datasheet)
GetAddress ( AddressSlot slot, int width ) : byte[]	Read 1 of 6 available module addresses
GetChannel ( ) : byte	Reads the current rf channel value set in module
GetFrequency ( ) : int	Gets the module radio frequency [MHz]
GetStatus ( ) : Status	Gets module basic status information
HandleInterrupt ( uint data1, uint data2, System.DateTime dateTime ) : void
Initialize ( SpiMode spiMode, int chipSelectPin, int chipEnablePin, int interruptPin ) : void	Initializes SPI connection and control pins
NRF24L01Plus ( ) : System
SendTo ( byte address, byte bytes, int timeout ) : bool	Sends bytes to given address This is a blocking method that returns true if data was received by the recipient or false if timeout occured.
SendTo ( byte address, byte bytes, Acknowledge acknowledge = Acknowledge.Yes ) : void	Send bytes to given address This is a non blocking method.
SetAddress ( AddressSlot slot, byte address ) : void	Set one of 6 available module addresses
SetChannel ( byte channel ) : void	Sets the rf channel value used by all data pipes

Private Methods

Method	Description
CheckIsInitialized ( ) : void
InitSpi ( int chipSelectPin, SpiMode mode ) : Task
SetDisabled ( ) : void
SetEnabled ( ) : void
SetReceiveMode ( ) : void
SetTransmitMode ( ) : void
_irqPin_ValueChanged ( Windows.Devices.Gpio.GpioPin sender, Windows.Devices.Gpio.GpioPinValueChangedEventArgs args ) : void

Method Details

Configure() public method

Configure the module basic settings. Module needs to be initiaized.

public Configure ( byte address, byte channel ) : void
address	byte	RF address (3-5 bytes). The width of this address determins the width of all addresses used for sending/receiving.
channel	byte	RF channel (0-127)
return	void

Configure() public method

Configure the module basic settings. Module needs to be initiaized.

public Configure ( byte address, byte channel, NRFDataRate dataRate ) : void
address	byte	RF address (3-5 bytes). The width of this address determins the width of all addresses used for sending/receiving.
channel	byte	RF channel (0-127)
dataRate	NRFDataRate	Data Rate to use
return	void

Disable() public method

Disables the module

public Disable ( ) : void
return	void

Enable() public method

Enables the module

public Enable ( ) : void
return	void

Execute() public method

Executes a command in NRF24L01+ (for details see module datasheet)

public Execute ( byte command, byte addres, byte data ) : byte[]
command	byte	Command
addres	byte	Register to write to
data	byte	Data to write
return	byte[]

GetAddress() public method

Read 1 of 6 available module addresses

public GetAddress ( AddressSlot slot, int width ) : byte[]
slot	AddressSlot
width	int
return	byte[]

GetChannel() public method

Reads the current rf channel value set in module

public GetChannel ( ) : byte
return	byte

GetFrequency() public method

Gets the module radio frequency [MHz]

public GetFrequency ( ) : int
return	int

GetStatus() public method

Gets module basic status information

public GetStatus ( ) : Status
return	Status

HandleInterrupt() public method

public HandleInterrupt ( uint data1, uint data2, System.DateTime dateTime ) : void
data1	uint
data2	uint
dateTime	System.DateTime
return	void

Initialize() public method

Initializes SPI connection and control pins

public Initialize ( SpiMode spiMode, int chipSelectPin, int chipEnablePin, int interruptPin ) : void
spiMode	SpiMode
chipSelectPin	int
chipEnablePin	int
interruptPin	int
return	void

NRF24L01Plus() public method

public NRF24L01Plus ( ) : System
return	System

SendTo() public method

Sends bytes to given address This is a blocking method that returns true if data was received by the recipient or false if timeout occured.

public SendTo ( byte address, byte bytes, int timeout ) : bool
address	byte
bytes	byte
timeout	int
return	bool

SendTo() public method

Send bytes to given address This is a non blocking method.

public SendTo ( byte address, byte bytes, Acknowledge acknowledge = Acknowledge.Yes ) : void
address	byte
bytes	byte
acknowledge	Acknowledge
return	void

SetAddress() public method

Set one of 6 available module addresses

public SetAddress ( AddressSlot slot, byte address ) : void
slot	AddressSlot
address	byte
return	void

SetChannel() public method

Sets the rf channel value used by all data pipes

public SetChannel ( byte channel ) : void
channel	byte	7 bit channel value
return	void