C# Класс PowerStudio.DebugEngine.DebugProcess

Наследование: IDebugProcess2, IDebugProcess3
Показать файл Открыть проект

Открытые методы

Метод Описание
Attach ( IDebugEventCallback2 pCallback, System.Guid rgguidSpecificEngines, uint celtSpecificEngines, int rghrEngineAttach ) : int

Attaches the session debug manager (SDM) to the process.

Attaching to a process attaches the SDM to all programs running in that process that can be debugged by the debug engines (DE) specified in the rgguidSpecificEngines array. Set the rgguidSpecificEngines parameter to a null value or include GUID_NULL in the array to attach to all programs in the process. All debug events that occur in the process are sent to the given IDebugEventCallback2 object. This IDebugEventCallback2 object is provided when the SDM calls this method.

CanDetach ( ) : int

Determines if the session debug manager (SDM) can detach the process.
CauseBreak ( ) : int

Requests that the next program that is running code in this process halt and send an IDebugBreakEvent2 event object.
Continue ( IDebugThread2 pThread ) : int

Continues running this process from a stopped state. Any previous execution state (such as a step) is preserved, and the process starts executing again. ** This method should be used instead of IDebugProgram2::Continue.

This method is called on this process regardless of how many processes are being debugged, or which process generated the stopping event. The implementation must retain the previous execution state (such as a step) and continue execution as though it had never stopped before completing its prior execution. That is, if a thread in this process was doing a step-over operation and was stopped because some other process stopped, and then Continue was called, the specified thread must complete the original step-over operation. Warning Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.

Detach ( ) : int

Detaches the debugger from this process by detaching all of the programs in the process.

All programs and the process continue running, but are no longer part of the debug session. After the detach operation is complete, no more debug events for this process (and its programs) will be sent.

DisableENC ( EncUnavailableReason reason ) : int

This method explicitly disables Edit and Continue on this process (and all programs it contains). A custom port supplier should always return E_NOTIMPL.

A custom port supplier should always return E_NOTIMPL. Once Edit and Continue is disabled for a process, it can be re-enabled only by restarting the process.

EnumPrograms ( IEnumDebugPrograms2 &ppEnum ) : int

Retrieves a list of all the programs contained by this process.
EnumThreads ( IEnumDebugThreads2 &ppEnum ) : int

Retrieves a list of all the threads running in the process.

This method enumerates the threads running in each program and then combines them into a process view of the threads. A single thread may run in multiple programs; this method enumerates that thread only once. This method presents a list of the process's threads without duplicates. Otherwise, to enumerate the threads running in a particular program, use the IDebugProgram2::EnumThreads method.

Execute ( IDebugThread2 pThread ) : int

Continues running this process from a stopped state. Any previous execution state (such as a step) is cleared and the process starts executing again. ** This method should be used instead of IDebugProgram2::Execute.

When the user starts execution from a stopped state in some other process's thread, this method is called on this process. This method is also called when the user selects the Start command from the Debug menu in the IDE. The implementation of this method may be as simple as calling the IDebugThread2::Resume method on the current thread in the process. Warning: Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.

GetDebugReason ( enum_DEBUG_REASON pReason ) : int

This method returns the reason that the process was launched for debugging.
GetENCAvailableState ( EncUnavailableReason pReason ) : int

This method gets the current Edit and Continue state of the process. A custom port supplier should always return E_NOTIMPL.

A custom port supplier should always return E_NOTIMPL. This state can be affected by IDebugProcess3::DisableENC.

GetEngineFilter ( GUID_ARRAY pEngineArray ) : int

Retrieves an array of unique identifiers for available debug engines.
GetHostingProcessLanguage ( System.Guid &pguidLang ) : int

This method returns a GUID representing the language of this process as set by a call to IDebugProcess3::SetHostingProcessLanguage.
GetInfo ( enum_PROCESS_INFO_FIELDS Fields, PROCESS_INFO pProcessInfo ) : int

Gets a description of the process.
GetName ( enum_GETNAME_TYPE gnType, string &pbstrName ) : int

Gets the title, friendly name, or file name of the process.
GetPhysicalProcessId ( AD_PROCESS_ID pProcessId ) : int

Gets the system process identifier.
GetPort ( IDebugPort2 &ppPort ) : int

Gets the port that the process is running on.
GetProcessId ( System.Guid &pguidProcessId ) : int

Gets the GUID for this process.

The Globally Unique IDentifier (GUID) identifies this process from all other processes running in the system.

GetServer ( IDebugCoreServer2 &ppServer ) : int

Gets the server that this process is running on.

More than one server can be running on a single machine.

SetHostingProcessLanguage ( System.Guid &guidLang ) : int

This method sets the language that the process will be hosted under. This language can then be used by the debug engine (DE) to load the appropriate expression evaluator.

IDebugProcess3::GetHostingProcessLanguage can be used to retrieve the current language setting.

Step ( IDebugThread2 pThread, enum_STEPKIND sk, enum_STEPUNIT Step ) : int

Causes the process to step one instruction or statement. ** This method should be used instead of IDebugProgram2::Step.

In case there is any thread synchronization or communication between threads, other threads in the process should run when a particular thread is stepping. Warning Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.

Terminate ( ) : int

Terminates the process.

When a process is terminated, all programs within that process are terminated; none are allowed to run any more code.

Приватные методы

Метод Описание
GetAttachedSessionName ( string &pbstrSessionName ) : int

Описание методов

Attach() публичный Метод

Attaches the session debug manager (SDM) to the process.
Attaching to a process attaches the SDM to all programs running in that process that can be debugged by the debug engines (DE) specified in the rgguidSpecificEngines array. Set the rgguidSpecificEngines parameter to a null value or include GUID_NULL in the array to attach to all programs in the process. All debug events that occur in the process are sent to the given IDebugEventCallback2 object. This IDebugEventCallback2 object is provided when the SDM calls this method.
public Attach ( IDebugEventCallback2 pCallback, System.Guid rgguidSpecificEngines, uint celtSpecificEngines, int rghrEngineAttach ) : int
pCallback IDebugEventCallback2 An IDebugEventCallback2 object that is used for debug event notification.
rgguidSpecificEngines System.Guid An array of GUIDs of debug engines to be used to debug programs running in the process. This parameter can be a null value. See Remarks for details.
celtSpecificEngines uint The number of debug engines in the rgguidSpecificEngines array and the size of the rghrEngineAttach array.
rghrEngineAttach int An array of HRESULT codes returned by the debug engines. The size of this array is specified in the celtSpecificEngines parameter. Each code is typically either S_OK or S_ATTACH_DEFERRED. The latter indicates that the DE is currently attached to no programs.
Результат int

CanDetach() публичный Метод

Determines if the session debug manager (SDM) can detach the process.
public CanDetach ( ) : int
Результат int

CauseBreak() публичный Метод

Requests that the next program that is running code in this process halt and send an IDebugBreakEvent2 event object.
public CauseBreak ( ) : int
Результат int

Continue() публичный Метод

Continues running this process from a stopped state. Any previous execution state (such as a step) is preserved, and the process starts executing again. ** This method should be used instead of IDebugProgram2::Continue.
This method is called on this process regardless of how many processes are being debugged, or which process generated the stopping event. The implementation must retain the previous execution state (such as a step) and continue execution as though it had never stopped before completing its prior execution. That is, if a thread in this process was doing a step-over operation and was stopped because some other process stopped, and then Continue was called, the specified thread must complete the original step-over operation. Warning Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.
public Continue ( IDebugThread2 pThread ) : int
pThread IDebugThread2 An IDebugThread2 object representing the thread to be continued.
Результат int

Detach() публичный Метод

Detaches the debugger from this process by detaching all of the programs in the process.
All programs and the process continue running, but are no longer part of the debug session. After the detach operation is complete, no more debug events for this process (and its programs) will be sent.
public Detach ( ) : int
Результат int

DisableENC() публичный Метод

This method explicitly disables Edit and Continue on this process (and all programs it contains). A custom port supplier should always return E_NOTIMPL.
A custom port supplier should always return E_NOTIMPL. Once Edit and Continue is disabled for a process, it can be re-enabled only by restarting the process.
public DisableENC ( EncUnavailableReason reason ) : int
reason EncUnavailableReason A value from the EncUnavailableReason enumeration.
Результат int

EnumPrograms() публичный Метод

Retrieves a list of all the programs contained by this process.
public EnumPrograms ( IEnumDebugPrograms2 &ppEnum ) : int
ppEnum IEnumDebugPrograms2 Returns an IEnumDebugPrograms2 object that contains a list of all the programs in the process.
Результат int

EnumThreads() публичный Метод

Retrieves a list of all the threads running in the process.
This method enumerates the threads running in each program and then combines them into a process view of the threads. A single thread may run in multiple programs; this method enumerates that thread only once. This method presents a list of the process's threads without duplicates. Otherwise, to enumerate the threads running in a particular program, use the IDebugProgram2::EnumThreads method.
public EnumThreads ( IEnumDebugThreads2 &ppEnum ) : int
ppEnum IEnumDebugThreads2 Returns an IEnumDebugThreads2 object that contains a list of all threads in all programs in the process.
Результат int

Execute() публичный Метод

Continues running this process from a stopped state. Any previous execution state (such as a step) is cleared and the process starts executing again. ** This method should be used instead of IDebugProgram2::Execute.
When the user starts execution from a stopped state in some other process's thread, this method is called on this process. This method is also called when the user selects the Start command from the Debug menu in the IDE. The implementation of this method may be as simple as calling the IDebugThread2::Resume method on the current thread in the process. Warning: Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.
public Execute ( IDebugThread2 pThread ) : int
pThread IDebugThread2 An IDebugThread2 object representing the thread to execute.
Результат int

GetDebugReason() публичный Метод

This method returns the reason that the process was launched for debugging.
public GetDebugReason ( enum_DEBUG_REASON pReason ) : int
pReason enum_DEBUG_REASON Returns a value from the DEBUG_REASON enumeration.
Результат int

GetENCAvailableState() публичный Метод

This method gets the current Edit and Continue state of the process. A custom port supplier should always return E_NOTIMPL.
A custom port supplier should always return E_NOTIMPL. This state can be affected by IDebugProcess3::DisableENC.
public GetENCAvailableState ( EncUnavailableReason pReason ) : int
pReason EncUnavailableReason A value from the EncUnavailableReason enumeration.
Результат int

GetEngineFilter() публичный Метод

Retrieves an array of unique identifiers for available debug engines.
public GetEngineFilter ( GUID_ARRAY pEngineArray ) : int
pEngineArray GUID_ARRAY Reference to a structure that contains unique identifiers for debug engines.
Результат int

GetHostingProcessLanguage() публичный Метод

This method returns a GUID representing the language of this process as set by a call to IDebugProcess3::SetHostingProcessLanguage.
public GetHostingProcessLanguage ( System.Guid &pguidLang ) : int
pguidLang System.Guid The GUID of the language of this process. GUID_NULL (C++) or Guid.Empty (C#) means that the language is not set.
Результат int

GetInfo() публичный Метод

Gets a description of the process.
public GetInfo ( enum_PROCESS_INFO_FIELDS Fields, PROCESS_INFO pProcessInfo ) : int
Fields enum_PROCESS_INFO_FIELDS A combination of values from the PROCESS_INFO_FIELDS enumeration that specifies which fields of the pProcessInfo parameter are to be filled in.
pProcessInfo PROCESS_INFO A PROCESS_INFO structure that is filled in with a description of the process.
Результат int

GetName() публичный Метод

Gets the title, friendly name, or file name of the process.
public GetName ( enum_GETNAME_TYPE gnType, string &pbstrName ) : int
gnType enum_GETNAME_TYPE A value from the GETNAME_TYPE enumeration that specifies what type of name to return.
pbstrName string Returns the name of the process.
Результат int

GetPhysicalProcessId() публичный Метод

Gets the system process identifier.
public GetPhysicalProcessId ( AD_PROCESS_ID pProcessId ) : int
pProcessId AD_PROCESS_ID
Результат int

GetPort() публичный Метод

Gets the port that the process is running on.
public GetPort ( IDebugPort2 &ppPort ) : int
ppPort IDebugPort2 Returns an IDebugPort2 object that represents the port on which the process was launched.
Результат int

GetProcessId() публичный Метод

Gets the GUID for this process.
The Globally Unique IDentifier (GUID) identifies this process from all other processes running in the system.
public GetProcessId ( System.Guid &pguidProcessId ) : int
pguidProcessId System.Guid Returns the GUID for this process.
Результат int

GetServer() публичный Метод

Gets the server that this process is running on.
More than one server can be running on a single machine.
public GetServer ( IDebugCoreServer2 &ppServer ) : int
ppServer IDebugCoreServer2 Returns an IDebugCoreServer2 object that represents the server on which this process is running.
Результат int

SetHostingProcessLanguage() публичный Метод

This method sets the language that the process will be hosted under. This language can then be used by the debug engine (DE) to load the appropriate expression evaluator.
IDebugProcess3::GetHostingProcessLanguage can be used to retrieve the current language setting.
public SetHostingProcessLanguage ( System.Guid &guidLang ) : int
guidLang System.Guid GUID of the language that the DE should use. Specify GUID_NULL (C++) or Guid.Empty (C#) to have the DE use the default language.
Результат int

Step() публичный Метод

Causes the process to step one instruction or statement. ** This method should be used instead of IDebugProgram2::Step.
In case there is any thread synchronization or communication between threads, other threads in the process should run when a particular thread is stepping. Warning Do not send a stopping event or an immediate (synchronous) event to IDebugEventCallback2::Event while handling this call; otherwise the debugger might stop responding.
public Step ( IDebugThread2 pThread, enum_STEPKIND sk, enum_STEPUNIT Step ) : int
pThread IDebugThread2 An IDebugThread2 object representing the thread being stepped.
sk enum_STEPKIND One of the STEPKIND values.
Step enum_STEPUNIT One of the STEPUNIT values.
Результат int

Terminate() публичный Метод

Terminates the process.
When a process is terminated, all programs within that process are terminated; none are allowed to run any more code.
public Terminate ( ) : int
Результат int