C# Класс Microsoft.VisualStudio.Project.ProjectNode

Наследование: HierarchyNode, IVsGetCfgProvider, IVsProject3, IVsAggregatableProject, IVsProjectFlavorCfgProvider, IPersistFileFormat, IVsProjectBuildSystem, IVsBuildPropertyStorage, IVsComponentUser, IVsDependencyProvider, IVsSccProject2, IBuildDependencyUpdate, IProjectEventsListener, IProjectEventsProvider, IReferenceContainerProvider, IVsProjectSpecialFiles

Показать файл Открыть проект Примеры использования класса

Private Properties

Свойство	Тип	Описание
AddCATIDMapping	void
AddDependentFileNodeToNode	HierarchyNode
AddFileNodeToNode	HierarchyNode
AddFileToMsBuild	ProjectElement
AddFolderToMsBuild	ProjectElement
AddIndependentFileNode	HierarchyNode
AddItemWithSpecific	int
Build	MSBuildResult
BuildAsync	void
BuildPrelude	bool
ClonePropertyGroup	Microsoft.Build.Construction.ProjectPropertyGroupElement
CloseAllNodes	void
CreateMsBuildFileItem	ProjectElement
EndBuild	void
GetAssemblyName	string
GetBaseDirectoryForAddingFiles	string
GetBoolAttr	bool
GetBoolAttr	bool
GetCATIDForType	Guid
GetComponentPickerDirectories	string
GetConfigByCanonicalName	ProjectConfig
GetItemParentNode	HierarchyNode
GetMsBuildProperty	Microsoft.Build.Execution.ProjectPropertyInstance
GetNestedProjectForHierarchy	NestedProjectNode
GetOutputPath	string
GetProjectExtensions	Microsoft.Build.Construction.ProjectExtensionsElement
GetProjectOptions	ProjectOptions
GetWizardCustomParams	Array
IPersistFileFormat	int
IVsBuildPropertyStorage	int
IVsBuildPropertyStorage	int
IVsBuildPropertyStorage	int
IVsProjectFlavorCfgProvider	int
InitSccInfo	void
Initialize	void
InvokeMsBuild	MSBuildResult
IsFrameworkOnMachine	bool
Load	void
OnAfterProjectOpen	void
OnHandleConfigurationRelatedGlobalProperties	void
PerformTargetFrameworkCheck	bool
PersistXMLFragments	void
QueryEditProjectFile	bool
RegisterSccProject	void
RunWizard	VSADDRESULT
SetBuildProject	void
SetProjectExtensions	void
SetProjectGuidFromProjectFile	void
SetSccSettings	bool
SetupProjectGlobalPropertiesThatAllProjectSystemsMustSet	void
ShowRetargetingDialog	bool
TryBeginBuild	bool
UnRegisterProject	void
VerifySubFolderExists	FolderNode
WrapXmlFragment	XmlElement

Открытые методы

Метод	Описание
AddBuildDependency ( IVsBuildDependency dependency ) : void
AddComponent ( VSADDCOMPOPERATION dwAddCompOperation, uint cComponents, System rgpcsdComponents, System hwndDialog, VSADDCOMPRESULT pResult ) : int	Add Components to the Project. Used by the environment to add components specified by the user in the Component Selector dialog to the specified project
AddFileFromTemplate ( string source, string target ) : void	Called to add a file to the project from a template. Override to do it yourself if you want to customize the file
AddItem ( uint itemIdLoc, VSADDITEMOPERATION op, string itemName, uint filesToOpen, string files, IntPtr dlgOwner, VSADDRESULT result ) : int
AddProjectReference ( ) : int	Override this method if you want to modify the behavior of the Add Reference dialog By example you could change which pages are visible and which is visible by default.
Build ( string target ) : MSBuildResult	Overloaded method. Invokes MSBuild using the default configuration and does without logging on the output window pane.
Build ( string target, IVsOutputWindowPane output ) : MSBuildResult	Overloaded method. Invokes MSBuild using the default configuration.
Build ( string config, IVsOutputWindowPane output, string target ) : MSBuildResult	Overloaded method to invoke MSBuild
Build ( string config, string target ) : MSBuildResult	Overloaded method to invoke MSBuild. Does not log build results to the output window pane.
BuildTarget ( string targetName, bool &success ) : int
CallMSBuild ( string target ) : MSBuildResult	Calls MSBuild if it is not suspended. Does not log and uses current configuration. If it is suspended then it will remeber to call when msbuild is resumed.
CallMSBuild ( string target, IVsOutputWindowPane output ) : MSBuildResult	Calls MSBuild if it is not suspended. Uses current configuration. If it is suspended then it will remeber to call when msbuild is resumed.
CallMSBuild ( string config, IVsOutputWindowPane output, string target ) : MSBuildResult	Calls MSBuild if it is not suspended. If it is suspended then it will remember to call when msbuild is resumed.
CallMSBuild ( string config, string target ) : MSBuildResult	Overloaded method. Calls MSBuild if it is not suspended. Does not log on the outputwindow. If it is suspended then it will remeber to call when msbuild is resumed.
CancelBatchEdit ( ) : int
Close ( ) : int	Closes the project node.
CreateFileNode ( ProjectElement item ) : FileNode	Create a file node based on an msbuild item.
CreateFileNode ( string file ) : FileNode	Create a file node based on a string.
CreateFolderNodes ( string path ) : HierarchyNode	Walks the subpaths of a project relative path and checks if the folder nodes hierarchy is already there, if not creates it.
CreateProjectOptions ( ) : ProjectOptions	Override this method if you have your own project specific subclass of ProjectOptions
EndBatchEdit ( ) : int
EnumDependencies ( IVsEnumDependencies &enumDependencies ) : int
GenerateUniqueItemName ( uint itemIdLoc, string ext, string suggestedRoot, string &itemName ) : int	for now used by add folder. Called on the ROOT, as only the project should need to implement this. for folders, called with parent folder, blank extension and blank suggested root
GetAggregateProjectTypeGuids ( string &projectTypeGuids ) : int	Retrieve the list of project GUIDs that are aggregated together to make this project.
GetAssemblyName ( string config ) : string	Get the assembly name for a give configuration
GetAutomationObject ( ) : object	Gets the automation object for the project node.
GetBuildSystemKind ( uint &kind ) : int	Used to determine the kind of build system, in VS 2005 there's only one defined kind: MSBuild
GetCfgProvider ( IVsCfgProvider &p ) : int
GetClassID ( Guid &clsid ) : int
GetCompiler ( ) : ICodeCompiler	Returns the Compiler associated to the project
GetCurFile ( string &name, uint &formatIndex ) : int
GetFile ( int fileId, uint flags, uint &itemid, string &fileName ) : int	Allows you to query the project for special files and optionally create them.
GetFormatList ( string &formatlist ) : int
GetGuidProperty ( int propid, Guid &guid ) : int	Gets the GUID value of the node.
GetInner ( ) : HierarchyNode	Get the inner object of an aggregated hierarchy
GetItemContext ( uint itemId, Microsoft &psp ) : int
GetMkDocument ( uint itemId, string &mkDoc ) : int	Callback from the additem dialog. Deals with adding new and existing items
GetMkDocument ( ) : string	Gets the moniker for the project node. That is the full path of the project file.
GetOutputAssembly ( string config ) : string	Get output assembly for a specific configuration name
GetOutputPath ( string config ) : string	Get the output path for a specific configuration name
GetProjectElement ( Microsoft.Build.Evaluation item ) : ProjectElement	This method returns new project element based on existing MSBuild item. It does not modify/add project/build hierarchy at all.
GetProjectProperty ( string propertyName ) : string	Get value of Project property
GetProjectProperty ( string propertyName, bool resetCache ) : string	Return the value of a project property
GetProjectPropertyUnevaluated ( string propertyName ) : string	Gets the unevaluated value of a project property.
GetProperty ( int propId ) : object	Gets the properties of the project node.
GetReferenceContainer ( ) : IReferenceContainer	Returns the reference container node.
GetSccFiles ( uint itemid, CALPOLESTR stringsOut, CADWORD flagsOut ) : int	This method is called to determine which files should be placed under source control for a given VSITEMID within this hierarchy.
GetSccSpecialFiles ( uint itemid, string sccFile, CALPOLESTR stringsOut, CADWORD flagsOut ) : int	This method is called to discover special (hidden files) associated with a given VSITEMID within this hierarchy. This method is called to discover any special or hidden files associated with an item in the project hierarchy. It is called when GetSccFiles returns with the SFF_HasSpecialFiles flag set for any of the files associated with the node.
GetTargetFramework ( string &ppTargetFramework ) : int
InitNew ( uint formatIndex ) : int
InitializeForOuter ( string filename, string location, string name, uint flags, Guid &iid, IntPtr &projectPointer, int &canceled ) : int	This is where the initialization occurs.
IsCodeFile ( string fileName ) : bool	Determines whether a file is a code file.
IsDirty ( int &isDirty ) : int
IsDocumentInProject ( string mkDoc, int &found, VSDOCUMENTPRIORITY pri, uint &itemId ) : int
IsEmbeddedResource ( string fileName ) : bool	Determines whether the given file is a resource file (resx file).
Load ( string fileName, uint mode, int readOnly ) : int
NodeFromItemId ( uint itemId ) : HierarchyNode	Get Node from ItemID.
NodeHasDesigner ( string itemPath ) : bool	Defines if Node has Designer. By default we do not support designers for nodes
OnAggregationComplete ( ) : int	This is called after the project is done initializing the different layer of the aggregations
OnOpenItem ( string fullPathToSourceFile ) : void	Called when the project opens an editor window for the given file
OnTargetFrameworkMonikerChanged ( ProjectOptions options, FrameworkName currentTargetFramework, FrameworkName newTargetFramework ) : void
OpenDependency ( string szDependencyCanonicalName, IVsDependency &dependency ) : int
OpenItem ( uint itemId, Guid &logicalView, IntPtr punkDocDataExisting, IVsWindowFrame &frame ) : int
OpenItemWithSpecific ( uint itemId, uint editorFlags, Guid &editorType, string physicalView, Guid &logicalView, IntPtr docDataExisting, IVsWindowFrame &frame ) : int
PrepareBuild ( string config, bool cleanBuild ) : void	This is called from the main thread before the background build starts. cleanBuild is not part of the vsopts, but passed down as the callpath is differently PrepareBuild mainly creates directories and cleans house if cleanBuild is true
Remove ( bool removeFromStorage ) : void	Removes items from the hierarchy.
RemoveBuildDependency ( IVsBuildDependency dependency ) : void
RemoveItem ( uint reserved, uint itemId, int &result ) : int
ReopenItem ( uint itemId, Guid &editorType, string physicalView, Guid &logicalView, IntPtr docDataExisting, IVsWindowFrame &frame ) : int
ResolveAssemblyPathInTargetFx ( string prgAssemblySpecs, uint cAssembliesToResolve, VsResolvedAssemblyPath prgResolvedAssemblyPaths, uint &pcResolvedAssemblyPaths ) : int
ResumeMSBuild ( string target ) : void	Resumes MSBuild.
ResumeMSBuild ( string config, IVsOutputWindowPane output, string target ) : void	Resumes MSBuild.
ResumeMSBuild ( string config, string target ) : void	Resumes MSBuild.
Save ( string fileToBeSaved, int remember, uint formatIndex ) : int
SaveCompleted ( string filename ) : int
SccGlyphChanged ( int affectedNodes, uint itemidAffectedNodes, VsStateIcon newGlyphs, uint newSccStatus ) : int	This method is called by the source control portion of the environment to inform the project of changes to the source control glyph on various nodes.
SetAggregateProjectTypeGuids ( string projectTypeGuids ) : int	Set the list of GUIDs that are aggregated together to create this project.
SetEditLabel ( string label ) : int	Renames the project node.
SetGuidProperty ( int propid, Guid &guid ) : int	Sets Guid properties for the project node.
SetHostObject ( string targetName, string taskName, object hostObject ) : int
SetInnerProject ( object innerProject ) : int	We are always the inner most part of the aggregation and as such we don't support setting an inner project
SetProjectFileDirty ( bool value ) : void	Set dirty state of project
SetProjectProperty ( string propertyName, string propertyValue ) : void	Set value of project property
SetProperty ( int propid, object value ) : int	Sets the properties for the project node.
SetSccLocation ( string sccProjectName, string sccAuxPath, string sccLocalPath, string sccProvider ) : int	This method is called by the source control portion of the environment when a project is initially added to source control, or to change some of the project's settings.
SetSite ( Microsoft site ) : int	Sets the service provider from which to access the services.
StartBatchEdit ( ) : int
SuspendMSBuild ( ) : void	Suspends MSBuild
TransferItem ( string oldMkDoc, string newMkDoc, IVsWindowFrame frame ) : int	Implements IVsProject3::TransferItem This function is called when an open miscellaneous file is being transferred to our project. The sequence is for the shell to call AddItemWithSpecific and then use TransferItem to transfer the open document to our project.
UpdateTargetFramework ( IVsHierarchy pHier, string currentTargetFramework, string newTargetFramework ) : int
UpgradeProject ( uint grfUpgradeFlags ) : int

Защищенные методы

Метод	Описание
AddDependentFileNode ( MSBuild.ProjectItem>.IDictionary subitems, string key ) : HierarchyNode	This add methos adds the "key" item to the hierarchy, potentially adding other subitems in the process This method may recurse if the parent is an other subitem If the parent node was found we add the dependent item to it otherwise we add the item ignoring the "DependentUpon" metatdata
AddNewFileNodeToHierarchy ( HierarchyNode parentNode, string fileName ) : void	Adds a new file node to the hierarchy.
AddWebReference ( ) : int	Handles the Add web reference command.
AddWizardCustomParams ( HierarchyNode parent, string itemName, string>.Dictionary customParams ) : void
CanDeleteItem ( __VSDELETEITEMOPERATION deleteOperation ) : bool	Get the boolean value for the deletion of a project item
CanOverwriteExistingItem ( string originalFileName, string computedNewFileName ) : int	Determines whether an item can be owerwritten in the hierarchy.
CleanProject ( ) : int	Handles the clean project command.
CompareNodes ( HierarchyNode node1, HierarchyNode node2 ) : int	Used to sort nodes in the hierarchy.
CreateConfigProvider ( ) : ConfigProvider	Factory method for configuration provider
CreateFolderNode ( string path ) : FolderNode	Create FolderNode from Path
CreateFolderNode ( string path, ProjectElement element ) : FolderNode	To support virtual folders, override this method to return your own folder nodes
CreatePropertiesObject ( ) : NodeProperties
CreateReferenceContainerNode ( ) : ReferenceContainerNode	Factory method for reference container node
Dispose ( bool disposing ) : void	Disposes the project node object.
DoMSBuildSubmission ( BuildKind buildKind, string target, string>.Action uiThreadCallback ) : BuildSubmission	Start MSBuild build submission
ExecCommandOnNode ( Guid cmdGroup, uint cmd, uint nCmdexecopt, IntPtr pvaIn, IntPtr pvaOut ) : int	Handles command execution.
FilterItemTypeToBeAddedToHierarchy ( string itemType ) : bool	Filter items that should not be processed as file items. Example: Folders and References.
FlushBuildLoggerContent ( ) : void	Flush any remaining content from build logger. This method is called as part of the callback method passed to the buildsubmission during async build so that results can be printed the the build is fisinshed.
GetConfigurationDependentPropertyPages ( ) : Guid[]	Returns a list of Guids of the configuration dependent property pages. It is called by the GetProperty for VSHPROPID_CfgPropertyPagesCLSIDList property.
GetConfigurationIndependentPropertyPages ( ) : Guid[]	List of Guids of the config independent property pages. It is called by the GetProperty for VSHPROPID_PropertyPagesCLSIDList property.
GetDocumentManager ( ) : DocumentManager	Returns a specific Document manager to handle opening and closing of the Project(Application) Designer if projectdesigner is supported.
GetOutputGroupDescription ( string canonicalName ) : string	Get the description of the given output group.
GetOutputGroupDisplayName ( string canonicalName ) : string	Get the display name of the given output group.
GetOutputGroupNames ( ) : string>>.IList	This is the list of output groups that the configuration object should provide. The first string is the name of the group. The second string is the target name (MSBuild) for that group. To add/remove OutputGroups, simply override this method and edit the list. To get nice display names and description for your groups, override: - GetOutputGroupDisplayName - GetOutputGroupDescription
GetPriorityProjectDesignerPages ( ) : Guid[]	An ordered list of guids of the prefered property pages. See __VSHPROPID.VSHPROPID_PriorityPropertyPagesCLSIDList
GetSelectedNodes ( ) : IList	Gets the list of selected HierarchyNode objects
InitializeProjectProperties ( ) : void	Initialize common project properties with default value if they are empty The following common project properties are defaulted to projectName (if empty): AssemblyName, Name and RootNamespace. If the project filename is not set then no properties are set
IsCurrentStateASuppressCommandsMode ( ) : bool	Defines whther the current mode of the project is in a supress command mode.
IsFlavorDirty ( ) : int
IsItemTypeFileType ( string type ) : bool	Called by the project to know if the item is a file (that is part of the project) or an intermediate file used by the MSBuild tasks/targets Override this method if your project has more types or different ones
LoadNonBuildInformation ( ) : void	For flavored projects which implement IPersistXMLFragment, load the information now
LoadXmlFragment ( IPersistXMLFragment persistXmlFragment, string configName ) : void	Initialize an object with an XML fragment.
OverwriteExistingItem ( HierarchyNode existingNode ) : void	Handle owerwriting of an existing item in the hierarchy.
ProcessDependentFileNodes ( IList subitemsKeys, MSBuild.ProjectItem>.Dictionary subitems ) : void	Processes dependent filenodes from list of subitems. Multi level supported, but not circular dependencies.
ProcessFiles ( ) : void	Loads file items from the project file into the hierarchy.
ProcessFolders ( ) : void	Loads folders from the project file into the hierarchy.
ProcessReferences ( ) : void	Loads reference items from the project file into the hierarchy.
ProjectNode ( ) : System
QueryStatusOnNode ( Guid cmdGroup, uint cmd, IntPtr pCmdText, QueryStatusResult &result ) : int	Handles command status on the project node. If a command cannot be handled then the base should be called.
Reload ( ) : void	Reload project from project file
RenameProjectFile ( string newFile ) : void	Renames the project file
SaveAs ( string newFileName ) : int	Saves the project file on a new name.
SaveMSBuildProjectFileAs ( string newFileName ) : void	Saves project file related information to the new file name. It also calls msbuild API to save the project file. It is called by the SaveAs method and the SetEditLabel before the project file rename related events are triggered. An implementer can override this method to provide specialized semantics on how the project file is renamed in the msbuild file.
SetBuildConfigurationProperties ( string config ) : void	Set configuration properties for a specific configuration
SetConfiguration ( string configKey ) : void	Set the configuration property in MSBuild. This does not get persisted and is used to evaluate msbuild conditions which are based on the $(Configuration) property.
SetCurrentConfiguration ( ) : void	Set the configuration in MSBuild. This does not get persisted and is used to evaluate msbuild conditions which are based on the $(Configuration) property.
SetOutputLogger ( IVsOutputWindowPane output ) : void	Associate window output pane to the build logger
ShowAllFiles ( ) : int	Handles the shows all objects command.
UnloadProject ( ) : int	Unloads the project.
UpdateSccStateIcons ( ) : void	Recursevily walks the hierarchy nodes and redraws the state icons

Приватные методы

Метод	Описание
AddCATIDMapping ( Type type, System.Guid catid ) : void
AddDependentFileNodeToNode ( Microsoft.Build.Evaluation item, HierarchyNode parentNode ) : HierarchyNode	Add a dependent file node to the hierarchy
AddFileNodeToNode ( Microsoft.Build.Evaluation item, HierarchyNode parentNode ) : HierarchyNode	Add a file node to the hierarchy
AddFileToMsBuild ( string file ) : ProjectElement
AddFolderToMsBuild ( string folder ) : ProjectElement
AddIndependentFileNode ( Microsoft.Build.Evaluation item ) : HierarchyNode	Add an item to the hierarchy based on the item path
AddItemWithSpecific ( uint itemIdLoc, VSADDITEMOPERATION op, string itemName, uint filesToOpen, string files, IntPtr dlgOwner, uint editorFlags, Guid &editorType, string physicalView, Guid &logicalView, VSADDRESULT result ) : int
Build ( uint vsopts, string config, IVsOutputWindowPane output, string target ) : MSBuildResult
BuildAsync ( uint vsopts, string config, IVsOutputWindowPane output, string target, string>.Action uiThreadCallback ) : void
BuildPrelude ( IVsOutputWindowPane output ) : bool	Helper for sharing common code between Build() and BuildAsync()
ClonePropertyGroup ( Microsoft.Build.Construction group ) : Microsoft.Build.Construction.ProjectPropertyGroupElement	For internal use only. This creates a copy of an existing configuration and add it to the project. Caller should change the condition on the PropertyGroup. If derived class want to accomplish this, they should call ConfigProvider.AddCfgsOfCfgName() It is expected that in the future MSBuild will have support for this so we don't have to do it manually.
CloseAllNodes ( HierarchyNode node ) : void	Recusively parses the tree and closes all nodes.
CreateMsBuildFileItem ( string file, string itemType ) : ProjectElement
EndBuild ( BuildSubmission submission, bool designTime, bool requiresUIThread = false ) : void	Lets Visual Studio know that we're done with our design-time build so others can use the build manager. This method must be called on the UI thread.
GetAssemblyName ( Microsoft.Build.Execution properties ) : string
GetBaseDirectoryForAddingFiles ( HierarchyNode nodeToAddFile ) : string	Given a node determines what is the directory that can accept files. If the node is a FoldeNode than it is the Url of the Folder. If the node is a ProjectNode it is the project folder. Otherwise (such as FileNode subitem) it delegate the resolution to the parent node.
GetBoolAttr ( Microsoft.Build.Execution properties, string name ) : bool
GetBoolAttr ( string config, string name ) : bool
GetCATIDForType ( Type type ) : Guid
GetComponentPickerDirectories ( ) : string
GetConfigByCanonicalName ( string configCanonicalName ) : ProjectConfig
GetItemParentNode ( Microsoft.Build.Evaluation item ) : HierarchyNode	Get the parent node of an msbuild item
GetMsBuildProperty ( string propertyName, bool resetCache ) : Microsoft.Build.Execution.ProjectPropertyInstance
GetNestedProjectForHierarchy ( IVsHierarchy hierarchy ) : NestedProjectNode	Checks whether a hierarchy is a nested project.
GetOutputPath ( Microsoft.Build.Execution properties ) : string
GetProjectExtensions ( ) : Microsoft.Build.Construction.ProjectExtensionsElement	Get the project extensions
GetProjectOptions ( string config = null ) : ProjectOptions
GetWizardCustomParams ( HierarchyNode parent, string itemName ) : Array
IPersistFileFormat ( Guid &clsid ) : int
IVsBuildPropertyStorage ( string propertyName, string configName, uint storage ) : int	Delete a property In our case this simply mean defining it as null
IVsBuildPropertyStorage ( string propertyName, string configCanonicalName, uint storage, string &propertyValue ) : int	Get the value of the property in the project file
IVsBuildPropertyStorage ( uint item, string attributeName, string &attributeValue ) : int	Get the property of an item
IVsProjectFlavorCfgProvider ( IVsCfg pBaseProjectCfg, IVsProjectFlavorCfg &ppFlavorCfg ) : int
InitSccInfo ( ) : void	Sets the scc info from the project file.
Initialize ( ) : void	Initialize projectNode
InvokeMsBuild ( string target ) : MSBuildResult
IsFrameworkOnMachine ( ) : bool
Load ( string fileName, string location, string name, uint flags, Guid &iidProject, int &canceled ) : void
OnAfterProjectOpen ( object sender, AfterProjectFileOpenedEventArgs e ) : void
OnHandleConfigurationRelatedGlobalProperties ( object sender, ActiveConfigurationChangedEventArgs eventArgs ) : void
PerformTargetFrameworkCheck ( ) : bool
PersistXMLFragments ( ) : void
QueryEditProjectFile ( bool suppressUI ) : bool	Verify if the file can be written to. Return false if the file is read only and/or not checked out and the user did not give permission to change it. Note that exact behavior can also be affected based on the SCC settings under Tools->Options.
RegisterSccProject ( ) : void
RunWizard ( HierarchyNode parentNode, string itemName, string wizardToRun, IntPtr dlgOwner ) : VSADDRESULT
SetBuildProject ( Microsoft.Build.Evaluation project ) : void	Set the build project with the new project instance value
SetProjectExtensions ( string id, string xmlText ) : void	Set the xmlText as a project extension element with the id passed.
SetProjectGuidFromProjectFile ( ) : void	Sets the project guid from the project file. If no guid is found a new one is created and assigne for the instance project guid.
SetSccSettings ( string sccProjectName, string sccLocalPath, string sccAuxPath, string sccProvider ) : bool	Updates our scc project settings.
SetupProjectGlobalPropertiesThatAllProjectSystemsMustSet ( ) : void	Setup the global properties for project instance.
ShowRetargetingDialog ( ) : bool
TryBeginBuild ( bool designTime, bool requiresUIThread = false ) : bool	Attempts to lock in the privilege of running a build in Visual Studio. This method must be called on the UI thread.
UnRegisterProject ( ) : void
VerifySubFolderExists ( string path, HierarchyNode parent ) : FolderNode
WrapXmlFragment ( XmlDocument document, XmlElement root, Guid flavor, string configuration, string fragment ) : XmlElement

Описание методов

AddBuildDependency() публичный Метод

public AddBuildDependency ( IVsBuildDependency dependency ) : void
dependency	IVsBuildDependency
Результат	void

AddComponent() публичный Метод

Add Components to the Project. Used by the environment to add components specified by the user in the Component Selector dialog to the specified project

public AddComponent ( VSADDCOMPOPERATION dwAddCompOperation, uint cComponents, System rgpcsdComponents, System hwndDialog, VSADDCOMPRESULT pResult ) : int
dwAddCompOperation	VSADDCOMPOPERATION	The component operation to be performed.
cComponents	uint	Number of components to be added
rgpcsdComponents	System	array of component selector data
hwndDialog	System	Handle to the component picker dialog
pResult	VSADDCOMPRESULT	Result to be returned to the caller
Результат	int

AddDependentFileNode() защищенный Метод

This add methos adds the "key" item to the hierarchy, potentially adding other subitems in the process This method may recurse if the parent is an other subitem

If the parent node was found we add the dependent item to it otherwise we add the item ignoring the "DependentUpon" metatdata

protected AddDependentFileNode ( MSBuild.ProjectItem>.IDictionary subitems, string key ) : HierarchyNode
subitems	MSBuild.ProjectItem>.IDictionary	List of subitems not yet added to the hierarchy
key	string	Key to retrieve the target item from the subitems list
Результат	HierarchyNode

AddFileFromTemplate() публичный Метод

Called to add a file to the project from a template. Override to do it yourself if you want to customize the file

public AddFileFromTemplate ( string source, string target ) : void
source	string	Full path of template file
target	string	Full path of file once added to the project
Результат	void

AddItem() публичный Метод

public AddItem ( uint itemIdLoc, VSADDITEMOPERATION op, string itemName, uint filesToOpen, string files, IntPtr dlgOwner, VSADDRESULT result ) : int
itemIdLoc	uint
op	VSADDITEMOPERATION
itemName	string
filesToOpen	uint
files	string
dlgOwner	IntPtr
result	VSADDRESULT
Результат	int

AddNewFileNodeToHierarchy() защищенный Метод

Adds a new file node to the hierarchy.

protected AddNewFileNodeToHierarchy ( HierarchyNode parentNode, string fileName ) : void
parentNode	HierarchyNode	The parent of the new fileNode
fileName	string	The file name
Результат	void

AddProjectReference() публичный Метод

Override this method if you want to modify the behavior of the Add Reference dialog By example you could change which pages are visible and which is visible by default.

public AddProjectReference ( ) : int
Результат	int

AddWebReference() защищенный Метод

Handles the Add web reference command.

protected AddWebReference ( ) : int
Результат	int

AddWizardCustomParams() защищенный Метод

protected AddWizardCustomParams ( HierarchyNode parent, string itemName, string>.Dictionary customParams ) : void
parent	HierarchyNode
itemName	string
customParams	string>.Dictionary
Результат	void

Build() публичный Метод

Overloaded method. Invokes MSBuild using the default configuration and does without logging on the output window pane.

public Build ( string target ) : MSBuildResult
target	string
Результат	MSBuildResult

Build() публичный Метод

Overloaded method. Invokes MSBuild using the default configuration.

public Build ( string target, IVsOutputWindowPane output ) : MSBuildResult
target	string
output	IVsOutputWindowPane
Результат	MSBuildResult

Build() публичный Метод

Overloaded method to invoke MSBuild

public Build ( string config, IVsOutputWindowPane output, string target ) : MSBuildResult
config	string
output	IVsOutputWindowPane
target	string
Результат	MSBuildResult

Build() публичный Метод

Overloaded method to invoke MSBuild. Does not log build results to the output window pane.

public Build ( string config, string target ) : MSBuildResult
config	string
target	string
Результат	MSBuildResult

BuildTarget() публичный Метод

public BuildTarget ( string targetName, bool &success ) : int
targetName	string
success	bool
Результат	int

CallMSBuild() публичный Метод

Calls MSBuild if it is not suspended. Does not log and uses current configuration. If it is suspended then it will remeber to call when msbuild is resumed.

public CallMSBuild ( string target ) : MSBuildResult
target	string
Результат	MSBuildResult

CallMSBuild() публичный Метод

Calls MSBuild if it is not suspended. Uses current configuration. If it is suspended then it will remeber to call when msbuild is resumed.

public CallMSBuild ( string target, IVsOutputWindowPane output ) : MSBuildResult
target	string
output	IVsOutputWindowPane
Результат	MSBuildResult

CallMSBuild() публичный Метод

Calls MSBuild if it is not suspended. If it is suspended then it will remember to call when msbuild is resumed.

public CallMSBuild ( string config, IVsOutputWindowPane output, string target ) : MSBuildResult
config	string
output	IVsOutputWindowPane
target	string
Результат	MSBuildResult

CallMSBuild() публичный Метод

Overloaded method. Calls MSBuild if it is not suspended. Does not log on the outputwindow. If it is suspended then it will remeber to call when msbuild is resumed.

public CallMSBuild ( string config, string target ) : MSBuildResult
config	string
target	string
Результат	MSBuildResult

CanDeleteItem() защищенный Метод

Get the boolean value for the deletion of a project item

protected CanDeleteItem ( __VSDELETEITEMOPERATION deleteOperation ) : bool
deleteOperation	__VSDELETEITEMOPERATION	A flag that specifies the type of delete operation (delete from storage or remove from project)
Результат	bool

CanOverwriteExistingItem() защищенный Метод

Determines whether an item can be owerwritten in the hierarchy.

protected CanOverwriteExistingItem ( string originalFileName, string computedNewFileName ) : int
originalFileName	string	The orginal filname.
computedNewFileName	string	The computed new file name, that will be copied to the project directory or into the folder .
Результат	int

CancelBatchEdit() публичный Метод

public CancelBatchEdit ( ) : int
Результат	int

CleanProject() защищенный Метод

Handles the clean project command.

protected CleanProject ( ) : int
Результат	int

Close() публичный Метод

Closes the project node.

public Close ( ) : int
Результат	int

CompareNodes() защищенный Метод

Used to sort nodes in the hierarchy.

protected CompareNodes ( HierarchyNode node1, HierarchyNode node2 ) : int
node1	HierarchyNode
node2	HierarchyNode
Результат	int

CreateConfigProvider() защищенный Метод

Factory method for configuration provider

protected CreateConfigProvider ( ) : ConfigProvider
Результат	ConfigProvider

CreateFileNode() публичный Метод

Create a file node based on an msbuild item.

public CreateFileNode ( ProjectElement item ) : FileNode
item	ProjectElement	msbuild item
Результат	FileNode

CreateFileNode() публичный Метод

Create a file node based on a string.

public CreateFileNode ( string file ) : FileNode
file	string	filename of the new filenode
Результат	FileNode

CreateFolderNode() защищенный Метод

Create FolderNode from Path

protected CreateFolderNode ( string path ) : FolderNode
path	string	Path to folder
Результат	FolderNode

CreateFolderNode() защищенный Метод

To support virtual folders, override this method to return your own folder nodes

protected CreateFolderNode ( string path, ProjectElement element ) : FolderNode
path	string	Path to store for this folder
element	ProjectElement	Element corresponding to the folder
Результат	FolderNode

CreateFolderNodes() публичный Метод

Walks the subpaths of a project relative path and checks if the folder nodes hierarchy is already there, if not creates it.

public CreateFolderNodes ( string path ) : HierarchyNode
path	string
Результат	HierarchyNode

CreateProjectOptions() публичный Метод

Override this method if you have your own project specific subclass of ProjectOptions

public CreateProjectOptions ( ) : ProjectOptions
Результат	ProjectOptions

CreatePropertiesObject() защищенный Метод

protected CreatePropertiesObject ( ) : NodeProperties
Результат	NodeProperties

CreateReferenceContainerNode() защищенный Метод

Factory method for reference container node

protected CreateReferenceContainerNode ( ) : ReferenceContainerNode
Результат	ReferenceContainerNode

Dispose() защищенный Метод

Disposes the project node object.

protected Dispose ( bool disposing ) : void
disposing	bool	Flag determining ehether it was deterministic or non deterministic clean up.
Результат	void

DoMSBuildSubmission() защищенный Метод

Start MSBuild build submission

protected DoMSBuildSubmission ( BuildKind buildKind, string target, string>.Action uiThreadCallback ) : BuildSubmission
buildKind	BuildKind	Is it a Sync or ASync build
target	string	target to build
uiThreadCallback	string>.Action	callback to be run UI thread
Результат	BuildSubmission

EndBatchEdit() публичный Метод

public EndBatchEdit ( ) : int
Результат	int

EnumDependencies() публичный Метод

public EnumDependencies ( IVsEnumDependencies &enumDependencies ) : int
enumDependencies	IVsEnumDependencies
Результат	int

ExecCommandOnNode() защищенный Метод

Handles command execution.

protected ExecCommandOnNode ( Guid cmdGroup, uint cmd, uint nCmdexecopt, IntPtr pvaIn, IntPtr pvaOut ) : int
cmdGroup	Guid	Unique identifier of the command group
cmd	uint	The command to be executed.
nCmdexecopt	uint	Values describe how the object should execute the command.
pvaIn	IntPtr	Pointer to a VARIANTARG structure containing input arguments. Can be NULL
pvaOut	IntPtr	VARIANTARG structure to receive command output. Can be NULL.
Результат	int

FilterItemTypeToBeAddedToHierarchy() защищенный Метод

Filter items that should not be processed as file items. Example: Folders and References.

protected FilterItemTypeToBeAddedToHierarchy ( string itemType ) : bool
itemType	string
Результат	bool

FlushBuildLoggerContent() защищенный Метод

Flush any remaining content from build logger. This method is called as part of the callback method passed to the buildsubmission during async build so that results can be printed the the build is fisinshed.

protected FlushBuildLoggerContent ( ) : void
Результат	void

GenerateUniqueItemName() публичный Метод

for now used by add folder. Called on the ROOT, as only the project should need to implement this. for folders, called with parent folder, blank extension and blank suggested root

public GenerateUniqueItemName ( uint itemIdLoc, string ext, string suggestedRoot, string &itemName ) : int
itemIdLoc	uint
ext	string
suggestedRoot	string
itemName	string
Результат	int

GetAggregateProjectTypeGuids() публичный Метод

Retrieve the list of project GUIDs that are aggregated together to make this project.

public GetAggregateProjectTypeGuids ( string &projectTypeGuids ) : int
projectTypeGuids	string	Semi colon separated list of Guids. Typically, the last GUID would be the GUID of the base project factory
Результат	int

GetAssemblyName() публичный Метод

Get the assembly name for a give configuration

public GetAssemblyName ( string config ) : string
config	string	the matching configuration in the msbuild file
Результат	string

GetAutomationObject() публичный Метод

Gets the automation object for the project node.

public GetAutomationObject ( ) : object
Результат	object

GetBuildSystemKind() публичный Метод

Used to determine the kind of build system, in VS 2005 there's only one defined kind: MSBuild

public GetBuildSystemKind ( uint &kind ) : int
kind	uint
Результат	int

GetCfgProvider() публичный Метод

public GetCfgProvider ( IVsCfgProvider &p ) : int
p	IVsCfgProvider
Результат	int

GetClassID() публичный Метод

public GetClassID ( Guid &clsid ) : int
clsid	Guid
Результат	int

GetCompiler() публичный Метод

Returns the Compiler associated to the project

public GetCompiler ( ) : ICodeCompiler
Результат	ICodeCompiler

GetConfigurationDependentPropertyPages() защищенный Метод

Returns a list of Guids of the configuration dependent property pages. It is called by the GetProperty for VSHPROPID_CfgPropertyPagesCLSIDList property.

protected GetConfigurationDependentPropertyPages ( ) : Guid[]
Результат	Guid[]

GetConfigurationIndependentPropertyPages() защищенный Метод

List of Guids of the config independent property pages. It is called by the GetProperty for VSHPROPID_PropertyPagesCLSIDList property.

protected GetConfigurationIndependentPropertyPages ( ) : Guid[]
Результат	Guid[]

GetCurFile() публичный Метод

public GetCurFile ( string &name, uint &formatIndex ) : int
name	string
formatIndex	uint
Результат	int

GetDocumentManager() защищенный Метод

Returns a specific Document manager to handle opening and closing of the Project(Application) Designer if projectdesigner is supported.

protected GetDocumentManager ( ) : DocumentManager
Результат	DocumentManager

GetFile() публичный Метод

Allows you to query the project for special files and optionally create them.

public GetFile ( int fileId, uint flags, uint &itemid, string &fileName ) : int
fileId	int	__PSFFILEID of the file
flags	uint	__PSFFLAGS flags for the file
itemid	uint	The itemid of the node in the hierarchy
fileName	string	The file name of the special file.
Результат	int

GetFormatList() публичный Метод

public GetFormatList ( string &formatlist ) : int
formatlist	string
Результат	int

GetGuidProperty() публичный Метод

Gets the GUID value of the node.

public GetGuidProperty ( int propid, Guid &guid ) : int
propid	int	A __VSHPROPID or __VSHPROPID2 value of the guid property
guid	Guid	The guid to return for the property.
Результат	int

GetInner() публичный Метод

Get the inner object of an aggregated hierarchy

public GetInner ( ) : HierarchyNode
Результат	HierarchyNode

GetItemContext() публичный Метод

public GetItemContext ( uint itemId, Microsoft &psp ) : int
itemId	uint
psp	Microsoft
Результат	int

GetMkDocument() публичный Метод

Callback from the additem dialog. Deals with adding new and existing items

public GetMkDocument ( uint itemId, string &mkDoc ) : int
itemId	uint
mkDoc	string
Результат	int

GetMkDocument() публичный Метод

Gets the moniker for the project node. That is the full path of the project file.

public GetMkDocument ( ) : string
Результат	string

GetOutputAssembly() публичный Метод

Get output assembly for a specific configuration name

public GetOutputAssembly ( string config ) : string
config	string	Name of configuration
Результат	string

GetOutputGroupDescription() защищенный Метод

Get the description of the given output group.

protected GetOutputGroupDescription ( string canonicalName ) : string
canonicalName	string	Canonical name of the output group
Результат	string

GetOutputGroupDisplayName() защищенный Метод

Get the display name of the given output group.

protected GetOutputGroupDisplayName ( string canonicalName ) : string
canonicalName	string	Canonical name of the output group
Результат	string

GetOutputGroupNames() защищенный Метод

This is the list of output groups that the configuration object should provide. The first string is the name of the group. The second string is the target name (MSBuild) for that group. To add/remove OutputGroups, simply override this method and edit the list. To get nice display names and description for your groups, override: - GetOutputGroupDisplayName - GetOutputGroupDescription

protected GetOutputGroupNames ( ) : string>>.IList
Результат	string>>.IList

GetOutputPath() публичный Метод

Get the output path for a specific configuration name

public GetOutputPath ( string config ) : string
config	string	name of configuration
Результат	string

GetPriorityProjectDesignerPages() защищенный Метод

An ordered list of guids of the prefered property pages. See __VSHPROPID.VSHPROPID_PriorityPropertyPagesCLSIDList

protected GetPriorityProjectDesignerPages ( ) : Guid[]
Результат	Guid[]

GetProjectElement() публичный Метод

This method returns new project element based on existing MSBuild item. It does not modify/add project/build hierarchy at all.

public GetProjectElement ( Microsoft.Build.Evaluation item ) : ProjectElement
item	Microsoft.Build.Evaluation	MSBuild item instance
Результат	ProjectElement

GetProjectProperty() публичный Метод

Get value of Project property

public GetProjectProperty ( string propertyName ) : string
propertyName	string	Name of Property to retrieve
Результат	string

GetProjectProperty() публичный Метод

Return the value of a project property

public GetProjectProperty ( string propertyName, bool resetCache ) : string
propertyName	string	Name of the property to get
resetCache	bool	True to avoid using the cache
Результат	string

GetProjectPropertyUnevaluated() публичный Метод

Gets the unevaluated value of a project property.

public GetProjectPropertyUnevaluated ( string propertyName ) : string
propertyName	string	The name of the property to retrieve.
Результат	string

GetProperty() публичный Метод

Gets the properties of the project node.

public GetProperty ( int propId ) : object
propId	int	The __VSHPROPID of the property.
Результат	object

GetReferenceContainer() публичный Метод

Returns the reference container node.

public GetReferenceContainer ( ) : IReferenceContainer
Результат	IReferenceContainer

GetSccFiles() публичный Метод

This method is called to determine which files should be placed under source control for a given VSITEMID within this hierarchy.

public GetSccFiles ( uint itemid, CALPOLESTR stringsOut, CADWORD flagsOut ) : int
itemid	uint	Identifier for the VSITEMID being queried.
stringsOut	CALPOLESTR	Pointer to an array of CALPOLESTR strings containing the file names for this item.
flagsOut	CADWORD	Pointer to a CADWORD array of flags stored in DWORDs indicating that some of the files have special behaviors.
Результат	int

GetSccSpecialFiles() публичный Метод

This method is called to discover special (hidden files) associated with a given VSITEMID within this hierarchy.

This method is called to discover any special or hidden files associated with an item in the project hierarchy. It is called when GetSccFiles returns with the SFF_HasSpecialFiles flag set for any of the files associated with the node.

public GetSccSpecialFiles ( uint itemid, string sccFile, CALPOLESTR stringsOut, CADWORD flagsOut ) : int
itemid	uint	Identifier for the VSITEMID being queried.
sccFile	string	One of the files associated with the node
stringsOut	CALPOLESTR	Pointer to an array of CALPOLESTR strings containing the file names for this item.
flagsOut	CADWORD	Pointer to a CADWORD array of flags stored in DWORDs indicating that some of the files have special behaviors.
Результат	int

GetSelectedNodes() защищенный Метод

Gets the list of selected HierarchyNode objects

protected GetSelectedNodes ( ) : IList
Результат	IList

GetTargetFramework() публичный Метод

public GetTargetFramework ( string &ppTargetFramework ) : int
ppTargetFramework	string
Результат	int

InitNew() публичный Метод

public InitNew ( uint formatIndex ) : int
formatIndex	uint
Результат	int

InitializeForOuter() публичный Метод

This is where the initialization occurs.

public InitializeForOuter ( string filename, string location, string name, uint flags, Guid &iid, IntPtr &projectPointer, int &canceled ) : int
filename	string
location	string
name	string
flags	uint
iid	Guid
projectPointer	IntPtr
canceled	int
Результат	int

InitializeProjectProperties() защищенный Метод

Initialize common project properties with default value if they are empty

The following common project properties are defaulted to projectName (if empty): AssemblyName, Name and RootNamespace. If the project filename is not set then no properties are set

protected InitializeProjectProperties ( ) : void
Результат	void

IsCodeFile() публичный Метод

Determines whether a file is a code file.

public IsCodeFile ( string fileName ) : bool
fileName	string	Name of the file to be evaluated
Результат	bool

IsCurrentStateASuppressCommandsMode() защищенный Метод

Defines whther the current mode of the project is in a supress command mode.

protected IsCurrentStateASuppressCommandsMode ( ) : bool
Результат	bool

IsDirty() публичный Метод

public IsDirty ( int &isDirty ) : int
isDirty	int
Результат	int

IsDocumentInProject() публичный Метод

public IsDocumentInProject ( string mkDoc, int &found, VSDOCUMENTPRIORITY pri, uint &itemId ) : int
mkDoc	string
found	int
pri	VSDOCUMENTPRIORITY
itemId	uint
Результат	int

IsEmbeddedResource() публичный Метод

Determines whether the given file is a resource file (resx file).

public IsEmbeddedResource ( string fileName ) : bool
fileName	string	Name of the file to be evaluated.
Результат	bool

IsFlavorDirty() защищенный Метод

protected IsFlavorDirty ( ) : int
Результат	int

IsItemTypeFileType() защищенный Метод

Called by the project to know if the item is a file (that is part of the project) or an intermediate file used by the MSBuild tasks/targets Override this method if your project has more types or different ones

protected IsItemTypeFileType ( string type ) : bool
type	string	Type name
Результат	bool

Load() публичный Метод

public Load ( string fileName, uint mode, int readOnly ) : int
fileName	string
mode	uint
readOnly	int
Результат	int

LoadNonBuildInformation() защищенный Метод

For flavored projects which implement IPersistXMLFragment, load the information now

protected LoadNonBuildInformation ( ) : void
Результат	void

LoadXmlFragment() защищенный Метод

Initialize an object with an XML fragment.

protected LoadXmlFragment ( IPersistXMLFragment persistXmlFragment, string configName ) : void
persistXmlFragment	IPersistXMLFragment
configName	string	Name of the configuration being initialized, null if it is the project
Результат	void

NodeFromItemId() публичный Метод

Get Node from ItemID.

public NodeFromItemId ( uint itemId ) : HierarchyNode
itemId	uint	ItemID for the requested node
Результат	HierarchyNode

NodeHasDesigner() публичный Метод

Defines if Node has Designer. By default we do not support designers for nodes

public NodeHasDesigner ( string itemPath ) : bool
itemPath	string	Path to item to query for designer support
Результат	bool

OnAggregationComplete() публичный Метод

This is called after the project is done initializing the different layer of the aggregations

public OnAggregationComplete ( ) : int
Результат	int

OnOpenItem() публичный Метод

Called when the project opens an editor window for the given file

public OnOpenItem ( string fullPathToSourceFile ) : void
fullPathToSourceFile	string
Результат	void

OnTargetFrameworkMonikerChanged() публичный Метод

public OnTargetFrameworkMonikerChanged ( ProjectOptions options, FrameworkName currentTargetFramework, FrameworkName newTargetFramework ) : void
options	ProjectOptions
currentTargetFramework	FrameworkName
newTargetFramework	FrameworkName
Результат	void

OpenDependency() публичный Метод

public OpenDependency ( string szDependencyCanonicalName, IVsDependency &dependency ) : int
szDependencyCanonicalName	string
dependency	IVsDependency
Результат	int

OpenItem() публичный Метод

public OpenItem ( uint itemId, Guid &logicalView, IntPtr punkDocDataExisting, IVsWindowFrame &frame ) : int
itemId	uint
logicalView	Guid
punkDocDataExisting	IntPtr
frame	IVsWindowFrame
Результат	int

OpenItemWithSpecific() публичный Метод

public OpenItemWithSpecific ( uint itemId, uint editorFlags, Guid &editorType, string physicalView, Guid &logicalView, IntPtr docDataExisting, IVsWindowFrame &frame ) : int
itemId	uint
editorFlags	uint
editorType	Guid
physicalView	string
logicalView	Guid
docDataExisting	IntPtr
frame	IVsWindowFrame
Результат	int

OverwriteExistingItem() защищенный Метод

Handle owerwriting of an existing item in the hierarchy.

protected OverwriteExistingItem ( HierarchyNode existingNode ) : void
existingNode	HierarchyNode	The node that exists.
Результат	void

PrepareBuild() публичный Метод

This is called from the main thread before the background build starts. cleanBuild is not part of the vsopts, but passed down as the callpath is differently PrepareBuild mainly creates directories and cleans house if cleanBuild is true

public PrepareBuild ( string config, bool cleanBuild ) : void
config	string
cleanBuild	bool
Результат	void

ProcessDependentFileNodes() защищенный Метод

Processes dependent filenodes from list of subitems. Multi level supported, but not circular dependencies.

protected ProcessDependentFileNodes ( IList subitemsKeys, MSBuild.ProjectItem>.Dictionary subitems ) : void
subitemsKeys	IList	List of sub item keys
subitems	MSBuild.ProjectItem>.Dictionary
Результат	void

ProcessFiles() защищенный Метод

Loads file items from the project file into the hierarchy.

protected ProcessFiles ( ) : void
Результат	void

ProcessFolders() защищенный Метод

Loads folders from the project file into the hierarchy.

protected ProcessFolders ( ) : void
Результат	void

ProcessReferences() защищенный Метод

Loads reference items from the project file into the hierarchy.

protected ProcessReferences ( ) : void
Результат	void

ProjectNode() защищенный Метод

protected ProjectNode ( ) : System
Результат	System

QueryStatusOnNode() защищенный Метод

Handles command status on the project node. If a command cannot be handled then the base should be called.

protected QueryStatusOnNode ( Guid cmdGroup, uint cmd, IntPtr pCmdText, QueryStatusResult &result ) : int
cmdGroup	Guid	A unique identifier of the command group. The pguidCmdGroup parameter can be NULL to specify the standard group.
cmd	uint	The command to query status for.
pCmdText	IntPtr	Pointer to an OLECMDTEXT structure in which to return the name and/or status information of a single command. Can be NULL to indicate that the caller does not require this information.
result	QueryStatusResult	An out parameter specifying the QueryStatusResult of the command.
Результат	int

Reload() защищенный Метод

Reload project from project file

protected Reload ( ) : void
Результат	void

Remove() публичный Метод

Removes items from the hierarchy.

public Remove ( bool removeFromStorage ) : void
removeFromStorage	bool
Результат	void

RemoveBuildDependency() публичный Метод

public RemoveBuildDependency ( IVsBuildDependency dependency ) : void
dependency	IVsBuildDependency
Результат	void

RemoveItem() публичный Метод

public RemoveItem ( uint reserved, uint itemId, int &result ) : int
reserved	uint
itemId	uint
result	int
Результат	int

RenameProjectFile() защищенный Метод

Renames the project file

protected RenameProjectFile ( string newFile ) : void
newFile	string	The full path of the new project file.
Результат	void

ReopenItem() публичный Метод

public ReopenItem ( uint itemId, Guid &editorType, string physicalView, Guid &logicalView, IntPtr docDataExisting, IVsWindowFrame &frame ) : int
itemId	uint
editorType	Guid
physicalView	string
logicalView	Guid
docDataExisting	IntPtr
frame	IVsWindowFrame
Результат	int

ResolveAssemblyPathInTargetFx() публичный Метод

public ResolveAssemblyPathInTargetFx ( string prgAssemblySpecs, uint cAssembliesToResolve, VsResolvedAssemblyPath prgResolvedAssemblyPaths, uint &pcResolvedAssemblyPaths ) : int
prgAssemblySpecs	string
cAssembliesToResolve	uint
prgResolvedAssemblyPaths	VsResolvedAssemblyPath
pcResolvedAssemblyPaths	uint
Результат	int

ResumeMSBuild() публичный Метод

Resumes MSBuild.

public ResumeMSBuild ( string target ) : void
target	string
Результат	void

ResumeMSBuild() публичный Метод

Resumes MSBuild.

public ResumeMSBuild ( string config, IVsOutputWindowPane output, string target ) : void
config	string
output	IVsOutputWindowPane
target	string
Результат	void

ResumeMSBuild() публичный Метод

Resumes MSBuild.

public ResumeMSBuild ( string config, string target ) : void
config	string
target	string
Результат	void

Save() публичный Метод

public Save ( string fileToBeSaved, int remember, uint formatIndex ) : int
fileToBeSaved	string
remember	int
formatIndex	uint
Результат	int

SaveAs() защищенный Метод

Saves the project file on a new name.

protected SaveAs ( string newFileName ) : int
newFileName	string	The new name of the project file.
Результат	int

SaveCompleted() публичный Метод

public SaveCompleted ( string filename ) : int
filename	string
Результат	int

SaveMSBuildProjectFileAs() защищенный Метод

Saves project file related information to the new file name. It also calls msbuild API to save the project file. It is called by the SaveAs method and the SetEditLabel before the project file rename related events are triggered. An implementer can override this method to provide specialized semantics on how the project file is renamed in the msbuild file.

protected SaveMSBuildProjectFileAs ( string newFileName ) : void
newFileName	string	The new full path of the project file
Результат	void

SccGlyphChanged() публичный Метод

This method is called by the source control portion of the environment to inform the project of changes to the source control glyph on various nodes.

public SccGlyphChanged ( int affectedNodes, uint itemidAffectedNodes, VsStateIcon newGlyphs, uint newSccStatus ) : int
affectedNodes	int	Count of changed nodes.
itemidAffectedNodes	uint	An array of VSITEMID identifiers of the changed nodes.
newGlyphs	VsStateIcon	An array of VsStateIcon glyphs representing the new state of the corresponding item in rgitemidAffectedNodes.
newSccStatus	uint	An array of status flags from SccStatus corresponding to rgitemidAffectedNodes.
Результат	int

SetAggregateProjectTypeGuids() публичный Метод

Set the list of GUIDs that are aggregated together to create this project.

public SetAggregateProjectTypeGuids ( string projectTypeGuids ) : int
projectTypeGuids	string	Semi-colon separated list of GUIDs, the last one is usually the project factory of the base project factory
Результат	int

SetBuildConfigurationProperties() защищенный Метод

Set configuration properties for a specific configuration

protected SetBuildConfigurationProperties ( string config ) : void
config	string	configuration name
Результат	void

SetConfiguration() защищенный Метод

Set the configuration property in MSBuild. This does not get persisted and is used to evaluate msbuild conditions which are based on the $(Configuration) property.

protected SetConfiguration ( string configKey ) : void
configKey	string	Configuration name
Результат	void

SetCurrentConfiguration() защищенный Метод

Set the configuration in MSBuild. This does not get persisted and is used to evaluate msbuild conditions which are based on the $(Configuration) property.

protected SetCurrentConfiguration ( ) : void
Результат	void

SetEditLabel() публичный Метод

Renames the project node.

public SetEditLabel ( string label ) : int
label	string	The new name
Результат	int

SetGuidProperty() публичный Метод

Sets Guid properties for the project node.

public SetGuidProperty ( int propid, Guid &guid ) : int
propid	int	A __VSHPROPID or __VSHPROPID2 value of the guid property
guid	Guid	The guid value to set.
Результат	int

SetHostObject() публичный Метод

public SetHostObject ( string targetName, string taskName, object hostObject ) : int
targetName	string
taskName	string
hostObject	object
Результат	int

SetInnerProject() публичный Метод

We are always the inner most part of the aggregation and as such we don't support setting an inner project

public SetInnerProject ( object innerProject ) : int
innerProject	object
Результат	int

SetOutputLogger() защищенный Метод

Associate window output pane to the build logger

protected SetOutputLogger ( IVsOutputWindowPane output ) : void
output	IVsOutputWindowPane
Результат	void

SetProjectFileDirty() публичный Метод

Set dirty state of project

public SetProjectFileDirty ( bool value ) : void
value	bool	boolean value indicating dirty state
Результат	void

SetProjectProperty() публичный Метод

Set value of project property

public SetProjectProperty ( string propertyName, string propertyValue ) : void
propertyName	string	Name of property
propertyValue	string	Value of property
Результат	void

SetProperty() публичный Метод

Sets the properties for the project node.

public SetProperty ( int propid, object value ) : int
propid	int	Identifier of the hierarchy property. For a list of propid values,
value	object	The value to set.
Результат	int

SetSccLocation() публичный Метод

This method is called by the source control portion of the environment when a project is initially added to source control, or to change some of the project's settings.

public SetSccLocation ( string sccProjectName, string sccAuxPath, string sccLocalPath, string sccProvider ) : int
sccProjectName	string	String, opaque to the project, that identifies the project location on the server. Persist this string in the project file.
sccAuxPath	string	String, opaque to the project, that identifies the local path to the project. Persist this string in the project file.
sccLocalPath	string	String, opaque to the project, that identifies the path to the server. Persist this string in the project file.
sccProvider	string	String, opaque to the project, that identifies the source control package. Persist this string in the project file.
Результат	int

SetSite() публичный Метод

Sets the service provider from which to access the services.

public SetSite ( Microsoft site ) : int
site	Microsoft	An instance to an Microsoft.VisualStudio.OLE.Interop object
Результат	int

ShowAllFiles() защищенный Метод

Handles the shows all objects command.

protected ShowAllFiles ( ) : int
Результат	int

StartBatchEdit() публичный Метод

public StartBatchEdit ( ) : int
Результат	int

SuspendMSBuild() публичный Метод

Suspends MSBuild

public SuspendMSBuild ( ) : void
Результат	void

TransferItem() публичный Метод

Implements IVsProject3::TransferItem This function is called when an open miscellaneous file is being transferred to our project. The sequence is for the shell to call AddItemWithSpecific and then use TransferItem to transfer the open document to our project.

public TransferItem ( string oldMkDoc, string newMkDoc, IVsWindowFrame frame ) : int
oldMkDoc	string	Old document name
newMkDoc	string	New document name
frame	IVsWindowFrame	Optional frame if the document is open
Результат	int

UnloadProject() защищенный Метод

Unloads the project.

protected UnloadProject ( ) : int
Результат	int

UpdateSccStateIcons() защищенный Метод

Recursevily walks the hierarchy nodes and redraws the state icons

protected UpdateSccStateIcons ( ) : void
Результат	void

UpdateTargetFramework() публичный Метод

public UpdateTargetFramework ( IVsHierarchy pHier, string currentTargetFramework, string newTargetFramework ) : int
pHier	IVsHierarchy
currentTargetFramework	string
newTargetFramework	string
Результат	int

UpgradeProject() публичный Метод

public UpgradeProject ( uint grfUpgradeFlags ) : int
grfUpgradeFlags	uint
Результат	int