• Главная
• Gralin
• NETMF
• Nordic
• NRF24L01Plus

C# Класс Gralin.NETMF.Nordic.NRF24L01Plus

Показать файл Открыть проект Примеры использования класса

Открытые свойства

Свойство	Тип	Описание
_def_rx_addr_p0	byte[]
_def_rx_addr_p1	byte[]
_def_rx_addr_p2	byte[]
_def_rx_addr_p3	byte[]
_def_rx_addr_p4	byte[]
_def_rx_addr_p5	byte[]
slot	AddressSlot[]

Открытые методы

Метод	Описание
Configure ( byte address, byte channel ) : void	Configure the module basic settings. Module needs to be initiaized.
Disable ( ) : void	Disables the module
DisableAA ( AddressSlot s ) : void	Disables the auto-auknowledge for a specific module address slot
DisableRX ( AddressSlot s ) : void	Disables a specific module address slot for reception
Enable ( ) : void	Enables the module
EnableAA ( AddressSlot s ) : void	Enables the auto-auknowledge for a specific module address slot
EnableRX ( AddressSlot s ) : void	Enables a specific module address slot for reception
Execute ( byte command, byte addres, byte data ) : byte[]	Executes a command in NRF24L01+ (for details see module datasheet)
GetAddress ( AddressSlot slot, int width ) : byte[]	Read 1 of 6 available module addresses
GetChannel ( ) : byte	Reads the current rf channel value set in module
GetDefaultAddress ( AddressSlot s ) : byte[]
GetFrequency ( ) : int	Gets the module radio frequency [MHz]
GetStatus ( ) : Status	Gets module basic status information
Initialize ( DriverExpand.SPI spi, DriverExpand.OutputPort chipEnablePin, InterruptPort interruptPort ) : void	Initializes SPI connection and control pins
NRF24L01Plus ( ) : System
SendTo ( byte address, byte bytes, int timeout ) : bool	Sends bytes to given address This is a blocking method that returns true if data was received by the recipient or false if timeout occured.
SendTo ( byte address, byte bytes ) : void	Send bytes to given address This is a non blocking method.
SetAddress ( AddressSlot s, byte address, bool EN_AA ) : void	Set one of 6 available module addresses and enables it when in RX mode, sets also auto-ack if EN_AA is true
SetChannel ( byte channel ) : void	Sets the rf channel value used by all data pipes
SetFixedPayload ( int size ) : void	Sets fixed payload paquets of size bytes weitdh.
SetToDefaultAddress ( AddressSlot s ) : void	Set one of 6 available module addresses to its default value and disables it

Приватные методы

Метод	Описание
CheckIsInitialized ( ) : void
HandleInterrupt ( uint data1, uint data2, System.DateTime dateTime ) : void	returns the first free pipe loacted or 9 if there are not free pipes available
SetDisabled ( ) : void
SetEnabled ( ) : void
SetReceiveMode ( ) : void
SetTransmitMode ( ) : void
equals ( byte a1, byte a2 ) : bool

Описание методов

Описание свойств