C# Класс FTD2XX_NET.FTDI

Class wrapper for FTD2XX.DLL

Показать файл Открыть проект Примеры использования класса

Private Properties

Свойство	Тип	Описание
ErrorHandler	void
FreeLibrary	bool
GetProcAddress	System.IntPtr
LoadLibrary	System.IntPtr

Открытые методы

Метод	Описание
Close ( ) : FT_STATUS	Closes the handle to an open FTDI device.
CyclePort ( ) : FT_STATUS	Causes the device to be re-enumerated on the USB bus. This is equivalent to unplugging and replugging the device. Also calls FT_Close if FT_CyclePort is successful, so no need to call this separately in the application.
EEReadUserArea ( byte UserAreaDataBuffer, UInt32 &numBytesRead ) : FT_STATUS	Reads data from the user area of the device EEPROM.
EEUserAreaSize ( UInt32 &UASize ) : FT_STATUS	Gets the size of the EEPROM user area.
EEWriteUserArea ( byte UserAreaDataBuffer ) : FT_STATUS	Writes data to the user area of the device EEPROM.
EraseEEPROM ( ) : FT_STATUS	Erases the device EEPROM.
FTDI ( ) : System	Constructor for the FTDI class.
GetCOMPort ( string &ComPortName ) : FT_STATUS	Gets the corresponding COM port number for the current device. If no COM port is exposed, an empty string is returned.
GetDescription ( string &Description ) : FT_STATUS	Gets the description of the current device.
GetDeviceID ( UInt32 &DeviceID ) : FT_STATUS	Gets the Vendor ID and Product ID of the current device.
GetDeviceList ( FT_DEVICE_INFO_NODE devicelist ) : FT_STATUS	Gets information on all of the FTDI devices available.
GetDeviceType ( FT_DEVICE &DeviceType ) : FT_STATUS	Gets the chip type of the current device.
GetDriverVersion ( UInt32 &DriverVersion ) : FT_STATUS	Gets the current FTDIBUS.SYS driver version number.
GetEventType ( UInt32 &EventType ) : FT_STATUS	Gets the event type after an event has fired. Can be used to distinguish which event has been triggered when waiting on multiple event types.
GetLatency ( byte &Latency ) : FT_STATUS	Gets the value of the latency timer. Default value is 16ms.
GetLibraryVersion ( UInt32 &LibraryVersion ) : FT_STATUS	Gets the current FTD2XX.DLL driver version number.
GetLineStatus ( byte &LineStatus ) : FT_STATUS	Gets the current line status.
GetModemStatus ( byte &ModemStatus ) : FT_STATUS	Gets the current modem status.
GetNumberOfDevices ( UInt32 &devcount ) : FT_STATUS	Gets the number of FTDI devices available.
GetPinStates ( byte &BitMode ) : FT_STATUS	Gets the instantaneous state of the device IO pins.
GetRxBytesAvailable ( UInt32 &RxQueue ) : FT_STATUS	Gets the number of bytes available in the receive buffer.
GetSerialNumber ( string &SerialNumber ) : FT_STATUS	Gets the serial number of the current device.
GetTxBytesWaiting ( UInt32 &TxQueue ) : FT_STATUS	Gets the number of bytes waiting in the transmit buffer.
InTransferSize ( UInt32 InTransferSize ) : FT_STATUS	Sets the USB IN and OUT transfer sizes.
OpenByDescription ( string description ) : FT_STATUS	Opens the FTDI device with the specified description. Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.
OpenByIndex ( UInt32 index ) : FT_STATUS	Opens the FTDI device with the specified index. Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.
OpenByLocation ( UInt32 location ) : FT_STATUS	Opens the FTDI device at the specified physical location. Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.
OpenBySerialNumber ( string serialnumber ) : FT_STATUS	Opens the FTDI device with the specified serial number. Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.
Purge ( UInt32 purgemask ) : FT_STATUS	Purge data from the devices transmit and/or receive buffers.
Read ( byte dataBuffer, UInt32 numBytesToRead, UInt32 &numBytesRead ) : FT_STATUS	Read data from an open FTDI device.
Read ( string &dataBuffer, UInt32 numBytesToRead, UInt32 &numBytesRead ) : FT_STATUS	Read data from an open FTDI device.
ReadEEPROMLocation ( UInt32 Address, UInt16 &EEValue ) : FT_STATUS	Reads an individual word value from a specified location in the device's EEPROM.
ReadFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 ) : FT_STATUS	Reads the EEPROM contents of an FT2232 device.
ReadFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h ) : FT_STATUS	Reads the EEPROM contents of an FT2232H device.
ReadFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b ) : FT_STATUS	Reads the EEPROM contents of an FT232B or FT245B device.
ReadFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h ) : FT_STATUS	Reads the EEPROM contents of an FT232H device.
ReadFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r ) : FT_STATUS	Reads the EEPROM contents of an FT232R or FT245R device. Calls FT_EE_Read in FTD2XX DLL
ReadFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h ) : FT_STATUS	Reads the EEPROM contents of an FT4232H device.
ReadXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX ) : FT_STATUS	Reads the EEPROM contents of an X-Series device.
Reload ( UInt16 VendorID, UInt16 ProductID ) : FT_STATUS	Forces a reload of the driver for devices with a specific VID and PID combination. If the VID and PID parameters are 0, the drivers for USB root hubs will be reloaded, causing all USB devices connected to reload their drivers
Rescan ( ) : FT_STATUS	Causes the system to check for USB hardware changes. This is equivalent to clicking on the "Scan for hardware changes" button in the Device Manager.
ResetDevice ( ) : FT_STATUS	Reset an open FTDI device.
ResetPort ( ) : FT_STATUS	Resets the device port.
RestartInTask ( ) : FT_STATUS	Resumes the driver issuing USB in requests.
SetBaudRate ( UInt32 BaudRate ) : FT_STATUS	Sets the current Baud rate.
SetBitMode ( byte Mask, byte BitMode ) : FT_STATUS	Puts the device in a mode other than the default UART or FIFO mode.
SetBreak ( bool Enable ) : FT_STATUS	Sets or clears the break state.
SetCharacters ( byte EventChar, bool EventCharEnable, byte ErrorChar, bool ErrorCharEnable ) : FT_STATUS	Sets an event character, an error character and enables or disables them.
SetDTR ( bool Enable ) : FT_STATUS	Asserts or de-asserts the Data Terminal Ready (DTR) line.
SetDataCharacteristics ( byte DataBits, byte StopBits, byte Parity ) : FT_STATUS	Sets the data bits, stop bits and parity for the device.
SetDeadmanTimeout ( UInt32 DeadmanTimeout ) : FT_STATUS	Sets the USB deadman timeout value. Default is 5000ms.
SetEventNotification ( UInt32 eventmask, EventWaitHandle eventhandle ) : FT_STATUS	Register for event notification. After setting event notification, the event can be caught by executing the WaitOne() method of the EventWaitHandle. If multiple event types are being monitored, the event that fired can be determined from the GetEventType method.
SetFlowControl ( UInt16 FlowControl, byte Xon, byte Xoff ) : FT_STATUS	Sets the flow control type.
SetLatency ( byte Latency ) : FT_STATUS	Sets the value of the latency timer. Default value is 16ms.
SetRTS ( bool Enable ) : FT_STATUS	Asserts or de-asserts the Request To Send (RTS) line.
SetResetPipeRetryCount ( UInt32 ResetPipeRetryCount ) : FT_STATUS	Gets or sets the reset pipe retry count. Default value is 50.
SetTimeouts ( UInt32 ReadTimeout, UInt32 WriteTimeout ) : FT_STATUS	Sets the read and write timeout values.
StopInTask ( ) : FT_STATUS	Stops the driver issuing USB in requests.
Write ( byte dataBuffer, Int32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS	Write data to an open FTDI device.
Write ( byte dataBuffer, UInt32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS	Write data to an open FTDI device.
Write ( string dataBuffer, Int32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS	Write data to an open FTDI device.
Write ( string dataBuffer, UInt32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS	Write data to an open FTDI device.
WriteEEPROMLocation ( UInt32 Address, UInt16 EEValue ) : FT_STATUS	Writes an individual word value to a specified location in the device's EEPROM.
WriteFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 ) : FT_STATUS	Writes the specified values to the EEPROM of an FT2232 device. Calls FT_EE_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths
WriteFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h ) : FT_STATUS	Writes the specified values to the EEPROM of an FT2232H device. Calls FT_EE_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths
WriteFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b ) : FT_STATUS	Writes the specified values to the EEPROM of an FT232B or FT245B device. If the strings are too long, they will be truncated to their maximum permitted lengths
WriteFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h ) : FT_STATUS	Writes the specified values to the EEPROM of an FT232H device. Calls FT_EE_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths
WriteFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r ) : FT_STATUS	Writes the specified values to the EEPROM of an FT232R or FT245R device. Calls FT_EE_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths
WriteFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h ) : FT_STATUS	Writes the specified values to the EEPROM of an FT4232H device. Calls FT_EE_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths
WriteXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX ) : FT_STATUS	Writes the specified values to the EEPROM of an X-Series device. Calls FT_EEPROM_Program in FTD2XX DLL If the strings are too long, they will be truncated to their maximum permitted lengths

Приватные методы

Метод	Описание
ErrorHandler ( FT_STATUS ftStatus, FT_ERROR ftErrorCondition ) : void	Method to check ftStatus and ftErrorCondition values for error conditions and throw exceptions accordingly.
FreeLibrary ( IntPtr hModule ) : bool
GetProcAddress ( IntPtr hModule, string procedureName ) : IntPtr
LoadLibrary ( string dllToLoad ) : IntPtr

Описание методов

Close() публичный Метод

Closes the handle to an open FTDI device.

public Close ( ) : FT_STATUS
Результат	FT_STATUS

CyclePort() публичный Метод

Causes the device to be re-enumerated on the USB bus. This is equivalent to unplugging and replugging the device. Also calls FT_Close if FT_CyclePort is successful, so no need to call this separately in the application.

public CyclePort ( ) : FT_STATUS
Результат	FT_STATUS

EEReadUserArea() публичный Метод

Reads data from the user area of the device EEPROM.

public EEReadUserArea ( byte UserAreaDataBuffer, UInt32 &numBytesRead ) : FT_STATUS
UserAreaDataBuffer	byte	An array of bytes which will be populated with the data read from the device EEPROM user area.
numBytesRead	System.UInt32	The number of bytes actually read from the EEPROM user area.
Результат	FT_STATUS

EEUserAreaSize() публичный Метод

Gets the size of the EEPROM user area.

public EEUserAreaSize ( UInt32 &UASize ) : FT_STATUS
UASize	System.UInt32	The EEPROM user area size in bytes.
Результат	FT_STATUS

EEWriteUserArea() публичный Метод

Writes data to the user area of the device EEPROM.

public EEWriteUserArea ( byte UserAreaDataBuffer ) : FT_STATUS
UserAreaDataBuffer	byte	An array of bytes which will be written to the device EEPROM user area.
Результат	FT_STATUS

EraseEEPROM() публичный Метод

Erases the device EEPROM.

Thrown when attempting to erase the EEPROM of a device with an internal EEPROM such as an FT232R or FT245R.

public EraseEEPROM ( ) : FT_STATUS
Результат	FT_STATUS

FTDI() публичный Метод

Constructor for the FTDI class.

public FTDI ( ) : System
Результат	System

GetCOMPort() публичный Метод

Gets the corresponding COM port number for the current device. If no COM port is exposed, an empty string is returned.

public GetCOMPort ( string &ComPortName ) : FT_STATUS
ComPortName	string	The COM port name corresponding to the current device. If no COM port is installed, an empty string is passed back.
Результат	FT_STATUS

GetDescription() публичный Метод

Gets the description of the current device.

public GetDescription ( string &Description ) : FT_STATUS
Description	string	The description of the current device.
Результат	FT_STATUS

GetDeviceID() публичный Метод

Gets the Vendor ID and Product ID of the current device.

public GetDeviceID ( UInt32 &DeviceID ) : FT_STATUS
DeviceID	System.UInt32	The device ID (Vendor ID and Product ID) of the current device.
Результат	FT_STATUS

GetDeviceList() публичный Метод

Gets information on all of the FTDI devices available.

Thrown when the supplied buffer is not large enough to contain the device info list.

public GetDeviceList ( FT_DEVICE_INFO_NODE devicelist ) : FT_STATUS
devicelist	FT_DEVICE_INFO_NODE	An array of type FT_DEVICE_INFO_NODE to contain the device information for all available devices.
Результат	FT_STATUS

GetDeviceType() публичный Метод

Gets the chip type of the current device.

public GetDeviceType ( FT_DEVICE &DeviceType ) : FT_STATUS
DeviceType	FT_DEVICE	The FTDI chip type of the current device.
Результат	FT_STATUS

GetDriverVersion() публичный Метод

Gets the current FTDIBUS.SYS driver version number.

public GetDriverVersion ( UInt32 &DriverVersion ) : FT_STATUS
DriverVersion	System.UInt32	The current driver version number.
Результат	FT_STATUS

GetEventType() публичный Метод

Gets the event type after an event has fired. Can be used to distinguish which event has been triggered when waiting on multiple event types.

public GetEventType ( UInt32 &EventType ) : FT_STATUS
EventType	System.UInt32	The type of event that has occurred.
Результат	FT_STATUS

GetLatency() публичный Метод

Gets the value of the latency timer. Default value is 16ms.

public GetLatency ( byte &Latency ) : FT_STATUS
Latency	byte	The latency timer value in ms.
Результат	FT_STATUS

GetLibraryVersion() публичный Метод

Gets the current FTD2XX.DLL driver version number.

public GetLibraryVersion ( UInt32 &LibraryVersion ) : FT_STATUS
LibraryVersion	System.UInt32	The current library version.
Результат	FT_STATUS

GetLineStatus() публичный Метод

Gets the current line status.

public GetLineStatus ( byte &LineStatus ) : FT_STATUS
LineStatus	byte	A bit map representaion of the current line status.
Результат	FT_STATUS

GetModemStatus() публичный Метод

Gets the current modem status.

public GetModemStatus ( byte &ModemStatus ) : FT_STATUS
ModemStatus	byte	A bit map representaion of the current modem status.
Результат	FT_STATUS

GetNumberOfDevices() публичный Метод

Gets the number of FTDI devices available.

public GetNumberOfDevices ( UInt32 &devcount ) : FT_STATUS
devcount	System.UInt32	The number of FTDI devices available.
Результат	FT_STATUS

GetPinStates() публичный Метод

Gets the instantaneous state of the device IO pins.

public GetPinStates ( byte &BitMode ) : FT_STATUS
BitMode	byte	A bitmap value containing the instantaneous state of the device IO pins
Результат	FT_STATUS

GetRxBytesAvailable() публичный Метод

Gets the number of bytes available in the receive buffer.

public GetRxBytesAvailable ( UInt32 &RxQueue ) : FT_STATUS
RxQueue	System.UInt32	The number of bytes available to be read.
Результат	FT_STATUS

GetSerialNumber() публичный Метод

Gets the serial number of the current device.

public GetSerialNumber ( string &SerialNumber ) : FT_STATUS
SerialNumber	string	The serial number of the current device.
Результат	FT_STATUS

GetTxBytesWaiting() публичный Метод

Gets the number of bytes waiting in the transmit buffer.

public GetTxBytesWaiting ( UInt32 &TxQueue ) : FT_STATUS
TxQueue	System.UInt32	The number of bytes waiting to be sent.
Результат	FT_STATUS

InTransferSize() публичный Метод

Sets the USB IN and OUT transfer sizes.

public InTransferSize ( UInt32 InTransferSize ) : FT_STATUS
InTransferSize	System.UInt32	The USB IN transfer size in bytes.
Результат	FT_STATUS

OpenByDescription() публичный Метод

Opens the FTDI device with the specified description.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

public OpenByDescription ( string description ) : FT_STATUS
description	string	Description of the device to open.
Результат	FT_STATUS

OpenByIndex() публичный Метод

Opens the FTDI device with the specified index.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

public OpenByIndex ( UInt32 index ) : FT_STATUS
index	System.UInt32	Index of the device to open. /// Note that this cannot be guaranteed to open a specific device.
Результат	FT_STATUS

OpenByLocation() публичный Метод

Opens the FTDI device at the specified physical location.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

public OpenByLocation ( UInt32 location ) : FT_STATUS
location	System.UInt32	Location of the device to open.
Результат	FT_STATUS

OpenBySerialNumber() публичный Метод

Opens the FTDI device with the specified serial number.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

public OpenBySerialNumber ( string serialnumber ) : FT_STATUS
serialnumber	string	Serial number of the device to open.
Результат	FT_STATUS

Purge() публичный Метод

Purge data from the devices transmit and/or receive buffers.

public Purge ( UInt32 purgemask ) : FT_STATUS
purgemask	System.UInt32	Specifies which buffer(s) to be purged. Valid values are any combination of the following flags: FT_PURGE_RX, FT_PURGE_TX
Результат	FT_STATUS

Read() публичный Метод

Read data from an open FTDI device.

public Read ( byte dataBuffer, UInt32 numBytesToRead, UInt32 &numBytesRead ) : FT_STATUS
dataBuffer	byte	An array of bytes which will be populated with the data read from the device.
numBytesToRead	System.UInt32	The number of bytes requested from the device.
numBytesRead	System.UInt32	The number of bytes actually read.
Результат	FT_STATUS

Read() публичный Метод

Read data from an open FTDI device.

public Read ( string &dataBuffer, UInt32 numBytesToRead, UInt32 &numBytesRead ) : FT_STATUS
dataBuffer	string	A string containing the data read
numBytesToRead	System.UInt32	The number of bytes requested from the device.
numBytesRead	System.UInt32	The number of bytes actually read.
Результат	FT_STATUS

ReadEEPROMLocation() публичный Метод

Reads an individual word value from a specified location in the device's EEPROM.

public ReadEEPROMLocation ( UInt32 Address, UInt16 &EEValue ) : FT_STATUS
Address	System.UInt32	The EEPROM location to read data from
EEValue	System.UInt16	The WORD value read from the EEPROM location specified in the Address paramter
Результат	FT_STATUS

ReadFT2232EEPROM() публичный Метод

Reads the EEPROM contents of an FT2232 device.

Thrown when the current device does not match the type required by this method.

public ReadFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 ) : FT_STATUS
ee2232	FT2232_EEPROM_STRUCTURE	An FT2232_EEPROM_STRUCTURE which contains only the relevant information for an FT2232 device.
Результат	FT_STATUS

ReadFT2232HEEPROM() публичный Метод

Reads the EEPROM contents of an FT2232H device.

Thrown when the current device does not match the type required by this method.

public ReadFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h ) : FT_STATUS
ee2232h	FT2232H_EEPROM_STRUCTURE	An FT2232H_EEPROM_STRUCTURE which contains only the relevant information for an FT2232H device.
Результат	FT_STATUS

ReadFT232BEEPROM() публичный Метод

Reads the EEPROM contents of an FT232B or FT245B device.

Thrown when the current device does not match the type required by this method.

public ReadFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b ) : FT_STATUS
ee232b	FT232B_EEPROM_STRUCTURE	An FT232B_EEPROM_STRUCTURE which contains only the relevant information for an FT232B and FT245B device.
Результат	FT_STATUS

ReadFT232HEEPROM() публичный Метод

Reads the EEPROM contents of an FT232H device.

Thrown when the current device does not match the type required by this method.

public ReadFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h ) : FT_STATUS
ee232h	FT232H_EEPROM_STRUCTURE	An FT232H_EEPROM_STRUCTURE which contains only the relevant information for an FT232H device.
Результат	FT_STATUS

ReadFT232REEPROM() публичный Метод

Reads the EEPROM contents of an FT232R or FT245R device. Calls FT_EE_Read in FTD2XX DLL

Thrown when the current device does not match the type required by this method.

public ReadFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r ) : FT_STATUS
ee232r	FT232R_EEPROM_STRUCTURE
Результат	FT_STATUS

ReadFT4232HEEPROM() публичный Метод

Reads the EEPROM contents of an FT4232H device.

Thrown when the current device does not match the type required by this method.

public ReadFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h ) : FT_STATUS
ee4232h	FT4232H_EEPROM_STRUCTURE	An FT4232H_EEPROM_STRUCTURE which contains only the relevant information for an FT4232H device.
Результат	FT_STATUS

ReadXSeriesEEPROM() публичный Метод

Reads the EEPROM contents of an X-Series device.

Thrown when the current device does not match the type required by this method.

public ReadXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX ) : FT_STATUS
eeX	FT_XSERIES_EEPROM_STRUCTURE	An FT_XSERIES_EEPROM_STRUCTURE which contains only the relevant information for an X-Series device.
Результат	FT_STATUS

Reload() публичный Метод

Forces a reload of the driver for devices with a specific VID and PID combination.

If the VID and PID parameters are 0, the drivers for USB root hubs will be reloaded, causing all USB devices connected to reload their drivers

public Reload ( UInt16 VendorID, UInt16 ProductID ) : FT_STATUS
VendorID	System.UInt16	Vendor ID of the devices to have the driver reloaded
ProductID	System.UInt16	Product ID of the devices to have the driver reloaded
Результат	FT_STATUS

Rescan() публичный Метод

Causes the system to check for USB hardware changes. This is equivalent to clicking on the "Scan for hardware changes" button in the Device Manager.

public Rescan ( ) : FT_STATUS
Результат	FT_STATUS

ResetDevice() публичный Метод

Reset an open FTDI device.

public ResetDevice ( ) : FT_STATUS
Результат	FT_STATUS

ResetPort() публичный Метод

Resets the device port.

public ResetPort ( ) : FT_STATUS
Результат	FT_STATUS

RestartInTask() публичный Метод

Resumes the driver issuing USB in requests.

public RestartInTask ( ) : FT_STATUS
Результат	FT_STATUS

SetBaudRate() публичный Метод

Sets the current Baud rate.

public SetBaudRate ( UInt32 BaudRate ) : FT_STATUS
BaudRate	System.UInt32	The desired Baud rate for the device.
Результат	FT_STATUS

SetBitMode() публичный Метод

Puts the device in a mode other than the default UART or FIFO mode.

Thrown when the current device does not support the requested bit mode.

public SetBitMode ( byte Mask, byte BitMode ) : FT_STATUS
Mask	byte	Sets up which bits are inputs and which are outputs. A bit value of 0 sets the corresponding pin to an input, a bit value of 1 sets the corresponding pin to an output. /// In the case of CBUS Bit Bang, the upper nibble of this value controls which pins are inputs and outputs, while the lower nibble controls which of the outputs are high and low.
BitMode	byte	For FT232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_CBUS_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL, FT_BIT_MODE_SYNC_FIFO. /// For FT2232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL, FT_BIT_MODE_SYNC_FIFO. /// For FT4232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG. /// For FT232R devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_CBUS_BITBANG. /// For FT245R devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_SYNC_BITBANG. /// For FT2232 devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL. /// For FT232B and FT245B devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG.
Результат	FT_STATUS

SetBreak() публичный Метод

Sets or clears the break state.

public SetBreak ( bool Enable ) : FT_STATUS
Enable	bool	If true, sets break on. If false, sets break off.
Результат	FT_STATUS

SetCharacters() публичный Метод

Sets an event character, an error character and enables or disables them.

public SetCharacters ( byte EventChar, bool EventCharEnable, byte ErrorChar, bool ErrorCharEnable ) : FT_STATUS
EventChar	byte	A character that will be tigger an IN to the host when this character is received.
EventCharEnable	bool	Determines if the EventChar is enabled or disabled.
ErrorChar	byte	A character that will be inserted into the data stream to indicate that an error has occurred.
ErrorCharEnable	bool	Determines if the ErrorChar is enabled or disabled.
Результат	FT_STATUS

SetDTR() публичный Метод

Asserts or de-asserts the Data Terminal Ready (DTR) line.

public SetDTR ( bool Enable ) : FT_STATUS
Enable	bool	If true, asserts DTR. If false, de-asserts DTR.
Результат	FT_STATUS

SetDataCharacteristics() публичный Метод

Sets the data bits, stop bits and parity for the device.

public SetDataCharacteristics ( byte DataBits, byte StopBits, byte Parity ) : FT_STATUS
DataBits	byte	The number of data bits for UART data. Valid values are FT_DATA_BITS.FT_DATA_7 or FT_DATA_BITS.FT_BITS_8
StopBits	byte	The number of stop bits for UART data. Valid values are FT_STOP_BITS.FT_STOP_BITS_1 or FT_STOP_BITS.FT_STOP_BITS_2
Parity	byte	The parity of the UART data. Valid values are FT_PARITY.FT_PARITY_NONE, FT_PARITY.FT_PARITY_ODD, FT_PARITY.FT_PARITY_EVEN, FT_PARITY.FT_PARITY_MARK or FT_PARITY.FT_PARITY_SPACE
Результат	FT_STATUS

SetDeadmanTimeout() публичный Метод

Sets the USB deadman timeout value. Default is 5000ms.

public SetDeadmanTimeout ( UInt32 DeadmanTimeout ) : FT_STATUS
DeadmanTimeout	System.UInt32	The deadman timeout value in ms. Default is 5000ms.
Результат	FT_STATUS

SetEventNotification() публичный Метод

After setting event notification, the event can be caught by executing the WaitOne() method of the EventWaitHandle. If multiple event types are being monitored, the event that fired can be determined from the GetEventType method.

public SetEventNotification ( UInt32 eventmask, EventWaitHandle eventhandle ) : FT_STATUS
eventmask	System.UInt32	The type of events to signal. Can be any combination of the following: FT_EVENT_RXCHAR, FT_EVENT_MODEM_STATUS, FT_EVENT_LINE_STATUS
eventhandle	System.Threading.EventWaitHandle	Handle to the event that will receive the notification
Результат	FT_STATUS

SetFlowControl() публичный Метод

Sets the flow control type.

public SetFlowControl ( UInt16 FlowControl, byte Xon, byte Xoff ) : FT_STATUS
FlowControl	System.UInt16	The type of flow control for the UART. Valid values are FT_FLOW_CONTROL.FT_FLOW_NONE, FT_FLOW_CONTROL.FT_FLOW_RTS_CTS, FT_FLOW_CONTROL.FT_FLOW_DTR_DSR or FT_FLOW_CONTROL.FT_FLOW_XON_XOFF
Xon	byte	The Xon character for Xon/Xoff flow control. Ignored if not using Xon/XOff flow control.
Xoff	byte	The Xoff character for Xon/Xoff flow control. Ignored if not using Xon/XOff flow control.
Результат	FT_STATUS

SetLatency() публичный Метод

Sets the value of the latency timer. Default value is 16ms.

public SetLatency ( byte Latency ) : FT_STATUS
Latency	byte	The latency timer value in ms. /// Valid values are 2ms - 255ms for FT232BM, FT245BM and FT2232 devices. /// Valid values are 0ms - 255ms for other devices.
Результат	FT_STATUS

SetRTS() публичный Метод

Asserts or de-asserts the Request To Send (RTS) line.

public SetRTS ( bool Enable ) : FT_STATUS
Enable	bool	If true, asserts RTS. If false, de-asserts RTS
Результат	FT_STATUS

SetResetPipeRetryCount() публичный Метод

Gets or sets the reset pipe retry count. Default value is 50.

public SetResetPipeRetryCount ( UInt32 ResetPipeRetryCount ) : FT_STATUS
ResetPipeRetryCount	System.UInt32	The reset pipe retry count. /// Electrically noisy environments may benefit from a larger value.
Результат	FT_STATUS

SetTimeouts() публичный Метод

Sets the read and write timeout values.

public SetTimeouts ( UInt32 ReadTimeout, UInt32 WriteTimeout ) : FT_STATUS
ReadTimeout	System.UInt32	Read timeout value in ms. A value of 0 indicates an infinite timeout.
WriteTimeout	System.UInt32	Write timeout value in ms. A value of 0 indicates an infinite timeout.
Результат	FT_STATUS

StopInTask() публичный Метод

Stops the driver issuing USB in requests.

public StopInTask ( ) : FT_STATUS
Результат	FT_STATUS

Write() публичный Метод

Write data to an open FTDI device.

public Write ( byte dataBuffer, Int32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS
dataBuffer	byte	An array of bytes which contains the data to be written to the device.
numBytesToWrite	System.Int32	The number of bytes to be written to the device.
numBytesWritten	System.UInt32	The number of bytes actually written to the device.
Результат	FT_STATUS

Write() публичный Метод

Write data to an open FTDI device.

public Write ( byte dataBuffer, UInt32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS
dataBuffer	byte	An array of bytes which contains the data to be written to the device.
numBytesToWrite	System.UInt32	The number of bytes to be written to the device.
numBytesWritten	System.UInt32	The number of bytes actually written to the device.
Результат	FT_STATUS

Write() публичный Метод

Write data to an open FTDI device.

public Write ( string dataBuffer, Int32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS
dataBuffer	string	A string which contains the data to be written to the device.
numBytesToWrite	System.Int32	The number of bytes to be written to the device.
numBytesWritten	System.UInt32	The number of bytes actually written to the device.
Результат	FT_STATUS

Write() публичный Метод

Write data to an open FTDI device.

public Write ( string dataBuffer, UInt32 numBytesToWrite, UInt32 &numBytesWritten ) : FT_STATUS
dataBuffer	string	A string which contains the data to be written to the device.
numBytesToWrite	System.UInt32	The number of bytes to be written to the device.
numBytesWritten	System.UInt32	The number of bytes actually written to the device.
Результат	FT_STATUS

WriteEEPROMLocation() публичный Метод

Writes an individual word value to a specified location in the device's EEPROM.

public WriteEEPROMLocation ( UInt32 Address, UInt16 EEValue ) : FT_STATUS
Address	System.UInt32	The EEPROM location to read data from
EEValue	System.UInt16	The WORD value to write to the EEPROM location specified by the Address parameter
Результат	FT_STATUS

WriteFT2232EEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT2232 device. Calls FT_EE_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 ) : FT_STATUS
ee2232	FT2232_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteFT2232HEEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT2232H device. Calls FT_EE_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h ) : FT_STATUS
ee2232h	FT2232H_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteFT232BEEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT232B or FT245B device.

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b ) : FT_STATUS
ee232b	FT232B_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteFT232HEEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT232H device. Calls FT_EE_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h ) : FT_STATUS
ee232h	FT232H_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteFT232REEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT232R or FT245R device. Calls FT_EE_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r ) : FT_STATUS
ee232r	FT232R_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteFT4232HEEPROM() публичный Метод

Writes the specified values to the EEPROM of an FT4232H device. Calls FT_EE_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h ) : FT_STATUS
ee4232h	FT4232H_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS

WriteXSeriesEEPROM() публичный Метод

Writes the specified values to the EEPROM of an X-Series device. Calls FT_EEPROM_Program in FTD2XX DLL

If the strings are too long, they will be truncated to their maximum permitted lengths

Thrown when the current device does not match the type required by this method.

public WriteXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX ) : FT_STATUS
eeX	FT_XSERIES_EEPROM_STRUCTURE	The EEPROM settings to be written to the device
Результат	FT_STATUS