C# Класс BytesRoad.Net.Sockets.SocketEx

Provide methods for TCP/IP communication through the various types of proxies.

SocketEx class built on top of the System.Net.Sockets.Socket class provided by the .NET Framework. The main advantages of the SocketEx class is that it might be used to communicate with the peer host through the various types of proxies. Thus giving your application the simple way to add so called 'firewall friendly features'.

Following proxy servers are supported: Socks4 Socks4a Socks5, username/password authentication method supported Web proxy (HTTP CONNECT method), basic authentication method supported

Наследование: IDisposable

Показать файл Открыть проект Примеры использования класса

Private Properties

Свойство	Тип	Описание
BeginTimeoutOp	object
CheckDisposed	void
DoTimeoutOp	object
EndTimeoutOp	object
GetTimeoutValue	int
Init	void
OnTimer	void
SetReceiveTimeout	void
SetSendTimeout	void
SetTimeout	void
SocketEx	System
StartTimeoutTrack	void
StopTimeoutTrack	void

Открытые методы

Метод	Описание
Accept ( ) : SocketEx	Creates the new instance of the BytesRoad.Net.Sockets.SocketEx class which represents newly created connection. Accept method accept incoming connection and create new instance of the SocketEx class for it. The SocketEx should be bound before calling this method thus you need to call BytesRoad.Net.Sockets.SocketEx.Bind and BytesRoad.Net.Sockets.SocketEx.Listen methods first (or their asynchronous versions). Web proxy doesn't able to accept incoming connection. So calling this method on the instance of the SocketEx class which is configured to work with the web proxy server (BytesRoad.Net.Sockets.ProxyType.HttpConnect proxy type) will throw the System.InvalidOperationException exception.
BeginAccept ( AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous operation to accept an incoming connection attempt. BeginAccept method asynchronously accept incoming connection and create new instance of the SocketEx class for it. The SocketEx should be bound before calling this method thus you need to call BytesRoad.Net.Sockets.SocketEx.Bind and BytesRoad.Net.Sockets.SocketEx.Listen methods first (or their asynchronous versions). Web proxy doesn't able to accept incoming connection. So calling this method on the instance of the SocketEx class which is configured to work with the web proxy server (BytesRoad.Net.Sockets.ProxyType.HttpConnect proxy type) will throw the System.InvalidOperationException exception.
BeginBind ( SocketEx socket, AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous binding. The BeginBind method starts an asynchronous binding request. It returns immediately and does not wait for the asynchronous call to complete. The BytesRoad.Net.Sockets.SocketEx.EndBind method is used to retrieve the results of the asynchronous call. It can be called any time after BeginBind; if the asynchronous call has not completed, EndBind will block until it completes. The behavior of the BeginBind method depends on the proxy type specified while instance of the SocketEx class constructed. Table below represents the behavior of the method for different types of proxy server. Type of proxy server Behavior of the BeginBind method BytesRoad.Net.Sockets.ProxyType.None The socket will be bound locally to the same IP address as the instance of the SocketEx class specified by socket parameter. BytesRoad.Net.Sockets.ProxyType.HttpConnect Web proxy not support binding command. The System.InvalidOperationException would be thrown. BytesRoad.Net.Sockets.ProxyType.Socks4 -or- BytesRoad.Net.Sockets.ProxyType.Socks4a -or- BytesRoad.Net.Sockets.ProxyType.Socks5 The socket will be bound at the proxy server. Port and IP address may be retrieved via BytesRoad.Net.Sockets.SocketEx.LocalEndPoint property. An instance specified by socket parameter must be connected with the remote host through physically the same proxy server as the instance of the SocketEx class on which BeginBind method are called.
BeginConnect ( EndPoint remoteEP, AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous connection to the remote host by using specified instance of the System.Net.EndPoint class. The BeginConnect method starts an asynchronous request for a remote host connection. It returns immediately and does not wait for the asynchronous call to complete. The BytesRoad.Net.Sockets.SocketEx.EndConnect method is used to retrieve the results of the asynchronous call. It can be called any time after BeginConnect; if the asynchronous call has not completed, EndConnect will block until it completes.
BeginConnect ( string hostName, int port, AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous connection to the remote host by using host name and port number specified. The BeginConnect method starts an asynchronous request for a remote host connection. It returns immediately and does not wait for the asynchronous call to complete. The BytesRoad.Net.Sockets.SocketEx.EndConnect method is used to retrieve the results of the asynchronous call. It can be called any time after BeginConnect; if the asynchronous call has not completed, EndConnect will block until it completes.
BeginReceive ( byte buffer, int offset, int size, AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous receive operation. The BeginReceive method starts an asynchronous receive operation. It returns immediately and does not wait for the asynchronous call to complete. The BytesRoad.Net.Sockets.SocketEx.EndReceive method is used to retrieve the results of the asynchronous call. It can be called any time after BeginReceive; if the asynchronous call has not completed, EndReceive will block until it completes. The receive operation will not completed until the data is available for reading or error occurs. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation.
BeginSend ( byte buffer, int offset, int size, AsyncCallback callback, object state ) : IAsyncResult	Begins an asynchronous send operation. The BeginSend method starts an asynchronous send operation. It returns immediately and does not wait for the asynchronous call to complete. The BytesRoad.Net.Sockets.SocketEx.EndSend method is used to retrieve the results of the asynchronous call. It can be called any time after BeginSend; if the asynchronous call has not completed, EndSend will block until it completes. Send operation will not completed until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the send operation means that the underlying system has had room to buffer your data for a network send.
Bind ( SocketEx socket ) : void	Associates a BytesRoad.Net.Sockets.SocketEx with local end point at the proxy server. The behavior of the Bind method depends on the proxy type specified while instance of the SocketEx class constructed. Table below represents the behavior of the method for different types of proxy server. Type of proxy server Behavior of the Bind method BytesRoad.Net.Sockets.ProxyType.None The socket will be bound locally to the same IP address as the instance of the SocketEx class specified by socket parameter. BytesRoad.Net.Sockets.ProxyType.HttpConnect Web proxy not support binding command. The System.InvalidOperationException would be thrown. BytesRoad.Net.Sockets.ProxyType.Socks4 -or- BytesRoad.Net.Sockets.ProxyType.Socks4a -or- BytesRoad.Net.Sockets.ProxyType.Socks5 The socket will be bound at the proxy server. Port and IP address may be retrieved via BytesRoad.Net.Sockets.SocketEx.LocalEndPoint property. An instance specified by socket parameter must be connected with the remote host through physically the same proxy server as the instance of the SocketEx class on which Bind method are called.
Close ( ) : void	Releases the resources used by the BytesRoad.Net.Sockets.SocketEx. Internally simply calls BytesRoad.Net.Sockets.SocketEx.Dispose.
Connect ( EndPoint remoteEP ) : void	Establishes a connection to a remote host by using specified instance of the System.Net.EndPoint class. Connect method will block until the connection with remote host is established or error occurs.
Connect ( string hostName, int hostPort ) : void	Establishes a connection to a remote host by using host name and port number specified. Connect method will block until the connection with remote host is established or error occurs.
Dispose ( ) : void	Releases all resources used by the BytesRoad.Net.Sockets.SocketEx. Call Dispose when you are finished using the BytesRoad.Net.Sockets.SocketEx. The Dispose method leaves the SocketEx in an unusable state. After calling Dispose, you must release all references to the SocketEx so the garbage collector can reclaim the memory that the SocketEx was occupying.
EndAccept ( IAsyncResult asyncResult ) : SocketEx	Completes the asynchronous operation to accept incoming connection.
EndBind ( IAsyncResult asyncResult ) : void	Ends asynchronous binding. EndBind is a blocking method that completes the asynchronous binding operation started in BytesRoad.Net.Sockets.SocketEx.BeginBind.
EndConnect ( IAsyncResult asyncResult ) : void	Completes the asynchronous connect to remote host. EndConnect is a blocking method that completes the asynchronous connection to remote host started in the BytesRoad.Net.Sockets.SocketEx.BeginConnect method.
EndReceive ( IAsyncResult asyncResult ) : int	Ends a pending asynchronous receive. EndReceive is a blocking method that completes the asynchronous receive operation started in the BytesRoad.Net.Sockets.SocketEx.BeginReceive method. The EndReceive method will read as much data as is available up to the number of bytes you specified in the size parameter of the BytesRoad.Net.Sockets.SocketEx.BeginReceive method. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the EndReceive method will complete immediately and return zero bytes.
EndSend ( IAsyncResult asyncResult ) : int	Ends a pending asynchronous send. EndSend is a blocking method that completes the asynchronous send operation started in the BytesRoad.Net.Sockets.SocketEx.BeginSend method. EndSend will block until the requested number of bytes are sent. There is no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the EndSend method means that the underlying system has had room to buffer your data for a network send.
Listen ( int backlog ) : void	Places a BytesRoad.Net.Sockets.SocketEx in a listening state. Listen causes BytesRoad.Net.Sockets.SocketEx to listen for incoming connection attempts. The backlog parameter specifies the number of incoming connections that can be queued for acceptance. Listen function is meaningful only when called on instance of the BytesRoad.Net.Sockets.SocketEx class which configured not to use any type of proxy servers. That is BytesRoad.Net.Sockets.SocketEx.ProxyType property equals to BytesRoad.Net.Sockets.ProxyType.None.
Receive ( byte buffer ) : int	Receives data from the remote host and store it in the specified buffer. If no data is available for reading, the Receive method will block until data is available. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation. The Receive method will read as much data as is available, up to the size of the buffer. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the Receive method will complete immediately and return zero bytes.
Receive ( byte buffer, int size ) : int	Receives specified amount of data from the remote host and store it in the supplied buffer. If no data is available for reading, the Receive method will block until data is available. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation. The Receive method will read as much data as is available, up to the size of the buffer. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the Receive method will complete immediately and return zero bytes.
Receive ( byte buffer, int offset, int size ) : int	Receives specified amount of data from the remote host and store it starting from the specified offset in the supplied buffer. If no data is available for reading, the Receive method will block until data is available. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation. The Receive method will read as much data as is available, up to the size of the buffer. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the Receive method will complete immediately and return zero bytes.
Send ( byte buffer ) : int	Sends all data from the specified buffer to the remote host. Send will block until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the Send method means that the underlying system has had room to buffer your data for a network send.
Send ( byte buffer, int size ) : int	Sends specified amount of data to the remote host. Send will block until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the Send method means that the underlying system has had room to buffer your data for a network send.
Send ( byte buffer, int offset, int size ) : int	Sends specified amount of data starting from the specified position in the supplied buffer to the remote host. Send will block until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the Send method means that the underlying system has had room to buffer your data for a network send.
Shutdown ( SocketShutdown how ) : void	Disables sends and receives. Calls System.Net.Sockets.Socket.Shutdown method on a socket which is used in underlying layer for communication with proxy server.
SocketEx ( ) : System	Initializes new instance of the BytesRoad.Net.Sockets.SocketEx class for direct connection. With this constructor the instance of the BytesRoad.Net.Sockets.SocketEx class would be connected to remote host directly. To force connection through the proxy server you need to use other constructor.
SocketEx ( ProxyType proxyType, string proxyServer, int proxyPort, byte proxyUser, byte proxyPassword ) : System	Initializes new instance of the BytesRoad.Net.Sockets.SocketEx class for direct connection or connection through the proxy servers. If proxy server doesn't support anonymous users and the proxyUser parameter equals to null (Nothing in Visual Basic) then the BytesRoad.Net.Sockets.SocketEx.Connect method will fail.

Защищенные методы

Метод	Описание
Dispose ( bool disposing ) : void	Releases the unmanaged resources used by the BytesRoad.Net.Sockets.SocketEx and optionally releases the managed resources. This method is called by the public Dispose() method and the Finalize method. Dispose() invokes the protected Dispose(Boolean) method with the disposing parameter set to true. Finalize invokes Dispose with disposing set to false. When the disposing parameter is true, this method releases all resources held by any managed objects that this SocketEx references. This method invokes the Dispose() method of each referenced object.

Приватные методы

Метод	Описание
BeginTimeoutOp ( int timeout, IOp op, AsyncCallback cb, object state ) : object
CheckDisposed ( ) : void
DoTimeoutOp ( int timeout, IOp op ) : object
EndTimeoutOp ( IOp op, IAsyncResult ar ) : object
GetTimeoutValue ( int val, string propName ) : int
Init ( ) : void
OnTimer ( object state ) : void
SetReceiveTimeout ( int timeout ) : void
SetSendTimeout ( int timeout ) : void
SetTimeout ( int timeout ) : void
SocketEx ( SocketBase baseSocket ) : System	Used in Accept methods
StartTimeoutTrack ( int timeout ) : void
StopTimeoutTrack ( Exception e ) : void

Описание методов

Accept() публичный Метод

Creates the new instance of the BytesRoad.Net.Sockets.SocketEx class which represents newly created connection.

Accept method accept incoming connection and create new instance of the SocketEx class for it. The SocketEx should be bound before calling this method thus you need to call BytesRoad.Net.Sockets.SocketEx.Bind and BytesRoad.Net.Sockets.SocketEx.Listen methods first (or their asynchronous versions). Web proxy doesn't able to accept incoming connection. So calling this method on the instance of the SocketEx class which is configured to work with the web proxy server (BytesRoad.Net.Sockets.ProxyType.HttpConnect proxy type) will throw the System.InvalidOperationException exception.

/// The object was disposed. /// /// The operation is unsupported. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Accept ( ) : SocketEx
Результат	SocketEx

BeginAccept() публичный Метод

Begins an asynchronous operation to accept an incoming connection attempt.

BeginAccept method asynchronously accept incoming connection and create new instance of the SocketEx class for it. The SocketEx should be bound before calling this method thus you need to call BytesRoad.Net.Sockets.SocketEx.Bind and BytesRoad.Net.Sockets.SocketEx.Listen methods first (or their asynchronous versions). Web proxy doesn't able to accept incoming connection. So calling this method on the instance of the SocketEx class which is configured to work with the web proxy server (BytesRoad.Net.Sockets.ProxyType.HttpConnect proxy type) will throw the System.InvalidOperationException exception.

/// The object was disposed. /// /// The operation is unsupported. ///

public BeginAccept ( AsyncCallback callback, object state ) : IAsyncResult
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

BeginBind() публичный Метод

Begins an asynchronous binding.

The BeginBind method starts an asynchronous binding request. It returns immediately and does not wait for the asynchronous call to complete.

The BytesRoad.Net.Sockets.SocketEx.EndBind method is used to retrieve the results of the asynchronous call. It can be called any time after BeginBind; if the asynchronous call has not completed, EndBind will block until it completes.

The behavior of the BeginBind method depends on the proxy type specified while instance of the SocketEx class constructed. Table below represents the behavior of the method for different types of proxy server. Type of proxy server Behavior of the BeginBind method BytesRoad.Net.Sockets.ProxyType.None The socket will be bound locally to the same IP address as the instance of the SocketEx class specified by socket parameter. BytesRoad.Net.Sockets.ProxyType.HttpConnect Web proxy not support binding command. The System.InvalidOperationException would be thrown. BytesRoad.Net.Sockets.ProxyType.Socks4

-or-

BytesRoad.Net.Sockets.ProxyType.Socks4a

-or-

BytesRoad.Net.Sockets.ProxyType.Socks5 The socket will be bound at the proxy server. Port and IP address may be retrieved via BytesRoad.Net.Sockets.SocketEx.LocalEndPoint property. An instance specified by socket parameter must be connected with the remote host through physically the same proxy server as the instance of the SocketEx class on which BeginBind method are called.

/// The object was disposed. /// /// The operation is unsupported. ///

public BeginBind ( SocketEx socket, AsyncCallback callback, object state ) : IAsyncResult
socket	SocketEx	/// An instance of the /// class which already connected to the remote host through the proxy /// server. See remarks for more details. ///
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

BeginConnect() публичный Метод

Begins an asynchronous connection to the remote host by using specified instance of the System.Net.EndPoint class.

The BeginConnect method starts an asynchronous request for a remote host connection. It returns immediately and does not wait for the asynchronous call to complete.

The BytesRoad.Net.Sockets.SocketEx.EndConnect method is used to retrieve the results of the asynchronous call. It can be called any time after BeginConnect; if the asynchronous call has not completed, EndConnect will block until it completes.

/// The object was disposed. /// /// The remoteEP parameter is null (Nothing in Visual Basic). ///

public BeginConnect ( EndPoint remoteEP, AsyncCallback callback, object state ) : IAsyncResult
remoteEP	System.Net.EndPoint	/// An instance of the class which /// represents remote end point to connect to. ///
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

BeginConnect() публичный Метод

Begins an asynchronous connection to the remote host by using host name and port number specified.

The BeginConnect method starts an asynchronous request for a remote host connection. It returns immediately and does not wait for the asynchronous call to complete.

/// The object was disposed. /// /// The hostName parameter is null (Nothing in Visual Basic). /// /// port is less than MinPort. ///-or- /// port is greater than MaxPort. ///

public BeginConnect ( string hostName, int port, AsyncCallback callback, object state ) : IAsyncResult
hostName	string	The name of the remote host.
port	int	Port number on the remote host.
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

BeginReceive() публичный Метод

Begins an asynchronous receive operation.

The BeginReceive method starts an asynchronous receive operation. It returns immediately and does not wait for the asynchronous call to complete.

The BytesRoad.Net.Sockets.SocketEx.EndReceive method is used to retrieve the results of the asynchronous call. It can be called any time after BeginReceive; if the asynchronous call has not completed, EndReceive will block until it completes.

The receive operation will not completed until the data is available for reading or error occurs. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation.

/// The object was disposed. /// /// buffer is a null reference (Nothing in Visual Basic). /// /// offset is less than 0. /// -or- /// offset is greater than the length of buffer. /// -or- /// size is less than 0. /// -or- /// size is greater than the length of buffer minus /// the value of the offset parameter. ///

public BeginReceive ( byte buffer, int offset, int size, AsyncCallback callback, object state ) : IAsyncResult
buffer	byte	Buffer to store the received data.
offset	int	The location in buffer to store the received data.
size	int	The number of bytes to receive.
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

BeginSend() публичный Метод

Begins an asynchronous send operation.

The BeginSend method starts an asynchronous send operation. It returns immediately and does not wait for the asynchronous call to complete.

The BytesRoad.Net.Sockets.SocketEx.EndSend method is used to retrieve the results of the asynchronous call. It can be called any time after BeginSend; if the asynchronous call has not completed, EndSend will block until it completes.

Send operation will not completed until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the send operation means that the underlying system has had room to buffer your data for a network send.

public BeginSend ( byte buffer, int offset, int size, AsyncCallback callback, object state ) : IAsyncResult
buffer	byte	Data to send.
offset	int	The position in the data buffer at which to begin sending data.
size	int	The number of bytes to send.
callback	AsyncCallback	/// The AsyncCallback delegate. ///
state	object	/// An object containing state information for this request. ///
Результат	IAsyncResult

Bind() публичный Метод

Associates a BytesRoad.Net.Sockets.SocketEx with local end point at the proxy server.

The behavior of the Bind method depends on the proxy type specified while instance of the SocketEx class constructed. Table below represents the behavior of the method for different types of proxy server. Type of proxy server Behavior of the Bind method BytesRoad.Net.Sockets.ProxyType.None The socket will be bound locally to the same IP address as the instance of the SocketEx class specified by socket parameter. BytesRoad.Net.Sockets.ProxyType.HttpConnect Web proxy not support binding command. The System.InvalidOperationException would be thrown. BytesRoad.Net.Sockets.ProxyType.Socks4

-or-

BytesRoad.Net.Sockets.ProxyType.Socks4a

-or-

/// The object was disposed. /// /// The operation is unsupported. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Bind ( SocketEx socket ) : void
socket	SocketEx	/// An instance of the /// class which already connected to the remote host through the proxy /// server. See remarks for more details. ///
Результат	void

Close() публичный Метод

Releases the resources used by the BytesRoad.Net.Sockets.SocketEx.

Internally simply calls BytesRoad.Net.Sockets.SocketEx.Dispose.

public Close ( ) : void
Результат	void

Connect() публичный Метод

Establishes a connection to a remote host by using specified instance of the System.Net.EndPoint class.

Connect method will block until the connection with remote host is established or error occurs.

/// The object was disposed. /// /// The remoteEP parameter is null (Nothing in Visual Basic). /// /// An error occurred when attempting to access /// the socket used to complete requested operation. ///

public Connect ( EndPoint remoteEP ) : void
remoteEP	System.Net.EndPoint	/// An instance of the class which /// represents remote end point to connect to. ///
Результат	void

Connect() публичный Метод

Establishes a connection to a remote host by using host name and port number specified.

Connect method will block until the connection with remote host is established or error occurs.

/// The object was disposed. /// /// The hostName parameter is null (Nothing in Visual Basic). /// /// port is less than MinPort. ///-or- /// port is greater than MaxPort. /// /// An error occurred when attempting to access /// the socket used to complete requested operation. ///

public Connect ( string hostName, int hostPort ) : void
hostName	string	/// The name of the remote host. ///
hostPort	int	/// The port number on the remote host. ///
Результат	void

Dispose() публичный Метод

Releases all resources used by the BytesRoad.Net.Sockets.SocketEx.

Call Dispose when you are finished using the BytesRoad.Net.Sockets.SocketEx. The Dispose method leaves the SocketEx in an unusable state. After calling Dispose, you must release all references to the SocketEx so the garbage collector can reclaim the memory that the SocketEx was occupying.

public Dispose ( ) : void
Результат	void

Dispose() защищенный Метод

Releases the unmanaged resources used by the BytesRoad.Net.Sockets.SocketEx and optionally releases the managed resources.

This method is called by the public Dispose() method and the Finalize method. Dispose() invokes the protected Dispose(Boolean) method with the disposing parameter set to true. Finalize invokes Dispose with disposing set to false. When the disposing parameter is true, this method releases all resources held by any managed objects that this SocketEx references. This method invokes the Dispose() method of each referenced object.

protected Dispose ( bool disposing ) : void
disposing	bool	/// true to release both managed and unmanaged resources; /// false to release only unmanaged resources. ///
Результат	void

EndAccept() публичный Метод

Completes the asynchronous operation to accept incoming connection.

/// The object was disposed. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public EndAccept ( IAsyncResult asyncResult ) : SocketEx
asyncResult	IAsyncResult	/// An /// IAsyncResult /// that stores state information for /// this asynchronous operation. ///
Результат	SocketEx

EndBind() публичный Метод

Ends asynchronous binding.

EndBind is a blocking method that completes the asynchronous binding operation started in BytesRoad.Net.Sockets.SocketEx.BeginBind.

/// The object was disposed. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public EndBind ( IAsyncResult asyncResult ) : void
asyncResult	IAsyncResult	/// An /// IAsyncResult /// that stores state information for /// this asynchronous operation. ///
Результат	void

EndConnect() публичный Метод

Completes the asynchronous connect to remote host.

EndConnect is a blocking method that completes the asynchronous connection to remote host started in the BytesRoad.Net.Sockets.SocketEx.BeginConnect method.

/// The object was disposed. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public EndConnect ( IAsyncResult asyncResult ) : void
asyncResult	IAsyncResult	/// An /// IAsyncResult /// that stores state information for /// this asynchronous operation. ///
Результат	void

EndReceive() публичный Метод

Ends a pending asynchronous receive.

EndReceive is a blocking method that completes the asynchronous receive operation started in the BytesRoad.Net.Sockets.SocketEx.BeginReceive method. The EndReceive method will read as much data as is available up to the number of bytes you specified in the size parameter of the BytesRoad.Net.Sockets.SocketEx.BeginReceive method. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the EndReceive method will complete immediately and return zero bytes.

/// The object was disposed. /// /// asyncResult is a null reference /// (Nothing in Visual Basic). /// /// asyncResult was not returned by a call to the /// /// method. /// /// EndReceive was previously called for the /// asynchronous receiving. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public EndReceive ( IAsyncResult asyncResult ) : int
asyncResult	IAsyncResult	/// An /// IAsyncResult /// that stores state information for this asynchronous operation. ///
Результат	int

EndSend() публичный Метод

Ends a pending asynchronous send.

EndSend is a blocking method that completes the asynchronous send operation started in the BytesRoad.Net.Sockets.SocketEx.BeginSend method.

EndSend will block until the requested number of bytes are sent. There is no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the EndSend method means that the underlying system has had room to buffer your data for a network send.

/// The object was disposed. /// /// asyncResult is a null reference /// (Nothing in Visual Basic). /// /// asyncResult was not returned by a call to the /// /// method. /// /// EndSend was previously called for the /// asynchronous receiving. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public EndSend ( IAsyncResult asyncResult ) : int
asyncResult	IAsyncResult	/// An /// IAsyncResult /// that stores state information for this asynchronous operation. ///
Результат	int

Listen() публичный Метод

Places a BytesRoad.Net.Sockets.SocketEx in a listening state.

Listen causes BytesRoad.Net.Sockets.SocketEx to listen for incoming connection attempts. The backlog parameter specifies the number of incoming connections that can be queued for acceptance.

Listen function is meaningful only when called on instance of the BytesRoad.Net.Sockets.SocketEx class which configured not to use any type of proxy servers. That is BytesRoad.Net.Sockets.SocketEx.ProxyType property equals to BytesRoad.Net.Sockets.ProxyType.None.

/// The object was disposed. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Listen ( int backlog ) : void
backlog	int	Lenght of the buffer where incoming connections are queued.
Результат	void

Receive() публичный Метод

Receives data from the remote host and store it in the specified buffer.

If no data is available for reading, the Receive method will block until data is available. You can use the BytesRoad.Net.Sockets.SocketEx.Available property to determine if data is available for reading. When BytesRoad.Net.Sockets.SocketEx.Available is non-zero, retry the receive operation.

The Receive method will read as much data as is available, up to the size of the buffer. If the remote host shuts down the BytesRoad.Net.Sockets.SocketEx connection with the BytesRoad.Net.Sockets.SocketEx.Shutdown method, and all available data has been received, the Receive method will complete immediately and return zero bytes.

/// The object was disposed. /// /// buffer is a null reference (Nothing in Visual Basic). /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Receive ( byte buffer ) : int
buffer	byte	/// Buffer to store the received data. ///
Результат	int

Receive() публичный Метод

Receives specified amount of data from the remote host and store it in the supplied buffer.

/// The object was disposed. /// /// buffer is a null reference (Nothing in Visual Basic). /// /// size exceeds the size of buffer. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Receive ( byte buffer, int size ) : int
buffer	byte	Buffer to store the received data.
size	int	The number of bytes to receive.
Результат	int

Receive() публичный Метод

Receives specified amount of data from the remote host and store it starting from the specified offset in the supplied buffer.

public Receive ( byte buffer, int offset, int size ) : int
buffer	byte	Buffer to store the received data.
offset	int	The location in buffer to store the received data.
size	int	The number of bytes to receive.
Результат	int

Send() публичный Метод

Sends all data from the specified buffer to the remote host.

Send will block until all of the bytes in the buffer are sent. There is also no guarantee that the data you send will appear on the network immediately. To increase network efficiency, the underlying system may delay transmission until a significant amount of outgoing data is collected. A successful completion of the Send method means that the underlying system has had room to buffer your data for a network send.

public Send ( byte buffer ) : int
buffer	byte	Data to send.
Результат	int

Send() публичный Метод

Sends specified amount of data to the remote host.

/// The object was disposed. /// /// buffer is a null reference (Nothing in Visual Basic). /// /// size is less than 0 or exceeds the size of buffer. /// /// An error occurred when attempting to access /// the socket which is used to complete the requested operation. ///

public Send ( byte buffer, int size ) : int
buffer	byte	Data to send.
size	int	The number of bytes to send.
Результат	int

Send() публичный Метод

Sends specified amount of data starting from the specified position in the supplied buffer to the remote host.

public Send ( byte buffer, int offset, int size ) : int
buffer	byte	Data to send.
offset	int	The position in the data buffer at which to begin sending data.
size	int	The number of bytes to send.
Результат	int

Shutdown() публичный Метод

Disables sends and receives.

Calls System.Net.Sockets.Socket.Shutdown method on a socket which is used in underlying layer for communication with proxy server.

/// The object was disposed. ///

public Shutdown ( SocketShutdown how ) : void
how	SocketShutdown	/// One of the /// values that specifies the operation that will no longer be allowed. ///
Результат	void

SocketEx() публичный Метод

Initializes new instance of the BytesRoad.Net.Sockets.SocketEx class for direct connection.

With this constructor the instance of the BytesRoad.Net.Sockets.SocketEx class would be connected to remote host directly. To force connection through the proxy server you need to use other constructor.

public SocketEx ( ) : System
Результат	System

SocketEx() публичный Метод

Initializes new instance of the BytesRoad.Net.Sockets.SocketEx class for direct connection or connection through the proxy servers.

If proxy server doesn't support anonymous users and the proxyUser parameter equals to null (Nothing in Visual Basic) then the BytesRoad.Net.Sockets.SocketEx.Connect method will fail.

public SocketEx ( ProxyType proxyType, string proxyServer, int proxyPort, byte proxyUser, byte proxyPassword ) : System
proxyType	ProxyType	/// Specifies the type of the proxy server to /// be used for communication with remote end point. /// One of the values. ///
proxyServer	string	The host name of the proxy server.
proxyPort	int	The port number of the proxy server.
proxyUser	byte	/// The user name which would be used with proxy server /// in authentication procedure. ///
proxyPassword	byte	/// The password which would be used with proxy server /// in authentication procedure. ///
Результат	System