C# 클래스 Jurassic.Compiler.DynamicILGenerator

Represents a generator of CIL bytes.

상속: ILGenerator

파일 보기 프로젝트 열기: paulbartrum/jurassic 1 사용 예제들

공개 메소드들

메소드	설명
Add ( ) : void	Pops two values from the stack, adds them together, then pushes the result to the stack.
BeginCatchBlock ( Type exceptionType ) : void	Begins a catch block. BeginExceptionBlock() must have already been called.
BeginExceptionBlock ( ) : void	Begins a try-catch-finally block.
BeginFaultBlock ( ) : void	Begins a fault block. BeginTryCatchFinallyBlock() must have already been called.
BeginFilterBlock ( ) : void	Begins a filter block. BeginTryCatchFinallyBlock() must have already been called.
BeginFinallyBlock ( ) : void	Begins a finally block. BeginTryCatchFinallyBlock() must have already been called.
BitwiseAnd ( ) : void	Pops two values from the stack, ANDs them together, then pushes the result to the stack.
BitwiseNot ( ) : void	Pops a value from the stack, inverts it, then pushes the result to the stack.
BitwiseOr ( ) : void	Pops two values from the stack, ORs them together, then pushes the result to the stack.
BitwiseXor ( ) : void	Pops two values from the stack, XORs them together, then pushes the result to the stack.
Box ( Type type ) : void	Pops a value from the stack, converts it to an object reference, then pushes it back onto the stack.
Branch ( ILLabel label ) : void	Unconditionally branches to the given label.
BranchIfEqual ( ILLabel label ) : void	Branches to the given label if the two values on the top of the stack are equal.
BranchIfGreaterThan ( ILLabel label ) : void	Branches to the given label if the first value on the stack is greater than the second value on the stack.
BranchIfGreaterThanOrEqual ( ILLabel label ) : void	Branches to the given label if the first value on the stack is greater than or equal to the second value on the stack.
BranchIfGreaterThanOrEqualUnsigned ( ILLabel label ) : void	Branches to the given label if the first value on the stack is greater than or equal to the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.
BranchIfGreaterThanUnsigned ( ILLabel label ) : void	Branches to the given label if the first value on the stack is greater than the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.
BranchIfLessThan ( ILLabel label ) : void	Branches to the given label if the first value on the stack is less than the second value on the stack.
BranchIfLessThanOrEqual ( ILLabel label ) : void	Branches to the given label if the first value on the stack is less than or equal to the second value on the stack.
BranchIfLessThanOrEqualUnsigned ( ILLabel label ) : void	Branches to the given label if the first value on the stack is less than or equal to the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.
BranchIfLessThanUnsigned ( ILLabel label ) : void	Branches to the given label if the first value on the stack is less than the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.
BranchIfNotEqual ( ILLabel label ) : void	Branches to the given label if the two values on the top of the stack are not equal.
BranchIfNotZero ( ILLabel label ) : void	Branches to the given label if the value on the top of the stack is non-zero, true or non-null.
BranchIfZero ( ILLabel label ) : void	Branches to the given label if the value on the top of the stack is zero.
Breakpoint ( ) : void	Triggers a breakpoint in an attached debugger.
CallStatic ( System method ) : void	Pops the method arguments off the stack, calls the given method, then pushes the result to the stack (if there was one). This operation can be used to call instance methods, but virtual overrides will not be called and a null check will not be performed at the callsite.
CallVirtual ( System method ) : void	Pops the method arguments off the stack, calls the given method, then pushes the result to the stack (if there was one). This operation cannot be used to call static methods. Virtual overrides are obeyed and a null check is performed.
CastClass ( Type type ) : void	Pops an object off the stack, checks that the object inherits from or implements the given type, and pushes the object onto the stack if the check was successful or throws an InvalidCastException if the check failed.
CompareEqual ( ) : void	Pops two values from the stack, compares, then pushes `1` if the first argument is equal to the second, or `0` otherwise. Produces `0` if one or both of the arguments are `NaN`.
CompareGreaterThan ( ) : void	Pops two values from the stack, compares, then pushes `1` if the first argument is greater than the second, or `0` otherwise. Produces `0` if one or both of the arguments are `NaN`.
CompareGreaterThanUnsigned ( ) : void	Pops two values from the stack, compares, then pushes `1` if the first argument is greater than the second, or `0` otherwise. Produces `1` if one or both of the arguments are `NaN`. Integers are considered to be unsigned.
CompareLessThan ( ) : void	Pops two values from the stack, compares, then pushes `1` if the first argument is less than the second, or `0` otherwise. Produces `0` if one or both of the arguments are `NaN`.
CompareLessThanUnsigned ( ) : void	Pops two values from the stack, compares, then pushes `1` if the first argument is less than the second, or `0` otherwise. Produces `1` if one or both of the arguments are `NaN`. Integers are considered to be unsigned.
Complete ( ) : void	Emits a return statement and finalizes the generated code. Do not emit any more instructions after calling this method.
ConvertToDouble ( ) : void	Pops a value from the stack, converts it to a double, then pushes it back onto the stack.
ConvertToInt64 ( ) : void	Pops a value from the stack, converts it to a signed 64-bit integer, then pushes it back onto the stack.
ConvertToInteger ( ) : void	Pops a value from the stack, converts it to a signed integer, then pushes it back onto the stack.
ConvertToUnsignedInt64 ( ) : void	Pops a value from the stack, converts it to an unsigned 64-bit integer, then pushes it back onto the stack.
ConvertToUnsignedInteger ( ) : void	Pops a value from the stack, converts it to an unsigned integer, then pushes it back onto the stack.
ConvertUnsignedToDouble ( ) : void	Pops an unsigned integer from the stack, converts it to a double, then pushes it back onto the stack.
CreateLabel ( ) : ILLabel	Creates a label without setting its position.
DeclareVariable ( Type type, string name = null ) : ILLocalVariable	Declares a new local variable.
DefineLabelPosition ( ILLabel label ) : void	Defines the position of the given label.
Divide ( ) : void	Pops two values from the stack, divides the first by the second, then pushes the result to the stack.
Duplicate ( ) : void	Duplicates the value on the top of the stack.
DynamicILGenerator ( System dynamicMethod ) : System	Creates a new DynamicILGenerator instance.
EndExceptionBlock ( ) : void	Ends a try-catch-finally block.
EndFilter ( ) : void	This instruction can be used from within a filter block to indicate whether the exception will be handled. It pops an integer from the stack which should be `0` to continue searching for an exception handler or `1` to use the handler associated with the filter. EndFilter() must be called at the end of a filter block.
EndFinally ( ) : void	This instruction can be used from within a finally block to resume the exception handling process. It is the only valid way of leaving a finally block.
InitObject ( Type type ) : void	Pops a managed or native pointer off the stack and initializes the referenced type with zeros.
IsInstance ( Type type ) : void	Pops an object off the stack, checks that the object inherits from or implements the given type, and pushes either the object (if the check was successful) or `null` (if the check failed) onto the stack.
Leave ( ILLabel label ) : void	Unconditionally branches to the given label. Unlike the regular branch instruction, this instruction can exit out of try, filter and catch blocks.
LoadAddressOfVariable ( ILLocalVariable variable ) : void	Pushes the address of the given variable onto the stack.
LoadArgument ( int argumentIndex ) : void	Pushes the value of the method argument with the given index onto the stack.
LoadArrayElement ( Type type ) : void	Pops the array and index off the stack and pushes the element value onto the stack.
LoadArrayLength ( ) : void	Pops an array off the stack and pushes the length of the array onto the stack.
LoadDouble ( double value ) : void	Pushes a constant value onto the stack.
LoadField ( System field ) : void	Pushes the value of the given field onto the stack.
LoadInt32 ( int value ) : void	Pushes a constant value onto the stack.
LoadInt64 ( long value ) : void	Pushes a 64-bit constant value onto the stack.
LoadNull ( ) : void	Pushes `null` onto the stack.
LoadStaticMethodPointer ( System method ) : void	Pushes a pointer to the native code implementing the given method onto the evaluation stack. The virtual qualifier will be ignored, if present.
LoadString ( string value ) : void	Pushes a constant value onto the stack.
LoadToken ( System method ) : void	Pushes a RuntimeMethodHandle corresponding to the given method onto the evaluation stack.
LoadToken ( Type type ) : void	Pushes a RuntimeTypeHandle corresponding to the given type onto the evaluation stack.
LoadVariable ( ILLocalVariable variable ) : void	Pushes the value of the given variable onto the stack.
LoadVirtualMethodPointer ( System method ) : void	Pushes a pointer to the native code implementing the given method onto the evaluation stack. This method cannot be used to retrieve a pointer to a static method.
MarkSequencePoint ( System document, int startLine, int startColumn, int endLine, int endColumn ) : void	Marks a sequence point in the Microsoft intermediate language (MSIL) stream.
Multiply ( ) : void	Pops two values from the stack, multiplies them together, then pushes the result to the stack.
Negate ( ) : void	Pops a value from the stack, negates it, then pushes it back onto the stack.
NewArray ( Type type ) : void	Pops the size of the array off the stack and pushes a new array of the given type onto the stack.
NewObject ( System constructor ) : void	Pops the constructor arguments off the stack and creates a new instance of the object.
NoOperation ( ) : void	Does nothing.
Pop ( ) : void	Pops the value from the top of the stack.
Remainder ( ) : void	Pops two values from the stack, divides the first by the second, then pushes the remainder to the stack.
Return ( ) : void	Returns from the current method. A value is popped from the stack and used as the return value.
ShiftLeft ( ) : void	Pops two values from the stack, shifts the first to the left, then pushes the result to the stack.
ShiftRight ( ) : void	Pops two values from the stack, shifts the first to the right, then pushes the result to the stack. The sign bit is preserved.
ShiftRightUnsigned ( ) : void	Pops two values from the stack, shifts the first to the right, then pushes the result to the stack. The sign bit is not preserved.
StoreArgument ( int argumentIndex ) : void	Pops a value from the stack and stores it in the method argument with the given index.
StoreArrayElement ( Type type ) : void	Pops the array, index and value off the stack and stores the value in the array.
StoreField ( System field ) : void	Pops a value off the stack and stores it in the given field.
StoreVariable ( ILLocalVariable variable ) : void	Pops the value from the top of the stack and stores it in the given local variable.
Subtract ( ) : void	Pops two values from the stack, subtracts the second from the first, then pushes the result to the stack.
Switch ( ILLabel labels ) : void	Creates a jump table. A value is popped from the stack - this value indicates the index of the label in the labels array to jump to.
Throw ( ) : void	Pops an exception object off the stack and throws the exception.
Unbox ( Type type ) : void	Pops an object reference (representing a boxed value) from the stack, extracts the address, then pushes that address onto the stack.
UnboxAny ( Type type ) : void	Pops an object reference (representing a boxed value) from the stack, extracts the value, then pushes the value onto the stack.

비공개 메소드들

메소드	설명
BeginExceptionBlock ( ExceptionClauseType type ) : void	Begins a finally, filter or fault block.
BranchCore ( ILLabel label, byte opCode ) : void	Unconditionally branches to the given label.
BranchCore ( ILLabel label, byte opCode, ComparisonOperator @operator ) : void	Conditionally branches to the given label, popping two operands from the stack.
BranchCore ( ILLabel label, byte opCode, VESType operandType ) : void	Conditionally branches to the given label, popping one operand from the stack.
CheckArithmeticOperands ( ArithmeticOperator @operator ) : void
CheckComparisonOperands ( ComparisonOperator @operator, bool branchOperation ) : void
ClearEvaluationStack ( ) : void	Removes all values from the evaluation stack.
Emit1ByteOpCode ( byte opCode, int popCount, int pushCount ) : void	Emits a one byte opcode.
Emit1ByteOpCodeInt16 ( byte opCode, int popCount, int pushCount, int emitInt16 ) : void	Emits a one byte opcode plus a 2-byte operand.
Emit1ByteOpCodeInt32 ( byte opCode, int popCount, int pushCount, int emitInt32 ) : void	Emits a one byte opcode plus a 4-byte operand.
Emit1ByteOpCodeInt64 ( byte opCode, int popCount, int pushCount, long emitInt64 ) : void	Emits a one byte opcode plus a 8-byte operand.
Emit1ByteOpCodeInt8 ( byte opCode, int popCount, int pushCount, int emitInt8 ) : void	Emits a one byte opcode plus a 1-byte operand.
Emit2ByteOpCode ( byte opCode1, byte opCode2, int popCount, int pushCount ) : void	Emits a two byte opcode.
Emit2ByteOpCodeInt16 ( byte opCode1, byte opCode2, int popCount, int pushCount, int emitInt16 ) : void	Emits a two byte opcode plus a 2-byte operand.
Emit2ByteOpCodeInt32 ( byte opCode1, byte opCode2, int popCount, int pushCount, int emitInt32 ) : void	Emits a two byte opcode plus a 4-byte operand.
EmitCall ( byte opCode, System method ) : void	Pops the method arguments off the stack, calls the given method, then pushes the result to the stack (if there was one).
EmitInt16 ( int value ) : void	Emits a 16-bit integer and increments the offset member variable.
EmitInt32 ( int value ) : void	Emits a 32-bit integer and increments the offset member variable.
EmitInt64 ( long value ) : void	Emits a 64-bit integer and increments the offset member variable.
EmitLabel ( ILLabel label, int startOfNextInstruction ) : void	Emits a single label.
EndCurrentClause ( ExceptionRegion exceptionRegion ) : void	Closes the currently open exception clause.
EnlargeArray ( int instructionSize ) : void	Enlarges the internal IL buffer.
FixLabels ( ) : void	Patch any undefined labels.
GetToken ( System method ) : int	Gets a metadata token for the given method.
GetToken ( Type type ) : int	Gets a metadata token for the given type.
GetToken ( string str ) : int	Gets a metadata token for the given string.
PopStackOperands ( ) : void
PushStackOperand ( VESType type ) : void
ReplaceEvaluationStack ( ) : void	Removes all values from the evaluation stack and adds the given operand types back.
ToVESType ( Type type ) : VESType	Converts a .NET type into an IL operand type.
UnconditionalBranch ( ) : void	Puts the stack into an indeterminate state.

메소드 상세

Add() 공개 메소드

Pops two values from the stack, adds them together, then pushes the result to the stack.

public Add ( ) : void
리턴	void

BeginCatchBlock() 공개 메소드

Begins a catch block. BeginExceptionBlock() must have already been called.

public BeginCatchBlock ( Type exceptionType ) : void
exceptionType	System.Type	The type of exception to handle.
리턴	void

BeginExceptionBlock() 공개 메소드

Begins a try-catch-finally block.

public BeginExceptionBlock ( ) : void
리턴	void

BeginFaultBlock() 공개 메소드

Begins a fault block. BeginTryCatchFinallyBlock() must have already been called.

public BeginFaultBlock ( ) : void
리턴	void

BeginFilterBlock() 공개 메소드

Begins a filter block. BeginTryCatchFinallyBlock() must have already been called.

public BeginFilterBlock ( ) : void
리턴	void

BeginFinallyBlock() 공개 메소드

Begins a finally block. BeginTryCatchFinallyBlock() must have already been called.

public BeginFinallyBlock ( ) : void
리턴	void

BitwiseAnd() 공개 메소드

Pops two values from the stack, ANDs them together, then pushes the result to the stack.

public BitwiseAnd ( ) : void
리턴	void

BitwiseNot() 공개 메소드

Pops a value from the stack, inverts it, then pushes the result to the stack.

public BitwiseNot ( ) : void
리턴	void

BitwiseOr() 공개 메소드

Pops two values from the stack, ORs them together, then pushes the result to the stack.

public BitwiseOr ( ) : void
리턴	void

BitwiseXor() 공개 메소드

Pops two values from the stack, XORs them together, then pushes the result to the stack.

public BitwiseXor ( ) : void
리턴	void

Box() 공개 메소드

Pops a value from the stack, converts it to an object reference, then pushes it back onto the stack.

public Box ( Type type ) : void
type	System.Type
리턴	void

Branch() 공개 메소드

Unconditionally branches to the given label.

public Branch ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfEqual() 공개 메소드

Branches to the given label if the two values on the top of the stack are equal.

public BranchIfEqual ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfGreaterThan() 공개 메소드

Branches to the given label if the first value on the stack is greater than the second value on the stack.

public BranchIfGreaterThan ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfGreaterThanOrEqual() 공개 메소드

Branches to the given label if the first value on the stack is greater than or equal to the second value on the stack.

public BranchIfGreaterThanOrEqual ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfGreaterThanOrEqualUnsigned() 공개 메소드

Branches to the given label if the first value on the stack is greater than or equal to the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.

public BranchIfGreaterThanOrEqualUnsigned ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfGreaterThanUnsigned() 공개 메소드

Branches to the given label if the first value on the stack is greater than the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.

public BranchIfGreaterThanUnsigned ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfLessThan() 공개 메소드

Branches to the given label if the first value on the stack is less than the second value on the stack.

public BranchIfLessThan ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfLessThanOrEqual() 공개 메소드

Branches to the given label if the first value on the stack is less than or equal to the second value on the stack.

public BranchIfLessThanOrEqual ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfLessThanOrEqualUnsigned() 공개 메소드

Branches to the given label if the first value on the stack is less than or equal to the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.

public BranchIfLessThanOrEqualUnsigned ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfLessThanUnsigned() 공개 메소드

Branches to the given label if the first value on the stack is less than the second value on the stack. If the operands are integers then they are treated as if they are unsigned. If the operands are floating point numbers then a NaN value will trigger a branch.

public BranchIfLessThanUnsigned ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfNotEqual() 공개 메소드

Branches to the given label if the two values on the top of the stack are not equal.

public BranchIfNotEqual ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfNotZero() 공개 메소드

Branches to the given label if the value on the top of the stack is non-zero, true or non-null.

public BranchIfNotZero ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

BranchIfZero() 공개 메소드

Branches to the given label if the value on the top of the stack is zero.

public BranchIfZero ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

Breakpoint() 공개 메소드

Triggers a breakpoint in an attached debugger.

public Breakpoint ( ) : void
리턴	void

CallStatic() 공개 메소드

Pops the method arguments off the stack, calls the given method, then pushes the result to the stack (if there was one). This operation can be used to call instance methods, but virtual overrides will not be called and a null check will not be performed at the callsite.

public CallStatic ( System method ) : void
method	System	The method to call.
리턴	void

CallVirtual() 공개 메소드

Pops the method arguments off the stack, calls the given method, then pushes the result to the stack (if there was one). This operation cannot be used to call static methods. Virtual overrides are obeyed and a null check is performed.

The method is static.

public CallVirtual ( System method ) : void
method	System	The method to call.
리턴	void

CastClass() 공개 메소드

Pops an object off the stack, checks that the object inherits from or implements the given type, and pushes the object onto the stack if the check was successful or throws an InvalidCastException if the check failed.

public CastClass ( Type type ) : void
type	System.Type	The type of the class the object inherits from or the interface the /// object implements.
리턴	void

CompareEqual() 공개 메소드

Pops two values from the stack, compares, then pushes 1 if the first argument is equal to the second, or 0 otherwise. Produces 0 if one or both of the arguments are NaN.

public CompareEqual ( ) : void
리턴	void

CompareGreaterThan() 공개 메소드

Pops two values from the stack, compares, then pushes 1 if the first argument is greater than the second, or 0 otherwise. Produces 0 if one or both of the arguments are NaN.

public CompareGreaterThan ( ) : void
리턴	void

CompareGreaterThanUnsigned() 공개 메소드

Pops two values from the stack, compares, then pushes 1 if the first argument is greater than the second, or 0 otherwise. Produces 1 if one or both of the arguments are NaN. Integers are considered to be unsigned.

public CompareGreaterThanUnsigned ( ) : void
리턴	void

CompareLessThan() 공개 메소드

Pops two values from the stack, compares, then pushes 1 if the first argument is less than the second, or 0 otherwise. Produces 0 if one or both of the arguments are NaN.

public CompareLessThan ( ) : void
리턴	void

CompareLessThanUnsigned() 공개 메소드

Pops two values from the stack, compares, then pushes 1 if the first argument is less than the second, or 0 otherwise. Produces 1 if one or both of the arguments are NaN. Integers are considered to be unsigned.

public CompareLessThanUnsigned ( ) : void
리턴	void

Complete() 공개 메소드

Emits a return statement and finalizes the generated code. Do not emit any more instructions after calling this method.

public Complete ( ) : void
리턴	void

ConvertToDouble() 공개 메소드

Pops a value from the stack, converts it to a double, then pushes it back onto the stack.

public ConvertToDouble ( ) : void
리턴	void

ConvertToInt64() 공개 메소드

Pops a value from the stack, converts it to a signed 64-bit integer, then pushes it back onto the stack.

public ConvertToInt64 ( ) : void
리턴	void

ConvertToInteger() 공개 메소드

Pops a value from the stack, converts it to a signed integer, then pushes it back onto the stack.

public ConvertToInteger ( ) : void
리턴	void

ConvertToUnsignedInt64() 공개 메소드

Pops a value from the stack, converts it to an unsigned 64-bit integer, then pushes it back onto the stack.

public ConvertToUnsignedInt64 ( ) : void
리턴	void

ConvertToUnsignedInteger() 공개 메소드

Pops a value from the stack, converts it to an unsigned integer, then pushes it back onto the stack.

public ConvertToUnsignedInteger ( ) : void
리턴	void

ConvertUnsignedToDouble() 공개 메소드

Pops an unsigned integer from the stack, converts it to a double, then pushes it back onto the stack.

public ConvertUnsignedToDouble ( ) : void
리턴	void

CreateLabel() 공개 메소드

Creates a label without setting its position.

public CreateLabel ( ) : ILLabel
리턴	ILLabel

DeclareVariable() 공개 메소드

Declares a new local variable.

public DeclareVariable ( Type type, string name = null ) : ILLocalVariable
type	System.Type	The type of the local variable.
name	string	The name of the local variable. Can be null.
리턴	ILLocalVariable

DefineLabelPosition() 공개 메소드

Defines the position of the given label.

public DefineLabelPosition ( ILLabel label ) : void
label	ILLabel	The label to define.
리턴	void

Divide() 공개 메소드

Pops two values from the stack, divides the first by the second, then pushes the result to the stack.

public Divide ( ) : void
리턴	void

Duplicate() 공개 메소드

Duplicates the value on the top of the stack.

public Duplicate ( ) : void
리턴	void

DynamicILGenerator() 공개 메소드

Creates a new DynamicILGenerator instance.

public DynamicILGenerator ( System dynamicMethod ) : System
dynamicMethod	System	The dynamic method to generate code for.
리턴	System

EndExceptionBlock() 공개 메소드

Ends a try-catch-finally block.

public EndExceptionBlock ( ) : void
리턴	void

EndFilter() 공개 메소드

This instruction can be used from within a filter block to indicate whether the exception will be handled. It pops an integer from the stack which should be 0 to continue searching for an exception handler or 1 to use the handler associated with the filter. EndFilter() must be called at the end of a filter block.

public EndFilter ( ) : void
리턴	void

EndFinally() 공개 메소드

This instruction can be used from within a finally block to resume the exception handling process. It is the only valid way of leaving a finally block.

public EndFinally ( ) : void
리턴	void

InitObject() 공개 메소드

Pops a managed or native pointer off the stack and initializes the referenced type with zeros.

public InitObject ( Type type ) : void
type	System.Type	The type the pointer on the top of the stack is pointing to.
리턴	void

IsInstance() 공개 메소드

Pops an object off the stack, checks that the object inherits from or implements the given type, and pushes either the object (if the check was successful) or null (if the check failed) onto the stack.

public IsInstance ( Type type ) : void
type	System.Type	The type of the class the object inherits from or the interface the /// object implements.
리턴	void

Leave() 공개 메소드

Unconditionally branches to the given label. Unlike the regular branch instruction, this instruction can exit out of try, filter and catch blocks.

public Leave ( ILLabel label ) : void
label	ILLabel	The label to branch to.
리턴	void

LoadAddressOfVariable() 공개 메소드

Pushes the address of the given variable onto the stack.

public LoadAddressOfVariable ( ILLocalVariable variable ) : void
variable	ILLocalVariable	The variable whose address will be pushed.
리턴	void

LoadArgument() 공개 메소드

Pushes the value of the method argument with the given index onto the stack.

public LoadArgument ( int argumentIndex ) : void
argumentIndex	int	The index of the argument to push onto the stack.
리턴	void

LoadArrayElement() 공개 메소드

Pops the array and index off the stack and pushes the element value onto the stack.

public LoadArrayElement ( Type type ) : void
type	System.Type	The element type.
리턴	void

LoadArrayLength() 공개 메소드

Pops an array off the stack and pushes the length of the array onto the stack.

public LoadArrayLength ( ) : void
리턴	void

LoadDouble() 공개 메소드

Pushes a constant value onto the stack.

public LoadDouble ( double value ) : void
value	double	The number to push onto the stack.
리턴	void

LoadField() 공개 메소드

Pushes the value of the given field onto the stack.

public LoadField ( System field ) : void
field	System	The field whose value will be pushed.
리턴	void

LoadInt32() 공개 메소드

Pushes a constant value onto the stack.

public LoadInt32 ( int value ) : void
value	int	The integer to push onto the stack.
리턴	void

LoadInt64() 공개 메소드

Pushes a 64-bit constant value onto the stack.

public LoadInt64 ( long value ) : void
value	long	The 64-bit integer to push onto the stack.
리턴	void

LoadNull() 공개 메소드

Pushes null onto the stack.

public LoadNull ( ) : void
리턴	void

LoadStaticMethodPointer() 공개 메소드

Pushes a pointer to the native code implementing the given method onto the evaluation stack. The virtual qualifier will be ignored, if present.

public LoadStaticMethodPointer ( System method ) : void
method	System	The method to retrieve a pointer for.
리턴	void

LoadString() 공개 메소드

Pushes a constant value onto the stack.

public LoadString ( string value ) : void
value	string	The string to push onto the stack.
리턴	void

LoadToken() 공개 메소드

Pushes a RuntimeMethodHandle corresponding to the given method onto the evaluation stack.

public LoadToken ( System method ) : void
method	System	The method to convert to a RuntimeMethodHandle.
리턴	void

LoadToken() 공개 메소드

Pushes a RuntimeTypeHandle corresponding to the given type onto the evaluation stack.

public LoadToken ( Type type ) : void
type	System.Type	The type to convert to a RuntimeTypeHandle.
리턴	void

LoadVariable() 공개 메소드

Pushes the value of the given variable onto the stack.

public LoadVariable ( ILLocalVariable variable ) : void
variable	ILLocalVariable	The variable whose value will be pushed.
리턴	void

LoadVirtualMethodPointer() 공개 메소드

Pushes a pointer to the native code implementing the given method onto the evaluation stack. This method cannot be used to retrieve a pointer to a static method.

The method is static.

public LoadVirtualMethodPointer ( System method ) : void
method	System	The method to retrieve a pointer for.
리턴	void

MarkSequencePoint() 공개 메소드

Marks a sequence point in the Microsoft intermediate language (MSIL) stream.

public MarkSequencePoint ( System document, int startLine, int startColumn, int endLine, int endColumn ) : void
document	System	The document for which the sequence point is being defined.
startLine	int	The line where the sequence point begins.
startColumn	int	The column in the line where the sequence point begins.
endLine	int	The line where the sequence point ends.
endColumn	int	The column in the line where the sequence point ends.
리턴	void

Multiply() 공개 메소드

Pops two values from the stack, multiplies them together, then pushes the result to the stack.

public Multiply ( ) : void
리턴	void

Negate() 공개 메소드

Pops a value from the stack, negates it, then pushes it back onto the stack.

public Negate ( ) : void
리턴	void

NewArray() 공개 메소드

Pops the size of the array off the stack and pushes a new array of the given type onto the stack.

public NewArray ( Type type ) : void
type	System.Type	The element type.
리턴	void

NewObject() 공개 메소드

Pops the constructor arguments off the stack and creates a new instance of the object.

public NewObject ( System constructor ) : void
constructor	System	The constructor that is used to initialize the object.
리턴	void

NoOperation() 공개 메소드

Does nothing.

public NoOperation ( ) : void
리턴	void

Pop() 공개 메소드

Pops the value from the top of the stack.

public Pop ( ) : void
리턴	void

Remainder() 공개 메소드

Pops two values from the stack, divides the first by the second, then pushes the remainder to the stack.

public Remainder ( ) : void
리턴	void

Return() 공개 메소드

Returns from the current method. A value is popped from the stack and used as the return value.

public Return ( ) : void
리턴	void

ShiftLeft() 공개 메소드

Pops two values from the stack, shifts the first to the left, then pushes the result to the stack.

public ShiftLeft ( ) : void
리턴	void

ShiftRight() 공개 메소드

Pops two values from the stack, shifts the first to the right, then pushes the result to the stack. The sign bit is preserved.

public ShiftRight ( ) : void
리턴	void

ShiftRightUnsigned() 공개 메소드

Pops two values from the stack, shifts the first to the right, then pushes the result to the stack. The sign bit is not preserved.

public ShiftRightUnsigned ( ) : void
리턴	void

StoreArgument() 공개 메소드

Pops a value from the stack and stores it in the method argument with the given index.

public StoreArgument ( int argumentIndex ) : void
argumentIndex	int	The index of the argument to store into.
리턴	void

StoreArrayElement() 공개 메소드

Pops the array, index and value off the stack and stores the value in the array.

public StoreArrayElement ( Type type ) : void
type	System.Type	The element type.
리턴	void

StoreField() 공개 메소드

Pops a value off the stack and stores it in the given field.

public StoreField ( System field ) : void
field	System	The field to modify.
리턴	void

StoreVariable() 공개 메소드

Pops the value from the top of the stack and stores it in the given local variable.

public StoreVariable ( ILLocalVariable variable ) : void
variable	ILLocalVariable	The variable to store the value.
리턴	void

Subtract() 공개 메소드

Pops two values from the stack, subtracts the second from the first, then pushes the result to the stack.

public Subtract ( ) : void
리턴	void

Switch() 공개 메소드

Creates a jump table. A value is popped from the stack - this value indicates the index of the label in the labels array to jump to.

public Switch ( ILLabel labels ) : void
labels	ILLabel	A array of labels.
리턴	void

Throw() 공개 메소드

Pops an exception object off the stack and throws the exception.

public Throw ( ) : void
리턴	void

Unbox() 공개 메소드

Pops an object reference (representing a boxed value) from the stack, extracts the address, then pushes that address onto the stack.

public Unbox ( Type type ) : void
type	System.Type	The type of the boxed value. This should be a value type.
리턴	void

UnboxAny() 공개 메소드

Pops an object reference (representing a boxed value) from the stack, extracts the value, then pushes the value onto the stack.

public UnboxAny ( Type type ) : void
type	System.Type	The type of the boxed value. This should be a value type.
리턴	void