C# Class _3PA.Npp

This class contains very generic wrappers for basic Notepad++ functionality.

ファイルを表示 Open project: jcaillon/3P Class Usage Examples

Private Properties

Property	Type	Description

Public Methods

Method	Description
AddSelection ( int caret, int anchor ) : void	Adds an additional selection range to the existing main selection. A main selection must first have been set by a call to SetSelection.
AnnotationClearAll ( ) : void	Clear all annotations in one go
AutoCCancel ( ) : void	Cancels any displayed autocompletion list.
AutoCStops ( string chars ) : void	Specifies the characters that will automatically cancel autocompletion without the need to call AutoCCancel. Characters specified should be limited to printable ASCII characters.
BeginUndoAction ( ) : void	Mark the beginning of a set of operations that you want to undo all as one operation but that you have to generate as several operations. Alternatively, you can use these to mark a set of operations that you do not want to have combined with the preceding or following operations if they are undone.
BitmapToArgb ( Bitmap image ) : byte[]
BraceBadLight ( int position ) : void	Styles the specified character position with the Style.BraceBad style when there is an unmatched brace.
BraceHighlight ( int position1, int position2 ) : void	Styles the specified character positions with the Style.BraceLight style. Brace highlighting can be removed by specifying InvalidPosition for position1 and position2.
BraceMatch ( int position ) : int	Finds a corresponding matching brace starting at the position specified. The brace characters handled are '(', ')', '[', ']', '{', '}', '<', and '>'. A match only occurs if the style of the matching brace is the same as the starting brace. Nested braces are handled correctly.
ByteToCharStyles ( byte styles, byte text, int length, Encoding encoding ) : byte[]
CharPositionFromPointClose ( int x, int y ) : int	Finds the closest character position to the specified display point or returns -1 if the point is outside the window or not close to any characters.
CharToByteStyles ( byte styles, byte text, int length, Encoding encoding ) : byte[]
Clamp ( int value, int min, int max ) : int	Forces a value between a minimum and a maximum
ClampMin ( int value, int min ) : int	Forces a value to a minimum
Clear ( ) : void	Removes the selected text from the document.
ClearAll ( ) : void	Deletes all document text, unless the document is read-only.
ClearDocumentStyle ( ) : void	Removes all styling from the document and resets the folding state.
ClearSelections ( ) : void	Sets a single empty selection at the start of the document.
Colorize ( int startPos, int endPos ) : void	Requests that the current lexer restyle the specified range. This will also cause fold levels in the range specified to be reset.
ConvertEols ( Eol eolMode ) : void	Changes all end-of-line characters in the document to the format specified.
Copy ( ) : void	Copies the selected text from the document and places it on the clipboard.
CopyAllowLine ( ) : void	Copies the selected text from the document and places it on the clipboard. If the selection is empty the current line is copied. If the selection is empty and the current line copied, an extra "MSDEVLineSelect" marker is added to the clipboard which is then used in Paste to paste the whole line before the current line.
CopyRange ( int start, int end ) : void	Copies the specified range of text to the clipboard.
Cut ( ) : void	Cuts the selected text from the document and places it on the clipboard.
DeleteTextByRange ( int start, int end ) : void	Deletes the given range of text
DocLineFromVisible ( int displayLine ) : int	Returns the zero-based document line index from the specified display line index.
DropSelection ( int selection ) : void	If there are multiple selections, removes the specified selection.
EndUndoAction ( ) : void	Mark the end of a set of operations that you want to undo all as one operation but that you have to generate as several operations. Alternatively, you can use these to mark a set of operations that you do not want to have combined with the preceding or following operations if they are undone.
ExecuteCmd ( System.Windows.Forms.Command sciCommand ) : void	Performs the specified command
Exit ( ) : void	Leaves npp
FoldAll ( FoldAction action ) : void	Performs the specified fold action on the entire document. When using FoldAction.Toggle the first fold header in the document is examined to decide whether to expand or contract.
GetAblWordAtPosition ( int position ) : string	Returns the ABL word at the given position (read on left and right) (stops at points)
GetBytes ( char text, int length, Encoding encoding, bool zeroTerminated ) : byte[]	Returns char array's bytes array with given encoding
GetBytes ( string text, Encoding encoding, bool zeroTerminated ) : byte[]	Returns a string's bytes array with given encoding
GetCaretScreenLocation ( ) : Point	Gets the current screen location of the caret.
GetColumn ( int position ) : int	Returns the column number of the specified document position, taking the width of tabs into account.
GetConfigDir ( ) : string	Returns the configuration directory path e.g. /plugins/config/{AssemblyProduct}
GetCurrentFileExtension ( ) : string	returns the current file's extension
GetCurrentFileFolder ( ) : string	Returns the current file folder (uses GetDirectoryName)
GetCurrentFileName ( ) : string	Returns the current file base name (uses GetFileName)
GetCurrentFilePath ( ) : string	Gets the path of the current document.
GetEndStyled ( ) : int	Returns the last document position likely to be styled correctly.
GetFirstWordRightAfterPoint ( int curPos ) : string	returns the first keyword right after the point (reading from right to left) it is useful to get a table name when we enter a field, or a database name when we enter a table name, also, if you analyse DATABASE.TABLE.CURFIELD, if returns TABLE and not DATABASE!
GetFocus ( ) : bool	to be tested!!!!
GetIndentString ( ) : string	returns the indent value as a string, can be either a \t or a number of ' '
GetIndicator ( int index ) : Indicator	Returns an indicator object Range of indicator id to use is from 8=INDIC_CONTAINER .. to 31=INDIC_IME-1
GetKeyword ( int curPos = -1 ) : string	Gets the keyword at given position (reading only on the left of the position)
GetLine ( ) : Line	Returns a Line object representing the current line
GetLine ( int index ) : Line	Returns a Line object representing the given line
GetMargin ( int index ) : Margin	Returns a margin object The margins are numbered 0 to 4. Using a margin number outside the valid range has no effect. By default, margin 0 is set to display line numbers, but is given a width of 0, so it is hidden. Margin 1 is set to display non-folding symbols and is given a width of 16 pixels, so it is visible. Margin 2 is set to display the folding symbols, but is given a width of 0, so it is hidden. Of course, you can set the margins to be whatever you wish.
GetMarker ( int index ) : Marker	Returns a marker object There are 32 markers, numbered 0 to MARKER_MAX (31), and you can assign any combination of them to each line in the document Marker numbers 25 to 31 are used by Scintilla in folding margins Marker numbers 0 to 24 have no pre-defined function; you can use them
GetNppDirectory ( ) : string	returns npp's folder path
GetOpenedFiles ( ) : List	Gets the file path of each file currently opened
GetOpenedFilesPrimary ( ) : List	Gets the file path of each file currently opened in the primary view
GetOpenedFilesSecondary ( ) : List	Gets the file path of each file currently opened in the secondary view
GetPointXyFromPosition ( int position ) : Point	returns the x,y point location of the character at the position given
GetPosFromLineColumn ( int line, int column ) : int	This message returns the position of a column on a line taking the width of tabs into account. It treats a multi-byte character as a single column. Column numbers, like lines start at 0.
GetPositionFromMouseLocation ( ) : int	Self explaining
GetScintillaRectangle ( ) : Rectangle	returns a rectangle representing the location and size of the scintilla window
GetSelection ( int index ) : Selection	Returns a selection object
GetSessionFiles ( string sessionFilePath ) : string	Gets the file path of each file in the session file, return the files separated by a new line
GetString ( IntPtr bytes, int length, Encoding encoding ) : string	Get string from pointer
GetStyle ( byte index ) : Style	Returns a style object There are 256 lexer styles that can be set, numbered 0 to STYLE_MAX (255). There are also some predefined numbered styles starting at 32.
GetStyleAt ( int position ) : int	Gets the style of the specified document position.
GetTag ( int tagNumber ) : string	Returns the capture group text of the most recent regular expression search.
GetTextBetween ( Point point ) : string
GetTextByRange ( int start, int end ) : string	Gets a range of text from the document.
GetTextOnLeftOfPos ( int curPos, int maxLenght = KeywordMaxLength ) : string	returns the text on the left of the position... it will always return empty string at minima
GetTextOnRightOfPos ( int curPos, int maxLenght = KeywordMaxLength ) : string	returns the text on the right of the position... it will always return empty string at minima
GetTextRange ( int position, int length ) : string	Gets a range of text from the document.
GoBackFromDefinition ( ) : void	When you use the GoToDefinition method, you stack points of your position before the jump, this method allows you to navigate back to where you were
GoToLine ( int line ) : void	Move the caret and the view to the specified line (lines starts 0!)
Goto ( string document, int line = -1, int column = -1 ) : void	Switch to a document, can be already opended or not
Goto ( string document, int position, int line, int column, bool saveHistoric ) : void	Switch to a document, can be already opended or not, can decide to remember the current position to jump back to it
GotoPos ( string document, int position ) : void	Switch to a document, can be already opended or not
GotoPosition ( int position ) : void	Navigates the caret to the document position specified. Any selection is discarded.
GrabFocus ( ) : void	allows scintilla to grab focus
HideLines ( int lineStart, int lineEnd ) : void	Hides the range of lines specified.
InsertText ( int position, string text ) : void	Inserts text at the specified position. No scrolling is performed.
IsCurrentFileHasExtension ( string extension ) : bool	Determines whether the current file has the specified extension (e.g. ".cs"). Note it is case insensitive.
LineFromPosition ( int position ) : int	Returns the line that contains the document position specified.
LineScroll ( int lines, int columns ) : void	Scrolls the display the number of lines and columns specified. Negative values scroll in the opposite direction. A column is the width in pixels of a space character in the Style.Default style.
LoadCurrentSession ( string file ) : void
ModifyTextAroundCaret ( int offsetStart, int offsetEnd, string text ) : void	Use this method to modify the text around the caret, it's good because : - it's wrapped around beginundo/endundo which allows the user to CTRL+Z all the actions as one - it handles the modification around ALL the carets -> good for multiselection
NewDocument ( string text ) : void	displays the input text into a new document
OpenFile ( string file ) : bool	Opens given file in notepad++
Paste ( ) : void	Pastes the contents of the clipboard into the current selection.
PointXFromPosition ( int pos ) : int	Returns the X display pixel location of the specified document position.
PointYFromPosition ( int pos ) : int	Returns the Y display pixel location of the specified document position.
RebuildLinesInfo ( ) : void	Call this to rebuild the lines information from scratch
ReplaceKeywordWrapped ( string keyword, int offset ) : void	Replaces the left part of the keyword found at (CurrentPosition + offset) by the keyword given (all wrapped in an undo action + handles multiselection)
ReplaceSelection ( string text ) : void	Replaces the current selection with the specified text. If there is not a current selection, the text will be inserted at the current caret position. Following the operation the caret is placed at the end of the inserted text and scrolled into view. Does nothing if string is null or empty?
ReplaceTarget ( string text ) : int	Replaces the target defined by TargetStart and TargetEnd with the specified text. The TargetStart and TargetEnd properties will be updated to the start and end positions of the replaced text. The recommended way to delete text in the document is to set the target range to be removed and replace the target with an empty string.
ReplaceTargetRe ( string text ) : int	Replaces the target text defined by TargetStart and TargetEnd with the specified value after first substituting "\1" through "\9" macros in the text with the most recent regular expression capture groups. The "\0" macro will be substituted by the entire matched text from the most recent search. The TargetStart and TargetEnd properties will be updated to the start and end positions of the replaced text.
RotateSelection ( ) : void	Makes the next selection the main selection.
RunCommand ( NppMenuCmd cmd ) : void	Allows to execute one of Npp's command
SaveCurrentDocument ( ) : void	Saves the current document.
SaveCurrentSession ( string file ) : void
SaveSession ( string sessionFilePath ) : bool	Saves the session into a file
ScrollCaret ( ) : void	Scrolls the current position into view, if it is not already visible.
ScrollRange ( int start, int end ) : void	Scrolls the specified range into view. This may be used to make a search match visible.
SearchInTarget ( string text ) : int	Searches for the first occurrence of the specified text in the target defined by TargetStart and TargetEnd. If successful, the TargetStart and TargetEnd properties will be updated to the start and end positions of the matched text. Searching can be performed in reverse using a TargetStart greater than the TargetEnd.
SelectAll ( ) : void	Selects all the text in the document. The current position is not scrolled into view.
SetAdditionalSelectionColor ( bool use, Color bg, Color fg ) : void	Sets a global override to the additional selections background + foreground color.
SetCommand ( int index, string commandName, System.Action functionPointer, ShortcutKey shortcut = newShortcutKey(), bool checkOnInit = false ) : void	Creates entry in the FuncItems list, which list the menu entry displayed in Npp's plugin menu
SetEmptySelection ( int pos ) : void	Removes any selection and places the caret at the specified position. The caret is not scrolled into view.
SetFoldMarginColors ( bool use, Color bgColor, Color fgColor ) : void	allow changing the colour of the fold margin and fold margin highlight
SetFoldMarginMarkersColor ( Color bgColor, Color fgColor, Color activeColor ) : void	allow changing the colour of the fold margin and fold margin highlight
SetHotSpotActiveColor ( bool use, Color fg, Color bg ) : void	While the cursor hovers over text in a style with the hotspot attribute set, the default colouring can be modified
SetIndentGuideColor ( Color bg, Color fg ) : void	sets the fore/background color of the IndentGuide, overriding the lexer's
SetSel ( int pos ) : void	Sets the current carret position + the current anchor position to the same position
SetSel ( int anchorPos, int currentPos ) : void	Sets the anchor and current position. A negative value for currentPos signifies the end of the document. A negative value for anchorPos signifies no selection (set the anchorPos to the same as the currentPos). The current position is scrolled into view following this operation.
SetSelection ( int caret ) : void	Set a single selection from anchor to caret as the ONLY selection.
SetSelection ( int caret, int anchor ) : void	Set a single selection from anchor to caret as the ONLY selection.
SetSelectionColor ( bool use, Color bg, Color fg ) : void	Sets a global override to the selection background + foreground color.
SetStatusbarLabel ( string labelText ) : string	Sets the label in the status of npp (bottom right) WARNING : THIS METHOD IS HIGHLY UNSTABLE, USE ONLY FOR DEBUG!
SetStyling ( int length, int style ) : void	Styles the specified length of characters. The styling position is advanced by length after each call allowing multiple calls to SetStyling for a single call to StartStyling.
SetTargetRange ( int start, int end ) : void	Sets the TargetStart and TargetEnd properties in a single call.
SetTextByRange ( int start, int end, string text ) : void	Sets the text of a specific range, can and must be used to delete text from range
SetToolbarImage ( Bitmap image, int pluginId ) : void	Helper to add a clickable icon in the toolbar
SetWhiteSpaceColor ( bool use, Color bg, Color fg ) : void	sets the fore/background color of the whitespaces, overriding the lexer's
ShowInactiveTopmost ( Form frm ) : void
ShowLines ( int lineStart, int lineEnd ) : void	Shows the range of lines specified.
StartBytePosOfLine ( int line ) : int	Returns the !! BYTE !! position of the start of given line Don't use THIS unless you know what you are doing with it!!!
StartRecordMacro ( ) : IntPtr
StartStyling ( int position ) : void	Prepares for styling by setting the styling position to start at. After preparing the document for styling, use successive calls to SetStyling to style the document.
StyleClearAll ( ) : void	Resets all style properties to those currently configured for the Style.Default style.
StyleResetDefault ( ) : void	Resets the Style.Default style to its initial state.
StyleTextEx ( int startPos, byte styleArray ) : void	TODO: UNTESTED set the style of a text from startPos to startPos + styleArray.Length, the styleArray is a array of bytes, each byte is the style number to the corresponding text byte
SwapMainAnchorCaret ( ) : void	Moves the caret to the opposite end of the main selection.
SwitchToDocument ( string doc ) : void	Switch to given document
TargetFromSelection ( ) : void	Sets the TargetStart and TargetEnd to the start and end positions of the selection.
TargetWholeDocument ( ) : void	Sets the TargetStart and TargetEnd to the start and end positions of the document.
TextHeight ( int line ) : int	Retrieve the height of a particular line of text in pixels.
TextWidth ( int style, string text ) : int	Measures the width in pixels of the specified string when rendered in the specified style.
Undo ( ) : void	Undo previous action
UpdateLinesInfo ( SCNotification scn, bool isInsertion ) : void	Call this on SCN_MODIFIED event from scintilla to update the info on lines
UpdateScintilla ( bool reverse = false ) : void	Updates the current scintilla handle for Npp's functions Called when the user changes the current document
ZoomIn ( ) : void	Increases the zoom factor by 1 until it reaches 20 points.
ZoomOut ( ) : void	Decreases the zoom factor by 1 until it reaches -10 points.

Method Details

AddSelection() public static method

Adds an additional selection range to the existing main selection.

A main selection must first have been set by a call to SetSelection.

public static AddSelection ( int caret, int anchor ) : void
caret	int	The zero-based document position to end the selection.
anchor	int	The zero-based document position to start the selection.
return	void

AnnotationClearAll() public static method

Clear all annotations in one go

public static AnnotationClearAll ( ) : void
return	void

AutoCCancel() public static method

Cancels any displayed autocompletion list.

public static AutoCCancel ( ) : void
return	void

AutoCStops() public static method

Specifies the characters that will automatically cancel autocompletion without the need to call AutoCCancel.

Characters specified should be limited to printable ASCII characters.

public static AutoCStops ( string chars ) : void
chars	string	A String of the characters that will cancel autocompletion. The default is empty.
return	void

BeginUndoAction() public static method

Mark the beginning of a set of operations that you want to undo all as one operation but that you have to generate as several operations. Alternatively, you can use these to mark a set of operations that you do not want to have combined with the preceding or following operations if they are undone.

public static BeginUndoAction ( ) : void
return	void

BitmapToArgb() public static method

public static BitmapToArgb ( Bitmap image ) : byte[]
image	System.Drawing.Bitmap
return	byte[]

BraceBadLight() public static method

Styles the specified character position with the Style.BraceBad style when there is an unmatched brace.

public static BraceBadLight ( int position ) : void
position	int	/// The zero-based document position of the unmatched brace character or InvalidPosition to remove /// the highlight. ///
return	void

BraceHighlight() public static method

Styles the specified character positions with the Style.BraceLight style.

Brace highlighting can be removed by specifying InvalidPosition for position1 and position2.

public static BraceHighlight ( int position1, int position2 ) : void
position1	int	The zero-based document position of the open brace character.
position2	int	The zero-based document position of the close brace character.
return	void

BraceMatch() public static method

Finds a corresponding matching brace starting at the position specified. The brace characters handled are '(', ')', '[', ']', '{', '}', '<', and '>'.

A match only occurs if the style of the matching brace is the same as the starting brace. Nested braces are handled correctly.

public static BraceMatch ( int position ) : int
position	int	/// The zero-based document position of a brace character to start the search from for a matching /// brace character. ///
return	int

ByteToCharStyles() public static method

public static ByteToCharStyles ( byte styles, byte text, int length, Encoding encoding ) : byte[]
styles	byte
text	byte
length	int
encoding	System.Text.Encoding
return	byte[]

CharPositionFromPointClose() public static method

Finds the closest character position to the specified display point or returns -1 if the point is outside the window or not close to any characters.

public static CharPositionFromPointClose ( int x, int y ) : int
x	int	The x pixel coordinate within the client rectangle of the control.
y	int	The y pixel coordinate within the client rectangle of the control.
return	int

CharToByteStyles() public static method

public static CharToByteStyles ( byte styles, byte text, int length, Encoding encoding ) : byte[]
styles	byte
text	byte
length	int
encoding	System.Text.Encoding
return	byte[]

Clamp() public static method

Forces a value between a minimum and a maximum

public static Clamp ( int value, int min, int max ) : int
value	int
min	int
max	int
return	int

ClampMin() public static method

Forces a value to a minimum

public static ClampMin ( int value, int min ) : int
value	int
min	int
return	int

Clear() public static method

Removes the selected text from the document.

public static Clear ( ) : void
return	void

ClearAll() public static method

Deletes all document text, unless the document is read-only.

public static ClearAll ( ) : void
return	void

ClearDocumentStyle() public static method

Removes all styling from the document and resets the folding state.

public static ClearDocumentStyle ( ) : void
return	void

ClearSelections() public static method

Sets a single empty selection at the start of the document.

public static ClearSelections ( ) : void
return	void

Colorize() public static method

Requests that the current lexer restyle the specified range.

This will also cause fold levels in the range specified to be reset.

public static Colorize ( int startPos, int endPos ) : void
startPos	int	The zero-based document position at which to start styling.
endPos	int	The zero-based document position at which to stop styling (exclusive).
return	void

ConvertEols() public static method

Changes all end-of-line characters in the document to the format specified.

public static ConvertEols ( Eol eolMode ) : void
eolMode	Eol	One of the Eol enumeration values.
return	void

Copy() public static method

Copies the selected text from the document and places it on the clipboard.

public static Copy ( ) : void
return	void

CopyAllowLine() public static method

Copies the selected text from the document and places it on the clipboard. If the selection is empty the current line is copied.

If the selection is empty and the current line copied, an extra "MSDEVLineSelect" marker is added to the clipboard which is then used in Paste to paste the whole line before the current line.

public static CopyAllowLine ( ) : void
return	void

CopyRange() public static method

Copies the specified range of text to the clipboard.

public static CopyRange ( int start, int end ) : void
start	int	The zero-based character position in the document to start copying.
end	int	The zero-based character position (exclusive) in the document to stop copying.
return	void

Cut() public static method

Cuts the selected text from the document and places it on the clipboard.

public static Cut ( ) : void
return	void

DeleteTextByRange() public static method

Deletes the given range of text

public static DeleteTextByRange ( int start, int end ) : void
start	int
end	int
return	void

DocLineFromVisible() public static method

Returns the zero-based document line index from the specified display line index.

public static DocLineFromVisible ( int displayLine ) : int
displayLine	int	The zero-based display line index.
return	int

DropSelection() public static method

If there are multiple selections, removes the specified selection.

public static DropSelection ( int selection ) : void
selection	int	The zero-based selection index.
return	void

EndUndoAction() public static method

Mark the end of a set of operations that you want to undo all as one operation but that you have to generate as several operations. Alternatively, you can use these to mark a set of operations that you do not want to have combined with the preceding or following operations if they are undone.

public static EndUndoAction ( ) : void
return	void

ExecuteCmd() public static method

Performs the specified command

public static ExecuteCmd ( System.Windows.Forms.Command sciCommand ) : void
sciCommand	System.Windows.Forms.Command	The command to perform.
return	void

Exit() public static method

Leaves npp

public static Exit ( ) : void
return	void

FoldAll() public static method

Performs the specified fold action on the entire document.

When using FoldAction.Toggle the first fold header in the document is examined to decide whether to expand or contract.

public static FoldAll ( FoldAction action ) : void
action	FoldAction	One of the FoldAction enumeration values.
return	void

GetAblWordAtPosition() public static method

Returns the ABL word at the given position (read on left and right) (stops at points)

public static GetAblWordAtPosition ( int position ) : string
position	int
return	string

GetBytes() public static method

Returns char array's bytes array with given encoding

public static GetBytes ( char text, int length, Encoding encoding, bool zeroTerminated ) : byte[]
text	char
length	int
encoding	System.Text.Encoding
zeroTerminated	bool
return	byte[]

GetBytes() public static method

Returns a string's bytes array with given encoding

public static GetBytes ( string text, Encoding encoding, bool zeroTerminated ) : byte[]
text	string
encoding	System.Text.Encoding
zeroTerminated	bool
return	byte[]

GetCaretScreenLocation() public static method

Gets the current screen location of the caret.

public static GetCaretScreenLocation ( ) : Point
return	Point

GetColumn() public static method

Returns the column number of the specified document position, taking the width of tabs into account.

public static GetColumn ( int position ) : int
position	int	The zero-based document position to get the column for.
return	int

GetConfigDir() public static method

Returns the configuration directory path e.g. /plugins/config/{AssemblyProduct}

public static GetConfigDir ( ) : string
return	string

GetCurrentFileExtension() public static method

returns the current file's extension

public static GetCurrentFileExtension ( ) : string
return	string

GetCurrentFileFolder() public static method

Returns the current file folder (uses GetDirectoryName)

public static GetCurrentFileFolder ( ) : string
return	string

GetCurrentFileName() public static method

Returns the current file base name (uses GetFileName)

public static GetCurrentFileName ( ) : string
return	string

GetCurrentFilePath() public static method

Gets the path of the current document.

public static GetCurrentFilePath ( ) : string
return	string

GetEndStyled() public static method

Returns the last document position likely to be styled correctly.

public static GetEndStyled ( ) : int
return	int

GetFirstWordRightAfterPoint() public static method

returns the first keyword right after the point (reading from right to left) it is useful to get a table name when we enter a field, or a database name when we enter a table name, also, if you analyse DATABASE.TABLE.CURFIELD, if returns TABLE and not DATABASE!

public static GetFirstWordRightAfterPoint ( int curPos ) : string
curPos	int
return	string

GetFocus() public static method

to be tested!!!!

public static GetFocus ( ) : bool
return	bool

GetIndentString() public static method

returns the indent value as a string, can be either a \t or a number of ' '

public static GetIndentString ( ) : string
return	string

GetIndicator() public static method

Returns an indicator object Range of indicator id to use is from 8=INDIC_CONTAINER .. to 31=INDIC_IME-1

public static GetIndicator ( int index ) : Indicator
index	int
return	Indicator

GetKeyword() public static method

Gets the keyword at given position (reading only on the left of the position)

public static GetKeyword ( int curPos = -1 ) : string
curPos	int
return	string

GetLine() public static method

Returns a Line object representing the current line

public static GetLine ( ) : Line
return	Line

GetLine() public static method

Returns a Line object representing the given line

public static GetLine ( int index ) : Line
index	int
return	Line

GetMargin() public static method

Returns a margin object The margins are numbered 0 to 4. Using a margin number outside the valid range has no effect. By default, margin 0 is set to display line numbers, but is given a width of 0, so it is hidden. Margin 1 is set to display non-folding symbols and is given a width of 16 pixels, so it is visible. Margin 2 is set to display the folding symbols, but is given a width of 0, so it is hidden. Of course, you can set the margins to be whatever you wish.

public static GetMargin ( int index ) : Margin
index	int
return	Margin

GetMarker() public static method

Returns a marker object There are 32 markers, numbered 0 to MARKER_MAX (31), and you can assign any combination of them to each line in the document Marker numbers 25 to 31 are used by Scintilla in folding margins Marker numbers 0 to 24 have no pre-defined function; you can use them

public static GetMarker ( int index ) : Marker
index	int
return	Marker

GetNppDirectory() public static method

returns npp's folder path

public static GetNppDirectory ( ) : string
return	string

GetOpenedFiles() public static method

Gets the file path of each file currently opened

public static GetOpenedFiles ( ) : List
return	List

GetOpenedFilesPrimary() public static method

Gets the file path of each file currently opened in the primary view

public static GetOpenedFilesPrimary ( ) : List
return	List

GetOpenedFilesSecondary() public static method

Gets the file path of each file currently opened in the secondary view

public static GetOpenedFilesSecondary ( ) : List
return	List

GetPointXyFromPosition() public static method

returns the x,y point location of the character at the position given

public static GetPointXyFromPosition ( int position ) : Point
position	int
return	Point

GetPosFromLineColumn() public static method

This message returns the position of a column on a line taking the width of tabs into account. It treats a multi-byte character as a single column. Column numbers, like lines start at 0.

public static GetPosFromLineColumn ( int line, int column ) : int
line	int
column	int
return	int

GetPositionFromMouseLocation() public static method

Self explaining

public static GetPositionFromMouseLocation ( ) : int
return	int

GetScintillaRectangle() public static method

returns a rectangle representing the location and size of the scintilla window

public static GetScintillaRectangle ( ) : Rectangle
return	System.Drawing.Rectangle

GetSelection() public static method

Returns a selection object

public static GetSelection ( int index ) : Selection
index	int
return	Selection

GetSessionFiles() public static method

Gets the file path of each file in the session file, return the files separated by a new line

public static GetSessionFiles ( string sessionFilePath ) : string
sessionFilePath	string
return	string

GetString() public static method

Get string from pointer

public static GetString ( IntPtr bytes, int length, Encoding encoding ) : string
bytes	System.IntPtr
length	int
encoding	System.Text.Encoding
return	string

GetStyle() public static method

Returns a style object There are 256 lexer styles that can be set, numbered 0 to STYLE_MAX (255). There are also some predefined numbered styles starting at 32.

public static GetStyle ( byte index ) : Style
index	byte
return	_3PA.MainFeatures.Style

GetStyleAt() public static method

Gets the style of the specified document position.

public static GetStyleAt ( int position ) : int
position	int	The zero-based document position of the character to get the style for.
return	int

GetTag() public static method

Returns the capture group text of the most recent regular expression search.

public static GetTag ( int tagNumber ) : string
tagNumber	int	The capture group (1 through 9) to get the text for.
return	string

GetTextBetween() public static method

public static GetTextBetween ( Point point ) : string
point	Point
return	string

GetTextByRange() public static method

Gets a range of text from the document.

public static GetTextByRange ( int start, int end ) : string
start	int	The zero-based starting character position of the range to get.
end	int	The zero-based ending character position of the range to get.
return	string

GetTextOnLeftOfPos() public static method

returns the text on the left of the position... it will always return empty string at minima

public static GetTextOnLeftOfPos ( int curPos, int maxLenght = KeywordMaxLength ) : string
curPos	int
maxLenght	int
return	string

GetTextOnRightOfPos() public static method

returns the text on the right of the position... it will always return empty string at minima

public static GetTextOnRightOfPos ( int curPos, int maxLenght = KeywordMaxLength ) : string
curPos	int
maxLenght	int
return	string

GetTextRange() public static method

Gets a range of text from the document.

public static GetTextRange ( int position, int length ) : string
position	int	The zero-based starting character position of the range to get.
length	int	The number of characters to get.
return	string

GoBackFromDefinition() public static method

When you use the GoToDefinition method, you stack points of your position before the jump, this method allows you to navigate back to where you were

public static GoBackFromDefinition ( ) : void
return	void

GoToLine() public static method

Move the caret and the view to the specified line (lines starts 0!)

public static GoToLine ( int line ) : void
line	int
return	void

Goto() public static method

Switch to a document, can be already opended or not

public static Goto ( string document, int line = -1, int column = -1 ) : void
document	string
line	int
column	int
return	void

Goto() public static method

Switch to a document, can be already opended or not, can decide to remember the current position to jump back to it

public static Goto ( string document, int position, int line, int column, bool saveHistoric ) : void
document	string
position	int
line	int
column	int
saveHistoric	bool
return	void

GotoPos() public static method

Switch to a document, can be already opended or not

public static GotoPos ( string document, int position ) : void
document	string
position	int
return	void

GotoPosition() public static method

Navigates the caret to the document position specified.

Any selection is discarded.

public static GotoPosition ( int position ) : void
position	int	The zero-based document character position to navigate to.
return	void

GrabFocus() public static method

allows scintilla to grab focus

public static GrabFocus ( ) : void
return	void

HideLines() public static method

Hides the range of lines specified.

public static HideLines ( int lineStart, int lineEnd ) : void
lineStart	int	The zero-based index of the line range to start hiding.
lineEnd	int	The zero-based index of the line range to end hiding.
return	void

InsertText() public static method

Inserts text at the specified position.

No scrolling is performed.

/// less than zero and not equal to -1. -or- /// is greater than the document length. ///

public static InsertText ( int position, string text ) : void
position	int	/// The zero-based character position to insert the text. Specify -1 to use the current caret /// position. ///
text	string	The text to insert into the document.
return	void

IsCurrentFileHasExtension() public static method

Determines whether the current file has the specified extension (e.g. ".cs").

Note it is case insensitive.

public static IsCurrentFileHasExtension ( string extension ) : bool
extension	string	The extension.
return	bool

LineFromPosition() public static method

Returns the line that contains the document position specified.

public static LineFromPosition ( int position ) : int
position	int	The zero-based document character position.
return	int

LineScroll() public static method

Scrolls the display the number of lines and columns specified.

Negative values scroll in the opposite direction. A column is the width in pixels of a space character in the Style.Default style.

public static LineScroll ( int lines, int columns ) : void
lines	int	The number of lines to scroll.
columns	int	The number of columns to scroll.
return	void

LoadCurrentSession() public static method

public static LoadCurrentSession ( string file ) : void
file	string
return	void

ModifyTextAroundCaret() public static method

Use this method to modify the text around the caret, it's good because :

- it's wrapped around beginundo/endundo which allows the user to CTRL+Z all the actions as one

- it handles the modification around ALL the carets -> good for multiselection

public static ModifyTextAroundCaret ( int offsetStart, int offsetEnd, string text ) : void
offsetStart	int	offset relative to the current carret position
offsetEnd	int	offset relative to the current carret position
text	string
return	void

NewDocument() public static method

displays the input text into a new document

public static NewDocument ( string text ) : void
text	string
return	void

OpenFile() public static method

Opens given file in notepad++

public static OpenFile ( string file ) : bool
file	string
return	bool

Paste() public static method

Pastes the contents of the clipboard into the current selection.

public static Paste ( ) : void
return	void

PointXFromPosition() public static method

Returns the X display pixel location of the specified document position.

public static PointXFromPosition ( int pos ) : int
pos	int	The zero-based document character position.
return	int

PointYFromPosition() public static method

Returns the Y display pixel location of the specified document position.

public static PointYFromPosition ( int pos ) : int
pos	int	The zero-based document character position.
return	int

RebuildLinesInfo() public static method

Call this to rebuild the lines information from scratch

public static RebuildLinesInfo ( ) : void
return	void

ReplaceKeywordWrapped() public static method

Replaces the left part of the keyword found at (CurrentPosition + offset) by the keyword given (all wrapped in an undo action + handles multiselection)

public static ReplaceKeywordWrapped ( string keyword, int offset ) : void
keyword	string
offset	int	offset relative to the current carret position
return	void

ReplaceSelection() public static method

Replaces the current selection with the specified text.

If there is not a current selection, the text will be inserted at the current caret position. Following the operation the caret is placed at the end of the inserted text and scrolled into view. Does nothing if string is null or empty?

public static ReplaceSelection ( string text ) : void
text	string	The text that should replace the current selection.
return	void

ReplaceTarget() public static method

Replaces the target defined by TargetStart and TargetEnd with the specified text.

The TargetStart and TargetEnd properties will be updated to the start and end positions of the replaced text. The recommended way to delete text in the document is to set the target range to be removed and replace the target with an empty string.

public static ReplaceTarget ( string text ) : int
text	string	The text that will replace the current target.
return	int

ReplaceTargetRe() public static method

Replaces the target text defined by TargetStart and TargetEnd with the specified value after first substituting "\1" through "\9" macros in the text with the most recent regular expression capture groups.

The "\0" macro will be substituted by the entire matched text from the most recent search. The TargetStart and TargetEnd properties will be updated to the start and end positions of the replaced text.

public static ReplaceTargetRe ( string text ) : int
text	string	/// The text containing "\n" macros that will be substituted with the most recent regular expression /// capture groups and then replace the current target. ///
return	int

RotateSelection() public static method

Makes the next selection the main selection.

public static RotateSelection ( ) : void
return	void

RunCommand() public static method

Allows to execute one of Npp's command

public static RunCommand ( NppMenuCmd cmd ) : void
cmd	NppMenuCmd
return	void

SaveCurrentDocument() public static method

Saves the current document.

public static SaveCurrentDocument ( ) : void
return	void

SaveCurrentSession() public static method

public static SaveCurrentSession ( string file ) : void
file	string
return	void

SaveSession() public static method

Saves the session into a file

public static SaveSession ( string sessionFilePath ) : bool
sessionFilePath	string
return	bool

ScrollCaret() public static method

Scrolls the current position into view, if it is not already visible.

public static ScrollCaret ( ) : void
return	void

ScrollRange() public static method

Scrolls the specified range into view.

This may be used to make a search match visible.

public static ScrollRange ( int start, int end ) : void
start	int	The zero-based document start position to scroll to.
end	int	/// The zero-based document end position to scroll to if doing so does not cause the /// position to scroll out of view. ///
return	void

SearchInTarget() public static method

Searches for the first occurrence of the specified text in the target defined by TargetStart and TargetEnd.

If successful, the TargetStart and TargetEnd properties will be updated to the start and end positions of the matched text. Searching can be performed in reverse using a TargetStart greater than the TargetEnd.

public static SearchInTarget ( string text ) : int
text	string	/// The text to search for. The interpretation of the text (i.e. whether it is a regular expression) is /// defined by the SearchFlags property. ///
return	int

SelectAll() public static method

Selects all the text in the document.

The current position is not scrolled into view.

public static SelectAll ( ) : void
return	void

SetAdditionalSelectionColor() public static method

Sets a global override to the additional selections background + foreground color.

public static SetAdditionalSelectionColor ( bool use, Color bg, Color fg ) : void
use	bool
bg	Color
fg	Color
return	void

SetCommand() public static method

Creates entry in the FuncItems list, which list the menu entry displayed in Npp's plugin menu

public static SetCommand ( int index, string commandName, System.Action functionPointer, ShortcutKey shortcut = newShortcutKey(), bool checkOnInit = false ) : void
index	int
commandName	string
functionPointer	System.Action
shortcut	_3PA.Interop.ShortcutKey
checkOnInit	bool
return	void

SetEmptySelection() public static method

Removes any selection and places the caret at the specified position.

The caret is not scrolled into view.

public static SetEmptySelection ( int pos ) : void
pos	int	The zero-based document position to place the caret at.
return	void

SetFoldMarginColors() public static method

allow changing the colour of the fold margin and fold margin highlight

public static SetFoldMarginColors ( bool use, Color bgColor, Color fgColor ) : void
use	bool
bgColor	Color
fgColor	Color
return	void

SetFoldMarginMarkersColor() public static method

allow changing the colour of the fold margin and fold margin highlight

public static SetFoldMarginMarkersColor ( Color bgColor, Color fgColor, Color activeColor ) : void
bgColor	Color
fgColor	Color
activeColor	Color
return	void

SetHotSpotActiveColor() public static method

While the cursor hovers over text in a style with the hotspot attribute set, the default colouring can be modified

public static SetHotSpotActiveColor ( bool use, Color fg, Color bg ) : void
use	bool
fg	Color
bg	Color
return	void

SetIndentGuideColor() public static method

sets the fore/background color of the IndentGuide, overriding the lexer's

public static SetIndentGuideColor ( Color bg, Color fg ) : void
bg	Color
fg	Color
return	void

SetSel() public static method

Sets the current carret position + the current anchor position to the same position

public static SetSel ( int pos ) : void
pos	int
return	void

SetSel() public static method

Sets the anchor and current position.

A negative value for currentPos signifies the end of the document. A negative value for anchorPos signifies no selection (set the anchorPos to the same as the currentPos). The current position is scrolled into view following this operation.

public static SetSel ( int anchorPos, int currentPos ) : void
anchorPos	int	The zero-based document position to start the selection.
currentPos	int	The zero-based document position to end the selection.
return	void

SetSelection() public static method

Set a single selection from anchor to caret as the ONLY selection.

public static SetSelection ( int caret ) : void
caret	int	The zero-based document position to end the selection.
return	void

SetSelection() public static method

Set a single selection from anchor to caret as the ONLY selection.

public static SetSelection ( int caret, int anchor ) : void
caret	int	The zero-based document position to end the selection.
anchor	int	The zero-based document position to start the selection.
return	void

SetSelectionColor() public static method

Sets a global override to the selection background + foreground color.

public static SetSelectionColor ( bool use, Color bg, Color fg ) : void
use	bool
bg	Color
fg	Color
return	void

SetStatusbarLabel() public static method

Sets the label in the status of npp (bottom right)

WARNING : THIS METHOD IS HIGHLY UNSTABLE, USE ONLY FOR DEBUG!

public static SetStatusbarLabel ( string labelText ) : string
labelText	string
return	string

SetStyling() public static method

Styles the specified length of characters.

The styling position is advanced by length after each call allowing multiple calls to SetStyling for a single call to StartStyling.

/// or is less than zero. -or- /// The sum of a preceeding call to StartStyling or and is greater /// than the document length. -or- /// is greater than or equal to the number of style definitions. ///

public static SetStyling ( int length, int style ) : void
length	int	The number of characters to style.
style	int	The Style definition index to assign each character.
return	void

SetTargetRange() public static method

Sets the TargetStart and TargetEnd properties in a single call.

public static SetTargetRange ( int start, int end ) : void
start	int	The zero-based character position within the document to start a search or replace operation.
end	int	The zero-based character position within the document to end a search or replace operation.
return	void

SetTextByRange() public static method

Sets the text of a specific range, can and must be used to delete text from range

public static SetTextByRange ( int start, int end, string text ) : void
start	int
end	int
text	string
return	void

SetToolbarImage() public static method

Helper to add a clickable icon in the toolbar

public static SetToolbarImage ( Bitmap image, int pluginId ) : void
image	System.Drawing.Bitmap
pluginId	int
return	void

SetWhiteSpaceColor() public static method

sets the fore/background color of the whitespaces, overriding the lexer's

public static SetWhiteSpaceColor ( bool use, Color bg, Color fg ) : void
use	bool
bg	Color
fg	Color
return	void

ShowInactiveTopmost() public static method

public static ShowInactiveTopmost ( Form frm ) : void
frm	System.Windows.Forms.Form
return	void

ShowLines() public static method

Shows the range of lines specified.

public static ShowLines ( int lineStart, int lineEnd ) : void
lineStart	int	The zero-based index of the line range to start showing.
lineEnd	int	The zero-based index of the line range to end showing.
return	void

StartBytePosOfLine() public static method

Returns the !! BYTE !! position of the start of given line Don't use THIS unless you know what you are doing with it!!!

public static StartBytePosOfLine ( int line ) : int
line	int
return	int

StartRecordMacro() public static method

public static StartRecordMacro ( ) : IntPtr
return	System.IntPtr

StartStyling() public static method

Prepares for styling by setting the styling position to start at.

After preparing the document for styling, use successive calls to SetStyling to style the document.

public static StartStyling ( int position ) : void
position	int	The zero-based character position in the document to start styling.
return	void

StyleClearAll() public static method

Resets all style properties to those currently configured for the Style.Default style.

public static StyleClearAll ( ) : void
return	void

StyleResetDefault() public static method

Resets the Style.Default style to its initial state.

public static StyleResetDefault ( ) : void
return	void

StyleTextEx() public static method

TODO: UNTESTED set the style of a text from startPos to startPos + styleArray.Length, the styleArray is a array of bytes, each byte is the style number to the corresponding text byte

public static StyleTextEx ( int startPos, byte styleArray ) : void
startPos	int
styleArray	byte
return	void

SwapMainAnchorCaret() public static method

Moves the caret to the opposite end of the main selection.

public static SwapMainAnchorCaret ( ) : void
return	void

SwitchToDocument() public static method

Switch to given document

public static SwitchToDocument ( string doc ) : void
doc	string
return	void

TargetFromSelection() public static method

Sets the TargetStart and TargetEnd to the start and end positions of the selection.

public static TargetFromSelection ( ) : void
return	void

TargetWholeDocument() public static method

Sets the TargetStart and TargetEnd to the start and end positions of the document.

public static TargetWholeDocument ( ) : void
return	void

TextHeight() public static method

Retrieve the height of a particular line of text in pixels.

public static TextHeight ( int line ) : int
line	int
return	int

TextWidth() public static method

Measures the width in pixels of the specified string when rendered in the specified style.

public static TextWidth ( int style, string text ) : int
style	int	The index of the Style to use when rendering the text to measure.
text	string	The text to measure.
return	int

Undo() public static method

Undo previous action

public static Undo ( ) : void
return	void

UpdateLinesInfo() public static method

Call this on SCN_MODIFIED event from scintilla to update the info on lines

public static UpdateLinesInfo ( SCNotification scn, bool isInsertion ) : void
scn	_3PA.Interop.SCNotification
isInsertion	bool
return	void

UpdateScintilla() public static method

Updates the current scintilla handle for Npp's functions Called when the user changes the current document

public static UpdateScintilla ( bool reverse = false ) : void
reverse	bool
return	void

ZoomIn() public static method

Increases the zoom factor by 1 until it reaches 20 points.

public static ZoomIn ( ) : void
return	void

ZoomOut() public static method

Decreases the zoom factor by 1 until it reaches -10 points.

public static ZoomOut ( ) : void
return	void