C# Class Mono.Debugger.Backend.SingleSteppingEngine

The single stepping engine is responsible for doing all the stepping operations. sse - short for single stepping engine. stepping operation - an operation which has been invoked by the user such as StepLine(), NextLine() etc. atomic operation - an operation which the sse invokes on the target such as stepping one machine instruction or resuming the target until a breakpoint is hit. step frame - an address range; the sse invokes atomic operations until the target hit a breakpoint, received a signal or stopped at an address outside this range. temporary breakpoint - a breakpoint which is automatically removed the next time the target stopped; it is used to step over method calls. source stepping op - stepping operation based on the program's source code, such as StepLine() or NextLine(). native stepping op - stepping operation based on the machine code such as StepInstruction() or NextInstruction(). The SingleSteppingEngine supports both synchronous and asynchronous operations; in synchronous mode, the engine waits until the child has stopped before returning. In either case, the step commands return true on success and false an error. Since the SingleSteppingEngine can be used from multiple threads at the same time, you can no longer safely use the `State' property to find out whether the target is stopped or not. It is safe to call all the step commands from multiple threads, but for obvious reasons only one command can run at a time. So if you attempt to issue a step command while the engine is still busy, the step command will return false to signal this error. The ThreadManager creates one SingleSteppingEngine instance for each thread in the target. The `SingleSteppingEngine' class is basically just responsible for whatever happens in the background thread: processing commands and events. Their methods are just meant to be called from the SingleSteppingEngine (since it's a protected nested class they can't actually be called from anywhere else). See the `Thread' class for the "user interface".

Inheritance: ThreadServant

ファイルを表示 Open project: baulig/debugger Class Usage Examples

Protected Properties

Property	Type	Description
current_backtrace	Backtrace
current_frame	System.Diagnostics.StackFrame
current_method	Method
registers	Registers

Private Properties

Property	Type	Description
AbortInvocation	void
AbortRuntimeInvoke	OperationRuntimeInvoke
AcquireThreadLock	void
ActivatePendingBreakpoints	bool
CreateStepFrame	StepFrame
CreateStepFrame	StepFrame
DetachThread	void
DoTargetAccess	object
GetCallbackFrame	Inferior.CallbackFrame
GetRuntimeInvokedFunction	Mono.Debugger.Languages.TargetFunctionType
InitializeBreakpoints	bool
InsertBreakpoint	void
Invoke	object
Old_Step	ThreadCommandResult
OnExecd	CommandResult
OnManagedCallback	bool
OnManagedThreadCreated	void
OnManagedThreadExited	void
OnModuleLoaded	bool
OnThreadExited	void
ProcessOperation	CommandResult
ReleaseThreadLock	void
ReleaseThreadLock	void
RemoveBreakpoint	void
ResumeUserThread	void
SendCommand	object
SetMainReturnAddress	void
SetManagedThreadData	void
SetTID	void
StartOperation	CommandResult
SuspendUserThread	void
check_method_operation	System.Operation
check_runtime_version	bool
child_breakpoint	bool
compute_frame	System.Diagnostics.StackFrame
frame_changed	System.Operation
handle_exception	bool
is_in_step_frame	bool
is_managed_frame	bool
lookup_breakpoint	Breakpoint
save_stack	StackData
step_over_breakpoint	bool
throw_exception	ExceptionAction

Public Methods

Method	Description
CallMethod ( TargetAddress method, TargetAddress method_arg, TargetObject object_arg ) : CommandResult
CallMethod ( TargetAddress method, long arg1, long arg2 ) : CommandResult
CallMethod ( TargetAddress method, long arg1, long arg2, long arg3, string string_argument ) : CommandResult
Detach ( ) : void
DisassembleInstruction ( Method method, TargetAddress address ) : AssemblerLine
DisassembleMethod ( Method method ) : AssemblerMethod
GetBacktrace ( Backtrace mode, int max_frames ) : Backtrace
GetInstructionSize ( TargetAddress address ) : int
GetMemoryMaps ( ) : TargetMemoryArea[]
GetRegisters ( ) : Registers
Kill ( ) : void
Lookup ( TargetAddress address ) : Method
ManagedCallback ( ManagedCallbackFunction func, CommandResult result ) : bool
PrintObject ( Style style, TargetObject obj, DisplayFormat format ) : string
PrintType ( Style style, TargetType type ) : string
ProcessEvent ( Inferior cevent ) : bool
ProcessEvent ( int status ) : void	This is called from the SingleSteppingEngine's main event loop to give us the next event - `status' has no meaning to us, it's just meant to be passed to inferior.ProcessEvent() to get the actual event. Actually, `status' is the waitpid() status code. In Linux 2.6.x, you can call waitpid() from any thread in the debugger, but we need to get the target's registers to find out whether it's a breakpoint etc. That's done in inferior.ProcessEvent() - which must always be called from the engine's thread.
ReadAddress ( TargetAddress address ) : TargetAddress
ReadBuffer ( TargetAddress address, int size ) : byte[]
ReadByte ( TargetAddress address ) : byte
ReadInteger ( TargetAddress address ) : int
ReadLongInteger ( TargetAddress address ) : long
ReadMemory ( TargetAddress address, int size ) : TargetBlob
ReadString ( TargetAddress address ) : string
Return ( ReturnMode mode ) : CommandResult
RuntimeInvoke ( TargetFunctionType function, TargetStructObject object_argument, TargetObject param_objects, RuntimeInvokeFlags flags, RuntimeInvokeResult result ) : void
SetKilledFlag ( ) : void
SetRegisters ( Registers registers ) : void
SimpleLookup ( TargetAddress address, bool exact_match ) : Symbol
SingleSteppingEngine ( ThreadManager manager, Process process, Inferior inferior, int pid ) : System
SingleSteppingEngine ( ThreadManager manager, Process process, ProcessStart start ) : System
StartApplication ( CommandResult result ) : CommandResult
StartExecedChild ( CommandResult result ) : CommandResult
StartForkedChild ( CommandResult result ) : CommandResult
StartSuspended ( ) : void
StartThread ( CommandResult result ) : CommandResult
Step ( ThreadingModel model, StepMode mode, StepFrame frame ) : CommandResult
Stop ( ) : void
ToString ( ) : string
WriteAddress ( TargetAddress address, TargetAddress value ) : void
WriteBuffer ( TargetAddress address, byte buffer ) : void
WriteByte ( TargetAddress address, byte value ) : void
WriteInteger ( TargetAddress address, int value ) : void
WriteLongInteger ( TargetAddress address, long value ) : void

Protected Methods

Method	Description
CheckTrampoline ( Instruction instruction, TrampolineHandler handler ) : bool
DoAbortInvocation ( long rti_id ) : void
DoDetach ( ) : void
DoDispose ( ) : void
DoProcessEvent ( Inferior cevent ) : void
ExecuteOperation ( System.Operation operation ) : void
MethodHasSource ( Method method ) : bool
OperationCompleted ( TargetEventArgs args ) : void
OperationCompleted ( TargetEventArgs args, bool suspended ) : void
OperationInterrupted ( ) : void
ProcessOperationEvent ( Inferior cevent ) : void
PushOperation ( System.Operation operation ) : void
PushOperationNoExec ( System.Operation operation ) : void
SingleSteppingEngine ( ThreadManager manager, Process process ) : System
StartOperation ( ) : void	Start a new stepping operation. All stepping operations are done asynchronously. The inferior basically just knows two kinds of stepping operations: there is do_continue() to continue execution (until a breakpoint is hit or the target receives a signal or exits) and there is do_step_native() to single-step one machine instruction. There's also a version of do_continue() which takes an address - it inserts a temporary breakpoint on that address and calls do_continue(). Let's call these "atomic operations" while a "stepping operation" is something like stepping until the next source line. We normally need to do several atomic operations for each stepping operation. We start a new stepping operation here, but what we actually do is starting an atomic operation on the target. Note that we just start it, but don't wait until is completed. Once the target is running, we go back to the main event loop and wait for it (or another thread) to stop (or to get another command from the user).
check_inferior ( ) : void
disable_extended_notification ( NotificationType type ) : void
do_continue ( ) : void	Resume the target.
do_continue ( TargetAddress until ) : void
do_next ( ) : void	Step over the next machine instruction.
do_step ( ) : void
do_step_native ( ) : void
enable_extended_notification ( NotificationType type ) : void
enforce_managed_context ( ) : void
frames_invalid ( ) : void
insert_lmf_breakpoint ( TargetAddress lmf_address ) : void
insert_temporary_breakpoint ( TargetAddress address ) : void
remove_lmf_breakpoint ( ) : void
remove_temporary_breakpoint ( ) : void
request_managed_callback ( ManagedCallbackData data ) : void
restore_stack ( StackData stack ) : void
set_registers ( Registers registers ) : void
update_current_frame ( StackFrame new_frame ) : void

Private Methods

Method	Description
AbortInvocation ( long rti_id ) : void
AbortRuntimeInvoke ( long rti_id ) : OperationRuntimeInvoke
AcquireThreadLock ( ) : void	Interrupt any currently running stepping operation, but don't send any notifications to the caller. The currently running operation is automatically resumed when ReleaseThreadLock() is called.
ActivatePendingBreakpoints ( Module module ) : bool
CreateStepFrame ( ) : StepFrame	Create a step frame to step until the next source line.
CreateStepFrame ( StepMode mode ) : StepFrame	Create a step frame for a native stepping operation.
DetachThread ( ) : void
DoTargetAccess ( TargetAccessHandler func ) : object
GetCallbackFrame ( TargetAddress stack_pointer, bool exact_match ) : Inferior.CallbackFrame
GetRuntimeInvokedFunction ( long ID ) : TargetFunctionType
InitializeBreakpoints ( ) : bool
InsertBreakpoint ( BreakpointHandle handle, TargetAddress address, int domain ) : void
Invoke ( TargetAccessDelegate func, object data ) : object
Old_Step ( StepMode mode, StepFrame frame ) : ThreadCommandResult
OnExecd ( SingleSteppingEngine new_engine ) : CommandResult
OnManagedCallback ( Queue callbacks ) : bool
OnManagedThreadCreated ( TargetAddress end_stack_address ) : void
OnManagedThreadExited ( ) : void
OnModuleLoaded ( Module module ) : bool
OnThreadExited ( Inferior cevent ) : void
ProcessOperation ( System.Operation operation ) : CommandResult
ReleaseThreadLock ( ) : void
ReleaseThreadLock ( Inferior cevent ) : void
RemoveBreakpoint ( BreakpointHandle handle ) : void
ResumeUserThread ( CommandResult result ) : void
SendCommand ( TargetAccessDelegate target ) : object
SetMainReturnAddress ( TargetAddress main_ret ) : void
SetManagedThreadData ( TargetAddress lmf_address, TargetAddress extended_notifications_addr ) : void
SetTID ( long tid ) : void
StartOperation ( System.Operation operation ) : CommandResult
SuspendUserThread ( ) : void
check_method_operation ( TargetAddress address, Method method, SourceAddress source, System.Operation operation ) : System.Operation	Checks whether to do a "method operation". This is only used while doing a source stepping operation and ensures that we don't stop somewhere inside a method's prologue code or between two source lines.
check_runtime_version ( int major, int minor ) : bool
child_breakpoint ( Inferior cevent, int index, Breakpoint &bpt ) : bool	A breakpoint has been hit; now the sse needs to find out what do do: either ignore the breakpoint and continue or keep the target stopped and send out the notification. If @index is zero, we hit an "unknown" breakpoint - ie. a breakpoint which we did not create. Normally, this means that there is a breakpoint instruction (such as G_BREAKPOINT ()) in the code. Such unknown breakpoints are handled by the Debugger; one of the language backends may recognize the breakpoint's address, for instance if this is the JIT's breakpoint trampoline. Returns true if the target should remain stopped and false to continue stepping. If we can't find a handler for the breakpoint, the default is to stop the target and let the user decide what to do.
compute_frame ( TargetAddress address ) : StackFrame
frame_changed ( TargetAddress address, System.Operation operation ) : System.Operation	This is called when a stepping operation is completed or something unexpected happened (received signal etc.). Normally, we just compute the new StackFrame here, but we may also discover that we need to do one more stepping operation, see check_method_operation().
handle_exception ( TargetAddress stack, TargetAddress exc, TargetAddress ip ) : bool
is_in_step_frame ( StepFrame frame, TargetAddress address ) : bool	Check whether @address is inside @frame.
is_managed_frame ( ) : bool
lookup_breakpoint ( int index ) : Breakpoint
save_stack ( long id ) : StackData
step_over_breakpoint ( bool singlestep, TargetAddress until ) : bool
throw_exception ( TargetAddress stack, TargetAddress exc, TargetAddress ip ) : ExceptionAction

Method Details

CallMethod() public method

public CallMethod ( TargetAddress method, TargetAddress method_arg, TargetObject object_arg ) : CommandResult
method	TargetAddress
method_arg	TargetAddress
object_arg	Mono.Debugger.Languages.TargetObject
return	CommandResult

CallMethod() public method

public CallMethod ( TargetAddress method, long arg1, long arg2 ) : CommandResult
method	TargetAddress
arg1	long
arg2	long
return	CommandResult

CallMethod() public method

public CallMethod ( TargetAddress method, long arg1, long arg2, long arg3, string string_argument ) : CommandResult
method	TargetAddress
arg1	long
arg2	long
arg3	long
string_argument	string
return	CommandResult

CheckTrampoline() protected method

protected CheckTrampoline ( Instruction instruction, TrampolineHandler handler ) : bool
instruction	Mono.Debugger.Architectures.Instruction
handler	TrampolineHandler
return	bool

Detach() public method

public Detach ( ) : void
return	void

DisassembleInstruction() public method

public DisassembleInstruction ( Method method, TargetAddress address ) : AssemblerLine
method	Method
address	TargetAddress
return	AssemblerLine

DisassembleMethod() public method

public DisassembleMethod ( Method method ) : AssemblerMethod
method	Method
return	AssemblerMethod

DoAbortInvocation() protected method

protected DoAbortInvocation ( long rti_id ) : void
rti_id	long
return	void

DoDetach() protected method

protected DoDetach ( ) : void
return	void

DoDispose() protected method

protected DoDispose ( ) : void
return	void

DoProcessEvent() protected method

protected DoProcessEvent ( Inferior cevent ) : void
cevent	Inferior
return	void

ExecuteOperation() protected method

protected ExecuteOperation ( System.Operation operation ) : void
operation	System.Operation
return	void

GetBacktrace() public method

public GetBacktrace ( Backtrace mode, int max_frames ) : Backtrace
mode	Backtrace
max_frames	int
return	Backtrace

GetInstructionSize() public method

public GetInstructionSize ( TargetAddress address ) : int
address	TargetAddress
return	int

GetMemoryMaps() public method

public GetMemoryMaps ( ) : TargetMemoryArea[]
return	TargetMemoryArea[]

GetRegisters() public method

public GetRegisters ( ) : Registers
return	Registers

Kill() public method

public Kill ( ) : void
return	void

Lookup() public method

public Lookup ( TargetAddress address ) : Method
address	TargetAddress
return	Method

ManagedCallback() public method

public ManagedCallback ( ManagedCallbackFunction func, CommandResult result ) : bool
func	ManagedCallbackFunction
result	CommandResult
return	bool

MethodHasSource() protected method

protected MethodHasSource ( Method method ) : bool
method	Method
return	bool

OperationCompleted() protected method

protected OperationCompleted ( TargetEventArgs args ) : void
args	TargetEventArgs
return	void

OperationCompleted() protected method

protected OperationCompleted ( TargetEventArgs args, bool suspended ) : void
args	TargetEventArgs
suspended	bool
return	void

OperationInterrupted() protected method

protected OperationInterrupted ( ) : void
return	void

PrintObject() public method

public PrintObject ( Style style, TargetObject obj, DisplayFormat format ) : string
style	Style
obj	Mono.Debugger.Languages.TargetObject
format	DisplayFormat
return	string

PrintType() public method

public PrintType ( Style style, TargetType type ) : string
style	Style
type	Mono.Debugger.Languages.TargetType
return	string

ProcessEvent() public method

public ProcessEvent ( Inferior cevent ) : bool
cevent	Inferior
return	bool

ProcessEvent() public method

This is called from the SingleSteppingEngine's main event loop to give us the next event - `status' has no meaning to us, it's just meant to be passed to inferior.ProcessEvent() to get the actual event.

Actually, `status' is the waitpid() status code. In Linux 2.6.x, you can call waitpid() from any thread in the debugger, but we need to get the target's registers to find out whether it's a breakpoint etc. That's done in inferior.ProcessEvent() - which must always be called from the engine's thread.

public ProcessEvent ( int status ) : void
status	int
return	void

ProcessOperationEvent() protected method

protected ProcessOperationEvent ( Inferior cevent ) : void
cevent	Inferior
return	void

PushOperation() protected method

protected PushOperation ( System.Operation operation ) : void
operation	System.Operation
return	void

PushOperationNoExec() protected method

protected PushOperationNoExec ( System.Operation operation ) : void
operation	System.Operation
return	void

ReadAddress() public method

public ReadAddress ( TargetAddress address ) : TargetAddress
address	TargetAddress
return	TargetAddress

ReadBuffer() public method

public ReadBuffer ( TargetAddress address, int size ) : byte[]
address	TargetAddress
size	int
return	byte[]

ReadByte() public method

public ReadByte ( TargetAddress address ) : byte
address	TargetAddress
return	byte

ReadInteger() public method

public ReadInteger ( TargetAddress address ) : int
address	TargetAddress
return	int

ReadLongInteger() public method

public ReadLongInteger ( TargetAddress address ) : long
address	TargetAddress
return	long

ReadMemory() public method

public ReadMemory ( TargetAddress address, int size ) : TargetBlob
address	TargetAddress
size	int
return	TargetBlob

ReadString() public method

public ReadString ( TargetAddress address ) : string
address	TargetAddress
return	string

Return() public method

public Return ( ReturnMode mode ) : CommandResult
mode	ReturnMode
return	CommandResult

RuntimeInvoke() public method

public RuntimeInvoke ( TargetFunctionType function, TargetStructObject object_argument, TargetObject param_objects, RuntimeInvokeFlags flags, RuntimeInvokeResult result ) : void
function	Mono.Debugger.Languages.TargetFunctionType
object_argument	Mono.Debugger.Languages.TargetStructObject
param_objects	Mono.Debugger.Languages.TargetObject
flags	RuntimeInvokeFlags
result	RuntimeInvokeResult
return	void

SetKilledFlag() public method

public SetKilledFlag ( ) : void
return	void

SetRegisters() public method

public SetRegisters ( Registers registers ) : void
registers	Registers
return	void

SimpleLookup() public method

public SimpleLookup ( TargetAddress address, bool exact_match ) : Symbol
address	TargetAddress
exact_match	bool
return	Symbol

SingleSteppingEngine() protected method

protected SingleSteppingEngine ( ThreadManager manager, Process process ) : System
manager	ThreadManager
process	System.Diagnostics.Process
return	System

SingleSteppingEngine() public method

public SingleSteppingEngine ( ThreadManager manager, Process process, Inferior inferior, int pid ) : System
manager	ThreadManager
process	System.Diagnostics.Process
inferior	Inferior
pid	int
return	System

SingleSteppingEngine() public method

public SingleSteppingEngine ( ThreadManager manager, Process process, ProcessStart start ) : System
manager	ThreadManager
process	System.Diagnostics.Process
start	ProcessStart
return	System

StartApplication() public method

public StartApplication ( CommandResult result ) : CommandResult
result	CommandResult
return	CommandResult

StartExecedChild() public method

public StartExecedChild ( CommandResult result ) : CommandResult
result	CommandResult
return	CommandResult

StartForkedChild() public method

public StartForkedChild ( CommandResult result ) : CommandResult
result	CommandResult
return	CommandResult

StartOperation() protected method

Start a new stepping operation. All stepping operations are done asynchronously. The inferior basically just knows two kinds of stepping operations: there is do_continue() to continue execution (until a breakpoint is hit or the target receives a signal or exits) and there is do_step_native() to single-step one machine instruction. There's also a version of do_continue() which takes an address - it inserts a temporary breakpoint on that address and calls do_continue(). Let's call these "atomic operations" while a "stepping operation" is something like stepping until the next source line. We normally need to do several atomic operations for each stepping operation. We start a new stepping operation here, but what we actually do is starting an atomic operation on the target. Note that we just start it, but don't wait until is completed. Once the target is running, we go back to the main event loop and wait for it (or another thread) to stop (or to get another command from the user).

protected StartOperation ( ) : void
return	void

StartSuspended() public method

public StartSuspended ( ) : void
return	void

StartThread() public method

public StartThread ( CommandResult result ) : CommandResult
result	CommandResult
return	CommandResult

Step() public method

public Step ( ThreadingModel model, StepMode mode, StepFrame frame ) : CommandResult
model	ThreadingModel
mode	StepMode
frame	StepFrame
return	CommandResult

Stop() public method

public Stop ( ) : void
return	void

ToString() public method

public ToString ( ) : string
return	string

WriteAddress() public method

public WriteAddress ( TargetAddress address, TargetAddress value ) : void
address	TargetAddress
value	TargetAddress
return	void

WriteBuffer() public method

public WriteBuffer ( TargetAddress address, byte buffer ) : void
address	TargetAddress
buffer	byte
return	void

WriteByte() public method

public WriteByte ( TargetAddress address, byte value ) : void
address	TargetAddress
value	byte
return	void

WriteInteger() public method

public WriteInteger ( TargetAddress address, int value ) : void
address	TargetAddress
value	int
return	void

WriteLongInteger() public method

public WriteLongInteger ( TargetAddress address, long value ) : void
address	TargetAddress
value	long
return	void

check_inferior() protected method

protected check_inferior ( ) : void
return	void

disable_extended_notification() protected method

protected disable_extended_notification ( NotificationType type ) : void
type	NotificationType
return	void

do_continue() protected method

Resume the target.

protected do_continue ( ) : void
return	void

do_continue() protected method

protected do_continue ( TargetAddress until ) : void
until	TargetAddress
return	void

do_next() protected method

Step over the next machine instruction.

protected do_next ( ) : void
return	void

do_step() protected method

protected do_step ( ) : void
return	void

do_step_native() protected method

protected do_step_native ( ) : void
return	void

enable_extended_notification() protected method

protected enable_extended_notification ( NotificationType type ) : void
type	NotificationType
return	void

enforce_managed_context() protected method

protected enforce_managed_context ( ) : void
return	void

frames_invalid() protected method

protected frames_invalid ( ) : void
return	void

insert_lmf_breakpoint() protected method

protected insert_lmf_breakpoint ( TargetAddress lmf_address ) : void
lmf_address	TargetAddress
return	void

insert_temporary_breakpoint() protected method

protected insert_temporary_breakpoint ( TargetAddress address ) : void
address	TargetAddress
return	void

remove_lmf_breakpoint() protected method

protected remove_lmf_breakpoint ( ) : void
return	void

remove_temporary_breakpoint() protected method

protected remove_temporary_breakpoint ( ) : void
return	void

request_managed_callback() protected method

protected request_managed_callback ( ManagedCallbackData data ) : void
data	ManagedCallbackData
return	void

restore_stack() protected method

protected restore_stack ( StackData stack ) : void
stack	StackData
return	void

set_registers() protected method

protected set_registers ( Registers registers ) : void
registers	Registers
return	void

update_current_frame() protected method

protected update_current_frame ( StackFrame new_frame ) : void
new_frame	System.Diagnostics.StackFrame
return	void

Property Details

current_backtrace protected_oe property

protected Backtrace current_backtrace
return	Backtrace

current_frame protected_oe property

protected StackFrame,System.Diagnostics current_frame
return	System.Diagnostics.StackFrame

current_method protected_oe property

protected Method current_method
return	Method

registers protected_oe property

protected Registers registers
return	Registers