C# Class SIL.FieldWorks.XWorks.XmlDocView

XmlDocView is a view that shows a complete list as a single view. A RecordClerk class does most of the work of managing the list and current object. list management and navigation is entirely(?) handled by the RecordClerk. The actual view of each object is specified by a child node of the view node. This specifies how to display an individual list item.

Inheritance: SIL.FieldWorks.XWorks.XWorksViewBase

Mostra file Open project: sillsdev/FieldWorks Class Usage Examples

Protected Properties

Property	Type	Description
m_configObjectName	string
m_currentIndex	int
m_currentObject	ICmObject
m_hvoOwner	int
m_mainView	SIL.FieldWorks.Common.Controls.XmlSeqView

Private Properties

Property	Type	Description
AdjustedClerkIndex	int
BaseLayoutName	string
DisposeTooltip	void
ExtractLayoutsFromLayoutTypeList	string>>.IEnumerable
FindViewNameInList	string
GatherBuiltInAndUserLayouts	string>>.IEnumerable
GetBuiltInLayouts	string>>.IEnumerable
GetPublicationName	string
GetSafeWsName	string
GetSelectedConfigView	string
GetSelectedPublication	string
GetTarget	ICmObject
GetUserDefinedDictLayouts	string>>.IEnumerable
GetWidthOfStringInPixels	int
GiveSimpleWarning	void
InitializeComponent	void
IsCurrentConfigViewChanged	bool
IsCurrentPublicationChanged	bool
IsCurrentReversalWsChanged	bool
IsDesiredPublication	bool
IsObjectVisible	bool
MakePublicationTitlePart	string
NoReasonToChangeTitle	bool
OnMouseClick	void
ResetSpacer	void
RunConfigureDialog	void
SelectAndScrollToCurrentRecord	void
SetConfigViewTitle	void
SubitemClicked	ICmObject
SubitemClicked	ICmObject
TrimToMaxPixelWidth	string
TryToJumpToSelection	void

Public Methods

Method	Description
GetPubDecorator ( ) : DictionaryPublicationDecorator
Init ( XCore.Mediator mediator, XmlNode configurationParameters ) : void
OnCheckJump ( object argument ) : bool	Check to see if the user needs to be alerted that JumpToRecord is not possible.
OnClerkOwningObjChanged ( object sender ) : bool
OnConfigureXmlDocView ( object commandObject ) : bool	Launch the configure dialog.
OnDeleteRecord ( object commandObject ) : bool	If this gets called (which it never should), just say we did it, unless we are in the context of reversal entries. In the case of reversal entries, we say we did not do it, so the record clerk deals with it.
OnDisplayConfigureXmlDocView ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool	The configure dialog may be launched any time this tool is active. Its name is derived from the name of the tool.
OnDisplayDeleteRecord ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool	see if it makes sense to provide the "delete record" command now. Currently we don't support this in document view, except for reversal entries. If we decide to support it, we will need to do additional work (cf LT-1222) to ensure that (a) The clerk's idea of the current entry corresponds to where the selection is (b) After deleting it, the clerk's list gets updated. The former is not happening because we haven't written a SelectionChange method to notice the selection in the view and change the clerk to match. Not sure why the clerk's list isn't being updated...it may be only a problem for homographs.
OnDisplayFindAndReplaceText ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool	Enables the command that just does Find, without Replace.
OnDisplayLayouts ( object parameter, XCore.UIListDisplayProperties &display ) : bool	Populate the list of layout views for the second dictionary titlebar menu.
OnDisplayPublications ( object parameter, XCore.UIListDisplayProperties &display ) : bool	Populate the list of publications for the first dictionary titlebar menu.
OnDisplayReplaceText ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool	Enables the command that just does Find, without Replace.
OnDisplayShowAllEntries ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
OnFindAndReplaceText ( object argument ) : bool	Implements the command that just does Find, without Replace.
OnPropertyChanged ( string name ) : void	Receives the broadcast message "PropertyChanged"
OnRecordNavigation ( object argument ) : bool
OnReplaceText ( object argument ) : bool	Implements the command that just does Find, without Replace.
OnSelectionChanged ( object sender, SIL.FieldWorks.Common.Utils.FwObjectSelectionEventArgs e ) : void	invoked when our XmlDocView selection changes.
OnShowAllEntries ( object args ) : bool
PostLayoutInit ( ) : void	We wait until containing controls are laid out to try to scroll our selection into view, because it depends somewhat on the window being the true size.
PrintFromDetail ( PrintDocument pd, int recordHvo ) : void	Pass command (from RecordEditView) on to printing view.
XmlDocView ( ) : System	Initializes a new instance of the ViewManager class.

Protected Methods

Method	Description
Dispose ( bool disposing ) : void	Clean up any resources being used.
DisposeContextMenu ( object sender, EventArgs e ) : void
GetMessageAdditionalTargets ( List collector ) : void	subclasses should override if they have more targets
InitBase ( XCore.Mediator mediator, XmlNode configurationParameters ) : void	Initialize this as an IxCoreColleague subclasses must call this from their Init. This was done, rather than providing an Init() here in the normal way, to drive home the point that the subclass must set m_fullyInitialized to true when it is fully initialized.
OnMouseLeave ( EventArgs e ) : void
OnMouseMove ( MouseEventArgs e ) : void
OnPaint ( PaintEventArgs e ) : void	Ensure that we have the current record selected and visible in the window. See LT-9109.
OnParentChanged ( EventArgs e ) : void
OnSizeChanged ( EventArgs e ) : void
ReadParameters ( ) : void	Read in the parameters to determine which sequence/collection we are editing.
RunConfigureDialogAt ( object sender, EventArgs e ) : void
SetInfoBarText ( ) : void
SetupDataContext ( ) : void
SetupStylesheet ( ) : void
ShowRecord ( ) : void
m_contextMenu_Closed ( object sender, System.Windows.Forms.ToolStripDropDownClosedEventArgs e ) : void
m_mainView_MouseClick ( object sender, MouseEventArgs e ) : void
m_mainView_MouseLeave ( object sender, EventArgs e ) : void
m_mainView_MouseMove ( object sender, MouseEventArgs e ) : void

Private Methods

Method	Description
AdjustedClerkIndex ( ) : int	By default this returns Clerk.CurrentIndex. However, when we are using a decorator for the view, we may need to adjust the index.
BaseLayoutName ( string name ) : string
DisposeTooltip ( ) : void
ExtractLayoutsFromLayoutTypeList ( IEnumerable layouts ) : string>>.IEnumerable
FindViewNameInList ( string>.IEnumerable layoutList ) : string
GatherBuiltInAndUserLayouts ( ) : string>>.IEnumerable
GetBuiltInLayouts ( XmlNode configNode ) : string>>.IEnumerable
GetPublicationName ( ) : string
GetSafeWsName ( ) : string
GetSelectedConfigView ( ) : string
GetSelectedPublication ( ) : string
GetTarget ( ICmObject obj, int clsid ) : ICmObject
GetUserDefinedDictLayouts ( IEnumerable builtInLayouts, IEnumerable layouts ) : string>>.IEnumerable
GetWidthOfStringInPixels ( string sInput ) : int
GiveSimpleWarning ( ExclusionReasonCode xrc ) : void
InitializeComponent ( ) : void	Required method for Designer support - do not modify the contents of this method with the code editor.
IsCurrentConfigViewChanged ( ) : bool
IsCurrentPublicationChanged ( ) : bool
IsCurrentReversalWsChanged ( ) : bool
IsDesiredPublication ( ICmPossibility item, string name ) : bool
IsObjectVisible ( int hvoTarget, ExclusionReasonCode &xrc ) : bool
MakePublicationTitlePart ( string titleStr ) : string
NoReasonToChangeTitle ( string context ) : bool
OnMouseClick ( MouseEventArgs e ) : void
ResetSpacer ( int spacerWidth, string activeLayoutName ) : void
RunConfigureDialog ( string nodePath ) : void
SelectAndScrollToCurrentRecord ( ) : void
SetConfigViewTitle ( ) : void
SubitemClicked ( Point where, int clsid ) : ICmObject	Return the most specific object identified by a click at the specified position. An object is considered indicated if it is or has an owner of the specified class. The object must be different from the outermost indicated object in the selection.
SubitemClicked ( Point where, int clsid, SimpleRootSite view, SIL.FieldWorks.FDO.FdoCache cache, ISortItemProvider sortItemProvider, IPreferedTargetAdjuster adjuster ) : ICmObject	Return an item of the specified class that is indicated by a click at the specified position, but only if it is part of a different object also of that class.
TrimToMaxPixelWidth ( int pixelWidthAllowed, string sToTrim ) : string
TryToJumpToSelection ( Point where ) : void

Method Details

Dispose() protected method

Clean up any resources being used.

protected Dispose ( bool disposing ) : void
disposing	bool	true to release both managed and unmanaged /// resources; false to release only unmanaged resources. ///
return	void

DisposeContextMenu() protected method

protected DisposeContextMenu ( object sender, EventArgs e ) : void
sender	object
e	System.EventArgs
return	void

GetMessageAdditionalTargets() protected method

subclasses should override if they have more targets

protected GetMessageAdditionalTargets ( List collector ) : void
collector	List
return	void

GetPubDecorator() public method

public GetPubDecorator ( ) : DictionaryPublicationDecorator
return	DictionaryPublicationDecorator

Init() public method

public Init ( XCore.Mediator mediator, XmlNode configurationParameters ) : void
mediator	XCore.Mediator
configurationParameters	System.Xml.XmlNode
return	void

InitBase() protected method

Initialize this as an IxCoreColleague

subclasses must call this from their Init. This was done, rather than providing an Init() here in the normal way, to drive home the point that the subclass must set m_fullyInitialized to true when it is fully initialized.

protected InitBase ( XCore.Mediator mediator, XmlNode configurationParameters ) : void
mediator	XCore.Mediator
configurationParameters	System.Xml.XmlNode
return	void

OnCheckJump() public method

Check to see if the user needs to be alerted that JumpToRecord is not possible.

public OnCheckJump ( object argument ) : bool
argument	object	the hvo of the record
return	bool

OnClerkOwningObjChanged() public method

public OnClerkOwningObjChanged ( object sender ) : bool
sender	object
return	bool

OnConfigureXmlDocView() public method

Launch the configure dialog.

public OnConfigureXmlDocView ( object commandObject ) : bool
commandObject	object
return	bool

OnDeleteRecord() public method

If this gets called (which it never should), just say we did it, unless we are in the context of reversal entries. In the case of reversal entries, we say we did not do it, so the record clerk deals with it.

public OnDeleteRecord ( object commandObject ) : bool
commandObject	object
return	bool

OnDisplayConfigureXmlDocView() public method

The configure dialog may be launched any time this tool is active. Its name is derived from the name of the tool.

public OnDisplayConfigureXmlDocView ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
commandObject	object
display	XCore.UIItemDisplayProperties
return	bool

OnDisplayDeleteRecord() public method

see if it makes sense to provide the "delete record" command now. Currently we don't support this in document view, except for reversal entries. If we decide to support it, we will need to do additional work (cf LT-1222) to ensure that (a) The clerk's idea of the current entry corresponds to where the selection is (b) After deleting it, the clerk's list gets updated. The former is not happening because we haven't written a SelectionChange method to notice the selection in the view and change the clerk to match. Not sure why the clerk's list isn't being updated...it may be only a problem for homographs.

public OnDisplayDeleteRecord ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
commandObject	object
display	XCore.UIItemDisplayProperties
return	bool

OnDisplayFindAndReplaceText() public method

Enables the command that just does Find, without Replace.

public OnDisplayFindAndReplaceText ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
commandObject	object
display	XCore.UIItemDisplayProperties
return	bool

OnDisplayLayouts() public method

Populate the list of layout views for the second dictionary titlebar menu.

public OnDisplayLayouts ( object parameter, XCore.UIListDisplayProperties &display ) : bool
parameter	object	The parameter.
display	XCore.UIListDisplayProperties	The display.
return	bool

OnDisplayPublications() public method

Populate the list of publications for the first dictionary titlebar menu.

public OnDisplayPublications ( object parameter, XCore.UIListDisplayProperties &display ) : bool
parameter	object	The parameter.
display	XCore.UIListDisplayProperties	The display.
return	bool

OnDisplayReplaceText() public method

Enables the command that just does Find, without Replace.

public OnDisplayReplaceText ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
commandObject	object
display	XCore.UIItemDisplayProperties
return	bool

OnDisplayShowAllEntries() public method

public OnDisplayShowAllEntries ( object commandObject, XCore.UIItemDisplayProperties &display ) : bool
commandObject	object
display	XCore.UIItemDisplayProperties
return	bool

OnFindAndReplaceText() public method

Implements the command that just does Find, without Replace.

public OnFindAndReplaceText ( object argument ) : bool
argument	object
return	bool

OnMouseLeave() protected method

protected OnMouseLeave ( EventArgs e ) : void
e	System.EventArgs
return	void

OnMouseMove() protected method

protected OnMouseMove ( MouseEventArgs e ) : void
e	MouseEventArgs
return	void

OnPaint() protected method

Ensure that we have the current record selected and visible in the window. See LT-9109.

protected OnPaint ( PaintEventArgs e ) : void
e	PaintEventArgs
return	void

OnParentChanged() protected method

protected OnParentChanged ( EventArgs e ) : void
e	System.EventArgs
return	void

OnPropertyChanged() public method

Receives the broadcast message "PropertyChanged"

public OnPropertyChanged ( string name ) : void
name	string
return	void

OnRecordNavigation() public method

public OnRecordNavigation ( object argument ) : bool
argument	object
return	bool

OnReplaceText() public method

Implements the command that just does Find, without Replace.

public OnReplaceText ( object argument ) : bool
argument	object
return	bool

OnSelectionChanged() public method

invoked when our XmlDocView selection changes.

public OnSelectionChanged ( object sender, SIL.FieldWorks.Common.Utils.FwObjectSelectionEventArgs e ) : void
sender	object	unused
e	SIL.FieldWorks.Common.Utils.FwObjectSelectionEventArgs	the event arguments
return	void

OnShowAllEntries() public method

public OnShowAllEntries ( object args ) : bool
args	object
return	bool

OnSizeChanged() protected method

protected OnSizeChanged ( EventArgs e ) : void
e	System.EventArgs
return	void

PostLayoutInit() public method

We wait until containing controls are laid out to try to scroll our selection into view, because it depends somewhat on the window being the true size.

public PostLayoutInit ( ) : void
return	void

PrintFromDetail() public method

Pass command (from RecordEditView) on to printing view.

public PrintFromDetail ( PrintDocument pd, int recordHvo ) : void
pd	PrintDocument	PrintDocument
recordHvo	int
return	void

ReadParameters() protected method

Read in the parameters to determine which sequence/collection we are editing.

protected ReadParameters ( ) : void
return	void

RunConfigureDialogAt() protected method

protected RunConfigureDialogAt ( object sender, EventArgs e ) : void
sender	object
e	System.EventArgs
return	void

SetInfoBarText() protected method

protected SetInfoBarText ( ) : void
return	void

SetupDataContext() protected method

protected SetupDataContext ( ) : void
return	void

SetupStylesheet() protected method

protected SetupStylesheet ( ) : void
return	void

ShowRecord() protected method

protected ShowRecord ( ) : void
return	void

XmlDocView() public method

Initializes a new instance of the ViewManager class.

public XmlDocView ( ) : System
return	System

m_contextMenu_Closed() protected method

protected m_contextMenu_Closed ( object sender, System.Windows.Forms.ToolStripDropDownClosedEventArgs e ) : void
sender	object
e	System.Windows.Forms.ToolStripDropDownClosedEventArgs
return	void

m_mainView_MouseClick() protected method

protected m_mainView_MouseClick ( object sender, MouseEventArgs e ) : void
sender	object
e	MouseEventArgs
return	void

m_mainView_MouseLeave() protected method

protected m_mainView_MouseLeave ( object sender, EventArgs e ) : void
sender	object
e	System.EventArgs
return	void

m_mainView_MouseMove() protected method

protected m_mainView_MouseMove ( object sender, MouseEventArgs e ) : void
sender	object
e	MouseEventArgs
return	void

Property Details

m_configObjectName protected_oe property

protected string m_configObjectName
return	string

m_currentIndex protected_oe property

protected int m_currentIndex
return	int

m_currentObject protected_oe property

Object currently being edited.

protected ICmObject m_currentObject
return	ICmObject

m_hvoOwner protected_oe property

protected int m_hvoOwner
return	int

m_mainView protected_oe property

protected XmlSeqView,SIL.FieldWorks.Common.Controls m_mainView
return	SIL.FieldWorks.Common.Controls.XmlSeqView