C# (CSharp) Amazon.SimpleEmail.Model Namespace

Represents the body of the message. You can specify text, HTML, or both. If you use both, then the message should display correctly in the widest variety of email clients.

For information about setting up rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Event destinations, such as Amazon CloudWatch, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

For information about publishing email sending events to Amazon CloudWatch, see the Amazon SES Developer Guide.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

By default, the text must be 7-bit ASCII, due to the constraints of the SMTP protocol. If the text must contain any other characters, then you must also specify a character set. Examples include UTF-8, ISO-8859-1, and Shift_JIS.

An event destination is the AWS service to which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Deletes the specified identity (email address or domain) from the list of verified identities.

For information about managing IP address filters, see the Amazon SES Developer Guide.

You can execute this operation no more than once per second.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Deletes the specified email address from the list of verified addresses.

IMPORTANT:The DeleteVerifiedEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The DeleteIdentity action is now preferred.

This action is throttled at one request per second.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Represents the destination of the message, consisting of To:, CC:, and BCC: fields.

Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch or Amazon Kinesis Firehose. For information about using configuration sets, see the Amazon SES Developer Guide.

This action takes a list of identities as input and returns the following information for each:

• Whether Easy DKIM signing is enabled or disabled.

• A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.

• Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This action is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

This action is throttled at one request per second and can only get custom MAIL FROM attributes for up to 100 identities at a time.

Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.

This action is throttled at one request per second.

For more information about feedback notification, see the Amazon SES Developer Guide .

Describes whether an identity has a bounce topic or complaint topic set, or feedback forwarding enabled.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.

This action is throttled at one request per second.

Represents the user's current activity limits returned from a successful GetSendQuota request.

Represents the verification attributes of a single identity.

Event destinations, such as Amazon Kinesis Firehose, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

To enable Amazon SES to call your AWS Lambda function or to publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide.

For information about using AWS Lambda actions in receipt rules, see the Amazon SES Developer Guide.

Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second and can return up to 50 configuration sets at a time.

This action is throttled at one request per second.

Represents a list of all verified identities for the AWS Account.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Represents a list of all the email addresses verified for the current user.

Represents the message to be sent, composed of a subject and a body.

Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Represents the raw data of the message.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

Each receipt rule defines a set of email addresses or domains to which it applies. If the email addresses or domains match at least one recipient address of the message, Amazon SES executes all of the receipt rule's actions on the message.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

A receipt rule set is a collection of rules that specify what Amazon SES should do with mail it receives on behalf of your account's verified domains.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

To enable Amazon SES to write emails to your Amazon S3 bucket, use an AWS KMS key to encrypt your emails, or publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide.

For information about specifying Amazon S3 actions in receipt rules, see the Amazon SES Developer Guide.

If you own the Amazon SNS topic, you don't need to do anything to give Amazon SES permission to publish emails to it. However, if you don't own the Amazon SNS topic, you need to attach a policy to the topic to give Amazon SES permissions to access it. For information about giving permissions, see the Amazon SES Developer Guide.

For information about using a receipt rule to publish an Amazon SNS notification, see the Amazon SES Developer Guide.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Represents sending statistics data. Each SendDataPoint contains statistics for a 15-minute period of sending activity.

There are several important points to know about SendEmail:

• You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.

• The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.

• Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.

• For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.

Sends an email message, with header and content specified by the client. The SendRawEmail action is useful for sending multipart MIME emails, with attachments or inline content.

The raw text of the message must comply with Internet email standards; otherwise, the message cannot be sent. For more information, go to the Amazon SES Developer Guide.

Represents a unique message ID returned from a successful SendRawEmail request.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

• If Easy DKIM signing is enabled for a domain name identity (e.g., example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (e.g., [email protected]).

• If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

For email addresses (e.g., [email protected]), you can only enable Easy DKIM signing if the corresponding domain (e.g., example.com) has been set up for Easy DKIM using the AWS Console or the VerifyDomainDkim action.

This action is throttled at one request per second.

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

This action is throttled at one request per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Given an identity (email address or domain), sets the Amazon SNS topic to which Amazon SES will publish bounce and complaint notifications for emails sent with that identity as the Source . Publishing to topics may only be disabled when feedback forwarding is enabled. For more information about feedback notification, see the Amazon SES Developer Guide.

Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch or Amazon Kinesis Firehose. For information about using configuration sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain.

This action is throttled at one request per second.

To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled action.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide .

Verifies a domain.

This action is throttled at one request per second.

Verifies an email address. This action causes a confirmation email message to be sent to the specified address.

IMPORTANT:The VerifyEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The VerifyEmailIdentity action is now preferred.

This action is throttled at one request per second.

This action is throttled at one request per second.