| Amazon.CloudFormation.Model.Internal |
| Name | Description |
|---|---|
| AlreadyExistsException | |
| CancelUpdateStackRequest | Container for the parameters to the CancelUpdateStack operation. Cancels an update on the specified stack. If the call completes successfully, the stack rolls back the update and reverts to the previous stack configuration. You can cancel only stacks that are in the UPDATE_IN_PROGRESS state. |
| Change | The Change structure describes the changes AWS CloudFormation will perform if you execute the change set. |
| ChangeSetNotFoundException | |
| ChangeSetSummary | The ChangeSetSummary structure describes a change set, its status, and the stack with which it's associated. |
| ContinueUpdateRollbackRequest | Container for the parameters to the ContinueUpdateRollback operation. For a specified stack that is in the UPDATE_ROLLBACK_FAILED state, continues rolling it back to the UPDATE_ROLLBACK_COMPLETE state. Depending on the cause of the failure, you can manually fix the error and continue the rollback. By continuing the rollback, you can return your stack to a working state (the UPDATE_ROLLBACK_COMPLETE state), and then try to update the stack again. A stack goes into the |
| CreateChangeSetRequest | Container for the parameters to the CreateChangeSet operation. Creates a list of changes for a stack. AWS CloudFormation generates the change set by comparing the template's information with the information that you submit. A change set can help you understand which resources AWS CloudFormation will change, and how it will change them, before you update your stack. Change sets allow you to check before making a change to avoid deleting or replacing critical resources. AWS CloudFormation doesn't make any changes to the stack when you create a change set. To make the specified changes, you must execute the change set by using the ExecuteChangeSet action. After the call successfully completes, AWS CloudFormation starts creating the change set. To check the status of the change set, use the DescribeChangeSet action. |
| CreateChangeSetResponse | The output for the CreateChangeSet action. |
| CreateStackRequest | Container for the parameters to the CreateStack operation. Creates a stack as specified in the template. After the call completes successfully, the stack creation starts. You can check the status of the stack via the DescribeStacks API. NOTE: Currently, the limit for stacks is 20 stacks per account per region. |
| CreateStackResponse | Returns information about the CreateStack response and response metadata. |
| CreateStackResult | The output for a CreateStack action. |
| DeleteChangeSetRequest | Container for the parameters to the DeleteChangeSet operation. Deletes the specified change set. Deleting change sets ensures that no one executes the wrong change set. If the call successfully completes, AWS CloudFormation successfully deleted the change set. |
| DeleteStackRequest | Container for the parameters to the DeleteStack operation. Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted stacks do not show up in the DescribeStacks API if the deletion has been completed successfully. |
| DescribeChangeSetRequest | Container for the parameters to the DescribeChangeSet operation. Returns the inputs for the change set and a list of changes that AWS CloudFormation will make if you execute the change set. For more information, see Updating Stacks Using Change Sets in the AWS CloudFormation User Guide. |
| DescribeChangeSetResponse | The output for the DescribeChangeSet action. |
| DescribeStackEventsRequest | Container for the parameters to the DescribeStackEvents operation. Returns all stack related events for a specified stack. For more information about a stack's event history, go to the AWS CloudFormation User Guide . NOTE:Events are returned, even if the stack never existed or has been successfully deleted. |
| DescribeStackEventsResponse | The output for a DescribeStackEvents action. |
| DescribeStackEventsResult | The output for a DescribeStackEvents action. |
| DescribeStackResourceRequest | Container for the parameters to the DescribeStackResource operation. Returns a description of the specified resource in the specified stack. For deleted stacks, DescribeStackResource returns resource information for up to 90 days after the stack has been deleted. |
| DescribeStackResourceResponse | Returns information about the DescribeStackResource response and response metadata. |
| DescribeStackResourceResult | The output for a DescribeStackResource action. |
| DescribeStackResourcesRequest | Container for the parameters to the DescribeStackResources operation. Returns AWS resource descriptions for running and deleted stacks. If StackName is specified, all the associated resources that are part of the stack are returned. If PhysicalResourceId is specified, the associated resources of the stack that the resource belongs to are returned. Only the first 100 resources will be returned. If your stack has more resources than this, you should use For deleted stacks, You must specify either A |
| DescribeStackResourcesResponse | Returns information about the DescribeStackResources response and response metadata. |
| DescribeStackResourcesResult | The output for a DescribeStackResources action. |
| DescribeStacksRequest | Container for the parameters to the DescribeStacks operation. Returns the description for the specified stack; if no stack name was specified, then it returns the description for all the stacks created. |
| DescribeStacksResponse | The output for a DescribeStacks action. |
| DescribeStacksResult | The output for a DescribeStacks action. |
| EstimateTemplateCostRequest | Container for the parameters to the EstimateTemplateCost operation. Returns the estimated monthly cost of a template. The return value is an AWS Simply Monthly Calculator URL with a query string that describes the resources required to run the template. |
| EstimateTemplateCostResponse | The output for a EstimateTemplateCost action. |
| EstimateTemplateCostResult | The output for a EstimateTemplateCost action. |
| ExecuteChangeSetRequest | Container for the parameters to the ExecuteChangeSet operation. Updates a stack using the input information that was provided when the specified change set was created. After the call successfully completes, AWS CloudFormation starts updating the stack. Use the DescribeStacks action to view the status of the update. When you execute a change set, AWS CloudFormation deletes all other change sets associated with the stack because they aren't valid for the updated stack. If a stack policy is associated with the stack, AWS CloudFormation enforces the policy during the update. You can't specify a temporary stack policy that overrides the current policy. |
| Export | The Export structure describes the exported output values for a stack. |
| GetStackPolicyRequest | Container for the parameters to the GetStackPolicy operation. Returns the stack policy for a specified stack. If a stack doesn't have a policy, a null value is returned. |
| GetStackPolicyResponse | The output for the GetStackPolicy action. |
| GetStackPolicyResult | The output for the GetStackPolicy action. |
| GetTemplateRequest | Container for the parameters to the GetTemplate operation. Returns the template body for a specified stack name. You can get the template for running or deleted stacks. For deleted stacks, GetTemplate returns the template for up to 90 days after the stack has been deleted. NOTE: If the template does not exist, a ValidationError is returned. |
| GetTemplateResponse | The output for GetTemplate action. |
| GetTemplateResult | The output for GetTemplate action. |
| GetTemplateSummaryResponse | The output for the GetTemplateSummary action. |
| InsufficientCapabilitiesException | |
| InvalidChangeSetStatusException | |
| LimitExceededException | |
| ListChangeSetsRequest | Container for the parameters to the ListChangeSets operation. Returns the ID and status of each active change set for a stack. For example, AWS CloudFormation lists change sets that are in the CREATE_IN_PROGRESS or CREATE_PENDING state. |
| ListChangeSetsResponse | The output for the ListChangeSets action. |
| ListExportsRequest | Container for the parameters to the ListExports operation. Lists all exported output values in the account and region in which you call this action. Use this action to see the exported output values that you can import into other stacks. To import values, use the Fn::ImportValue function. For more information, see AWS CloudFormation Export Stack Output Values. |
| ListExportsResponse | This is the response object from the ListExports operation. |
| ListImportsRequest | Container for the parameters to the ListImports operation. Lists all stacks that are importing an exported output value. To modify or remove an exported output value, first use this action to see which stacks are using it. To see the exported output values in your account, see ListExports. For more information about importing an exported output value, see the |
| ListImportsResponse | This is the response object from the ListImports operation. |
| ListStackResourcesRequest | Container for the parameters to the ListStackResources operation. Returns descriptions for all resources of the specified stack. For deleted stacks, ListStackResources returns resource information for up to 90 days after the stack has been deleted. |
| ListStackResourcesResponse | Returns information about the ListStackResourcesResult response and response metadata. |
| ListStackResourcesResult | The output for a ListStackResources action. |
| ListStacksRequest | Container for the parameters to the ListStacks operation. Returns the summary information for stacks whose status matches the specified StackStatusFilter. Summary information for stacks that have been deleted is kept for 90 days after the stack is deleted. If no StackStatusFilter is specified, summary information for all stacks is returned (including existing stacks and stacks that have been deleted). |
| ListStacksResponse | Returns information about the ListStacksResult response and response metadata. |
| ListStacksResult | The output for ListStacks action. |
| Output | The Output data type. |
| Parameter | The Parameter data type. |
| ResourceChange | The ResourceChange structure describes the resource and the action that AWS CloudFormation will perform on it if you execute this change set. |
| ResourceChangeDetail | For a resource with Modify as the action, the ResourceChange structure describes the changes AWS CloudFormation will make to that resource. |
| ResourceTargetDefinition | The field that AWS CloudFormation will change, such as the name of a resource's property, and whether the resource will be recreated. |
| SetStackPolicyRequest | Container for the parameters to the SetStackPolicy operation. Sets a stack policy for a specified stack. |
| Stack | The Stack data type. |
| StackEvent | The StackEvent data type. |
| StackResource | The StackResource data type. |
| StackResourceDetail | The StackResourceDetail data type. |
| StackResourceSummary | Contains high-level information about the specified stack resource. |
| StackSummary | The StackSummary Data Type |
| Tag | The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack. |
| TemplateParameter | The TemplateParameter data type. |
| UpdateStackRequest | The input for UpdateStack action. |
| UpdateStackResponse | Returns information about the UpdateStack response and response metadata. |
| UpdateStackResult | The output for a UpdateStack action. |
| ValidateTemplateRequest | Container for the parameters to the ValidateTemplate operation. Validates a specified template. |
| ValidateTemplateResponse | The output for ValidateTemplate action. |
| ValidateTemplateResult | The output for ValidateTemplate action. |