C# Class Amazon.SQS.AmazonSQSClient

Adds a permission to a queue for a specific principal. This allows sharing access to the queue.

When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.

Adds a permission to a queue for a specific principal. This allows sharing access to the queue.

When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.

Initiates the asynchronous execution of the AddPermission operation.

Adds a permission to a queue for a specific principal. This allows sharing access to the queue.

When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.

Initiates the asynchronous execution of the AddPermission operation.

Adds a permission to a queue for a specific principal. This allows sharing access to the queue.

When you create a queue, you have full control access rights for the queue. Only you, the owner of the queue, can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.

Constructs AmazonSQSClient with the credentials loaded from the application's default configuration, and if unsuccessful from the Instance Profile service on an EC2 instance. Example App.config with credentials set. <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="AWSProfileName" value="AWS Default"/> </appSettings> </configuration>

Constructs AmazonSQSClient with AWS Credentials

Constructs AmazonSQSClient with AWS Credentials and an AmazonSQSClient Configuration object.

Constructs AmazonSQSClient with AWS Credentials

Constructs AmazonSQSClient with the credentials loaded from the application's default configuration, and if unsuccessful from the Instance Profile service on an EC2 instance. Example App.config with credentials set. <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="AWSProfileName" value="AWS Default"/> </appSettings> </configuration>

Constructs AmazonSQSClient with the credentials loaded from the application's default configuration, and if unsuccessful from the Instance Profile service on an EC2 instance. Example App.config with credentials set. <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="AWSProfileName" value="AWS Default"/> </appSettings> </configuration>

Constructs AmazonSQSClient with AWS Access Key ID and AWS Secret Key

Constructs AmazonSQSClient with AWS Access Key ID, AWS Secret Key and an AmazonSQSClient Configuration object.

Constructs AmazonSQSClient with AWS Access Key ID and AWS Secret Key

Constructs AmazonSQSClient with AWS Access Key ID and AWS Secret Key

Constructs AmazonSQSClient with AWS Access Key ID, AWS Secret Key and an AmazonSQSClient Configuration object.

Constructs AmazonSQSClient with AWS Access Key ID and AWS Secret Key

This is a utility method which updates the policy of a queue to allow the S3 bucket to publish events to it.

This is a utility method which updates the policy of a queue to allow the S3 bucket to publish events to it.

Initiates the asynchronous execution of the AddPermission operation.

Initiates the asynchronous execution of the ChangeMessageVisibility operation.

Initiates the asynchronous execution of the ChangeMessageVisibilityBatch operation.

Initiates the asynchronous execution of the CreateQueue operation.

Initiates the asynchronous execution of the DeleteMessage operation.

Initiates the asynchronous execution of the DeleteMessageBatch operation.

Initiates the asynchronous execution of the DeleteQueue operation.

Initiates the asynchronous execution of the GetQueueAttributes operation.

Initiates the asynchronous execution of the GetQueueUrl operation.

Initiates the asynchronous execution of the ListDeadLetterSourceQueues operation.

Initiates the asynchronous execution of the ListQueues operation.

Initiates the asynchronous execution of the PurgeQueue operation.

Initiates the asynchronous execution of the ReceiveMessage operation.

Initiates the asynchronous execution of the RemovePermission operation.

Initiates the asynchronous execution of the SendMessage operation.

Initiates the asynchronous execution of the SendMessageBatch operation.

Initiates the asynchronous execution of the SetQueueAttributes operation.

Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. Thus, you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

For example, you have a message and with the default visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message is extended by 10 minutes beyond the time of the ChangeMessageVisibility action. This results in a total visibility timeout of 13 minutes. You can continue to call the ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected.

A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue.

For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages.

For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.

Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. Thus, you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

For example, you have a message and with the default visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message is extended by 10 minutes beyond the time of the ChangeMessageVisibility action. This results in a total visibility timeout of 13 minutes. You can continue to call the ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected.

A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue.

For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages.

For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.

Initiates the asynchronous execution of the ChangeMessageVisibility operation.

Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. Thus, you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

For example, you have a message and with the default visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message is extended by 10 minutes beyond the time of the ChangeMessageVisibility action. This results in a total visibility timeout of 13 minutes. You can continue to call the ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected.

A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue.

For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages.

For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.

Initiates the asynchronous execution of the ChangeMessageVisibility operation.

Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value is 12 hours. Thus, you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

For example, you have a message and with the default visibility timeout of 5 minutes. After 3 minutes, you call ChangeMessageVisiblity with a timeout of 10 minutes. At that time, the timeout for the message is extended by 10 minutes beyond the time of the ChangeMessageVisibility action. This results in a total visibility timeout of 13 minutes. You can continue to call the ChangeMessageVisibility to extend the visibility timeout to a maximum of 12 hours. If you try to extend the visibility timeout beyond 12 hours, your request is rejected.

A message is considered to be in flight after it's received from a queue by a consumer, but not yet deleted from the queue.

For standard queues, there can be a maximum of 120,000 inflight messages per queue. If you reach this limit, Amazon SQS returns the OverLimit error message. To avoid reaching the limit, you should delete messages from the queue after they're processed. You can also increase the number of queues you use to process your messages.

For FIFO queues, there can be a maximum of 20,000 inflight messages per queue. If you reach this limit, Amazon SQS returns no error messages.

Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility . The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility . The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Initiates the asynchronous execution of the ChangeMessageVisibilityBatch operation.

Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility . The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Initiates the asynchronous execution of the ChangeMessageVisibilityBatch operation.

Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility . The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request. Keep the following caveats in mind:

• If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.

  You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.

• If you don't provide a value for an attribute, the queue is created with the default value for the attribute.

• If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.

To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:

• If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.

• If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.

Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request. Keep the following caveats in mind:

• If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.

  You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.

• If you don't provide a value for an attribute, the queue is created with the default value for the attribute.

• If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.

To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:

• If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.

• If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.

Initiates the asynchronous execution of the CreateQueue operation.

Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request. Keep the following caveats in mind:

• If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.

  You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.

• If you don't provide a value for an attribute, the queue is created with the default value for the attribute.

• If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.

To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:

• If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.

• If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.

Initiates the asynchronous execution of the CreateQueue operation.

Creates a new standard or FIFO queue or returns the URL of an existing queue. You can pass one or more attributes in the request. Keep the following caveats in mind:

• If you don't specify the FifoQueue attribute, Amazon SQS creates a standard queue.

  You can't change the queue type after you create it and you can't convert an existing standard queue into a FIFO queue. You must either create a new FIFO queue for your application or delete your existing standard queue and recreate it as a FIFO queue. For more information, see Moving From a Standard Queue to a FIFO Queue in the Amazon SQS Developer Guide.

• If you don't provide a value for an attribute, the queue is created with the default value for the attribute.

• If you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

To successfully create a new queue, you must provide a queue name that adheres to the limits related to queues and is unique within the scope of your queues.

To get the queue URL, use the GetQueueUrl action. GetQueueUrl requires only the QueueName parameter. be aware of existing queue names:

• If you provide the name of an existing queue along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue.

• If the queue name, attribute names, or attribute values don't match an existing queue, CreateQueue returns an error.

Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the MessageId you receive when you send the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes the message.

The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. If you don't provide the most recently received receipt handle for the message when you use the DeleteMessage action, the request succeeds, but the message might not be deleted.

For standard queues, it is possible to receive a message even after you deleting it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you on a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.

Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the MessageId you receive when you send the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes the message.

The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. If you don't provide the most recently received receipt handle for the message when you use the DeleteMessage action, the request succeeds, but the message might not be deleted.

For standard queues, it is possible to receive a message even after you deleting it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you on a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.

Initiates the asynchronous execution of the DeleteMessage operation.

Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the MessageId you receive when you send the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes the message.

The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. If you don't provide the most recently received receipt handle for the message when you use the DeleteMessage action, the request succeeds, but the message might not be deleted.

For standard queues, it is possible to receive a message even after you deleting it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you on a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.

Initiates the asynchronous execution of the DeleteMessage operation.

Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the MessageId you receive when you send the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes the message.

The receipt handle is associated with a specific instance of receiving the message. If you receive a message more than once, the receipt handle you get each time you receive the message is different. If you don't provide the most recently received receipt handle for the message when you use the DeleteMessage action, the request succeeds, but the message might not be deleted.

For standard queues, it is possible to receive a message even after you deleting it. This might happen on rare occasions if one of the servers storing a copy of the message is unavailable when you send the request to delete the message. The copy remains on the server and might be returned to you on a subsequent receive request. You should ensure that your application is idempotent, so that receiving a message more than once does not cause issues.

Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage . The result of the action on each message is reported individually in the response.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage . The result of the action on each message is reported individually in the response.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Initiates the asynchronous execution of the DeleteMessageBatch operation.

Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage . The result of the action on each message is reported individually in the response.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Initiates the asynchronous execution of the DeleteMessageBatch operation.

Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage . The result of the action on each message is reported individually in the response.

Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

Deletes the queue specified by the QueueUrl, even if the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.

Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.

When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.

When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

Deletes the queue specified by the QueueUrl, even if the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.

Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.

When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.

When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

Initiates the asynchronous execution of the DeleteQueue operation.

Deletes the queue specified by the QueueUrl, even if the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.

Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.

When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.

When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

Initiates the asynchronous execution of the DeleteQueue operation.

Deletes the queue specified by the QueueUrl, even if the queue is empty. If the specified queue doesn't exist, Amazon SQS returns a successful response.

Be careful with the DeleteQueue action: When you delete a queue, any messages in the queue are no longer available.

When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after 60 seconds the queue and the message you sent no longer exist.

When you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.

Finishes the asynchronous execution of the AddPermission operation.

Finishes the asynchronous execution of the ChangeMessageVisibility operation.

Finishes the asynchronous execution of the ChangeMessageVisibilityBatch operation.

Finishes the asynchronous execution of the CreateQueue operation.

Finishes the asynchronous execution of the DeleteMessage operation.

Finishes the asynchronous execution of the DeleteMessageBatch operation.

Finishes the asynchronous execution of the DeleteQueue operation.

Finishes the asynchronous execution of the GetQueueAttributes operation.

Finishes the asynchronous execution of the GetQueueUrl operation.

Finishes the asynchronous execution of the ListDeadLetterSourceQueues operation.

Finishes the asynchronous execution of the ListQueues operation.

Finishes the asynchronous execution of the PurgeQueue operation.

Finishes the asynchronous execution of the ReceiveMessage operation.

Finishes the asynchronous execution of the RemovePermission operation.

Finishes the asynchronous execution of the SendMessage operation.

Finishes the asynchronous execution of the SendMessageBatch operation.

Finishes the asynchronous execution of the SetQueueAttributes operation.

Gets attributes for the specified queue.

Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:

&Attribute.1=this

&Attribute.2=that

Gets attributes for the specified queue.

Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:

&Attribute.1=this

&Attribute.2=that

Initiates the asynchronous execution of the GetQueueAttributes operation.

Gets attributes for the specified queue.

Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:

&Attribute.1=this

&Attribute.2=that

Initiates the asynchronous execution of the GetQueueAttributes operation.

Gets attributes for the specified queue.

Some actions take lists of parameters. These lists are specified using the param.n notation. Values of n are integers starting from 1. For example, a parameter list with two elements looks like this:

&Attribute.1=this

&Attribute.2=that

Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.

To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.

Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.

To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.

Initiates the asynchronous execution of the GetQueueUrl operation.

Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.

To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.

Initiates the asynchronous execution of the GetQueueUrl operation.

Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.

To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or see Shared Queues in the Amazon SQS Developer Guide.

Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.

For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.

Initiates the asynchronous execution of the ListDeadLetterSourceQueues operation.

Initiates the asynchronous execution of the ListDeadLetterSourceQueues operation.

Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.

Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.

Initiates the asynchronous execution of the ListQueues operation.

Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.

Initiates the asynchronous execution of the ListQueues operation.

Returns a list of your queues. The maximum number of queues that can be returned is 1,000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name that begins with the specified value are returned.

Deletes the messages in a queue specified by the QueueURL parameter.

When you use the PurgeQueue action, you can't retrieve a message deleted from a queue.

When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling the PurgeQueue action are deleted. Messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue is called might be received, but are deleted within the next minute.

Deletes the messages in a queue specified by the QueueURL parameter.

When you use the PurgeQueue action, you can't retrieve a message deleted from a queue.

When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling the PurgeQueue action are deleted. Messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue is called might be received, but are deleted within the next minute.

Initiates the asynchronous execution of the PurgeQueue operation.

Deletes the messages in a queue specified by the QueueURL parameter.

When you use the PurgeQueue action, you can't retrieve a message deleted from a queue.

When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling the PurgeQueue action are deleted. Messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue is called might be received, but are deleted within the next minute.

Initiates the asynchronous execution of the PurgeQueue operation.

Deletes the messages in a queue specified by the QueueURL parameter.

When you use the PurgeQueue action, you can't retrieve a message deleted from a queue.

When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling the PurgeQueue action are deleted. Messages sent to the queue while it is being purged might be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue is called might be received, but are deleted within the next minute.

Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.

Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.

For each message returned, the response includes the following:

• The message body.

• An MD5 digest of the message body. For information on MD5, see RFC1321.

• The MessageId you received when you sent the message to the queue.

• The receipt handle.

• The message attributes.

• An MD5 digest of the message attributes.

The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.

You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.

Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.

Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.

For each message returned, the response includes the following:

• The message body.

• An MD5 digest of the message body. For information on MD5, see RFC1321.

• The MessageId you received when you sent the message to the queue.

• The receipt handle.

• The message attributes.

• An MD5 digest of the message attributes.

The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.

You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.

Initiates the asynchronous execution of the ReceiveMessage operation.

Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.

Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.

For each message returned, the response includes the following:

• The message body.

• An MD5 digest of the message body. For information on MD5, see RFC1321.

• The MessageId you received when you sent the message to the queue.

• The receipt handle.

• The message attributes.

• An MD5 digest of the message attributes.

The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.

You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.

Initiates the asynchronous execution of the ReceiveMessage operation.

Retrieves one or more messages (up to 10), from the specified queue. Using the WaitTimeSeconds parameter enables long-poll support. For more information, see Amazon SQS Long Polling in the Amazon SQS Developer Guide.

Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. Thus, only the messages on the sampled machines are returned. If the number of messages in the queue is small (fewer than 1,000), you most likely get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response. If this happens, repeat the request.

For each message returned, the response includes the following:

• The message body.

• An MD5 digest of the message body. For information on MD5, see RFC1321.

• The MessageId you received when you sent the message to the queue.

• The receipt handle.

• The message attributes.

• An MD5 digest of the message attributes.

The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.

You can provide the VisibilityTimeout parameter in your request. The parameter is applied to the messages that Amazon SQS returns in the response. If you don't include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.

A message that isn't deleted or a message whose visibility isn't extended before the visibility timeout expires counts as a failed receive. Depending on the configuration of the queue, the message might be sent to the dead letter queue.

Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.

Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.

Initiates the asynchronous execution of the RemovePermission operation.

Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.

Initiates the asynchronous execution of the RemovePermission operation.

Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.

Delivers a message to the specified queue.

The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:

• #x9

• #xA

• #xD

• #x20 to #xD7FF

• #xE000 to #xFFFD

• #x10000 to #x10FFFF

For more information, see RFC1321. If you send any characters that aren't included in this list, your request is rejected.

Delivers a message to the specified queue.

The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:

• #x9

• #xA

• #xD

• #x20 to #xD7FF

• #xE000 to #xFFFD

• #x10000 to #x10FFFF

For more information, see RFC1321. If you send any characters that aren't included in this list, your request is rejected.

Initiates the asynchronous execution of the SendMessage operation.

Delivers a message to the specified queue.

The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:

• #x9

• #xA

• #xD

• #x20 to #xD7FF

• #xE000 to #xFFFD

• #x10000 to #x10FFFF

For more information, see RFC1321. If you send any characters that aren't included in this list, your request is rejected.

Initiates the asynchronous execution of the SendMessage operation.

Delivers a message to the specified queue.

The following list shows the characters (in Unicode) that are allowed in your message, according to the W3C XML specification:

• #x9

• #xA

• #xD

• #x20 to #xD7FF

• #xE000 to #xFFFD

• #x10000 to #x10FFFF

For more information, see RFC1321. If you send any characters that aren't included in this list, your request is rejected.

Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.

The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).

If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.

Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.

The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).

If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.

Initiates the asynchronous execution of the SendMessageBatch operation.

Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.

The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).

If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.

Initiates the asynchronous execution of the SendMessageBatch operation.

Delivers up to ten messages to the specified queue. This is a batch version of SendMessage . For a FIFO queue, multiple messages within a single batch are enqueued in the order they are sent.

The result of sending each message is reported individually in the response. Because the batch request can result in a combination of successful and unsuccessful actions, you should check for batch errors even when the call returns an HTTP status code of 200.

The maximum allowed individual message size and the maximum total payload size (the sum of the individual lengths of all of the batched messages) are both 256 KB (262,144 bytes).

If you don't specify the DelaySeconds parameter for an entry, Amazon SQS uses the default value for the queue.

Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.

In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.

In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

Initiates the asynchronous execution of the SetQueueAttributes operation.

Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.

In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

Initiates the asynchronous execution of the SetQueueAttributes operation.

Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.

In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.

Creates the signer for the service.

Customize the pipeline

Disposes the service client.

Helper method for AuthorizeS3ToSendMessage()